Best Reciprocating Saw Blade for Cast Iron (2026)
Five reciprocating saw blades for cast iron, compared by carbide teeth and diamond grit, length, cutting range and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEZARC 9-Inch Carbide9.7/10View on Amazon - 2
Best Diamond GritDiablo DS0930DGX9.6/10View on Amazon - 3
Best Short BladeDiablo DS0408CF39.6/10View on Amazon - 4
Best 3-Packjinmg JM0930DG039.5/10View on Amazon
A cast iron pipe needs a new section, and the cut has to land clean through thick, abrasive metal without burning through blade after blade. The wrong edge dulls fast on cast iron and leaves a ragged cut. This guide compares the best reciprocating saw blade for cast iron by edge type, length, tooth and grit, and pack size.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall EZARC 9-Inch Carbide: 9-inch carbide blade, 8 TPI, up to 50x longer life than bi-metal for thick metal. Check price on Amazon
- Best Diamond Grit Diablo DS0930DGX: 9-inch diamond grit, thin kerf, up to 6X longer life for cast iron and masonry. Check price on Amazon
- Best Short Blade Diablo DS0408CF3: 4-inch carbide blade in a 3-pack, 8 TPI, Perma-Shield coating for thick metal. Check price on Amazon
- Best 3-Pack jinmg JM0930DG03: 3-pack of 9-inch diamond-grit blades with thin kerf for cast iron and masonry. Check price on Amazon
The machines

EZARC Carbide Reciprocating Saw Blade
A 9-inch carbide reciprocating saw blade with 8 TPI for thick metal, cutting cast iron, alloy steel, stainless steel, rebar and car beams.
Pros
- Carbide teeth with up to 50x longer life than bi-metal
- 8 TPI design for thick metal from 1/8 in. to 1/2 in.
- 1/2-inch universal shank fits major reciprocating saws
- Each carbide tooth precision ground and individually welded
Cons
- Only 1 blade in the pack
- No coating is named for heat and friction
- Metal cutting only, no masonry or block work named
- 9-inch length needs clearance for tight cuts

Diablo Diamond Grit Reciprocating Saw Blade
A 9-inch diamond grit reciprocating saw blade with a thin kerf for cast iron, fiber cement, masonry and fiberglass.
Pros
- Diamond grit edge with up to 6X longer life than standard blades
- Thin kerf design for fast, controlled cutting
- Perma-Shield coating resists heat, gumming and corrosion
- Sturdy backing for straighter cuts in dense material
Cons
- Limited tooling warranty with no term length given
- Diamond grit suits abrasive work, not toothed metal cutting
- Single blade in the pack

Diablo Steel Demon Carbide Teeth Reciprocating Saw
A 4-inch carbide teeth reciprocating saw blade in a 3-pack with 8 TPI and Perma-Shield coating for thick metal.
Pros
- Carbide teeth with up to 50X longer cutting than standard bi-metal
- 8 TPI geometry for clean finishes in medium metal
- Oversized 1-inch blade body for straighter cuts with less vibration
- Perma-Shield coating resists heat and friction
Cons
- 4-inch length limits deep cuts
- Cutting range is 3/16 in. to 9/16 in. only
- Three identical blades, no length variety

BOSCH RCB9DG 1-Piece 9 In. 50 Grit Diamond-Grit
A 9-inch 50 grit diamond-grit edge reciprocating saw blade for cast iron, block, cinder block and brick.
Pros
- Diamond grit edge for cast iron, block, brick and pipe
- Up to 3-times faster and 3-times longer life than carbide grit blades
- Vacuum brazed diamond grit for heavy use
- 50 grit edge for abrasive materials
Cons
- No warranty is stated
- Single blade in the pack
- Grit edge gives no tooth count for metal work

3 Pack 9 inch 40-50 Diamond-Grit Reciprocating Saw
A 3-pack of 9-inch 40-50 diamond-grit reciprocating saw blades with a thin kerf for cast iron, masonry, fiber cement and fiberglass.
Pros
- Diamond grit edge outlasting standard blades by up to eight times
- Thin kerf for fast cuts with less binding and waste
- Rigid core limits vibration and deflection
- Universal fit for Bosch, DeWalt, Milwaukee and other major brands
Cons
- No coating is named for heat and gumming
- Three identical blades, no length variety
- No warranty term is stated
- Compatibility is framed against the Diablo DS0930DGX
Other welders and gear to compare
DEWALT Reciprocating Saw Blade Set for Metal and WoodcuttingCheck price on Amazon
DEWALT Bi-Metal Reciprocating Saw Blade Multi TPICheck price on Amazon
EZARC Arc Edge Bi-Metal Reciprocating Saw BladeCheck price on Amazon
MILWAUKEE'S 9" L Reciprocating Saw BladeCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Length | Edge | Cutting range | Pack | Warranty |
|---|---|---|---|---|---|---|
| EZARC 9-Inch Carbide | 9.7/10 | 9-inch | Carbide teeth | 1/8 in. to 1/2 in. | 1 | Not stated |
| Diablo DS0930DGX | 9.6/10 | 9-inch | Diamond grit | Not stated | 1 | Freud limited tooling warranty |
| Diablo DS0408CF3 | 9.6/10 | 4-inch | Carbide teeth | 3/16 in. to 9/16 in. | 3 | Not stated |
| Bosch RCB9DG | 9.6/10 | 9-inch | 50 grit diamond grit | Not stated | 1 | Not stated |
| jinmg JM0930DG03 | 9.5/10 | 9-inch | 40-50 diamond grit | Not stated | 3 | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 29 October 2026.
What the listings tell you
The five picks split into two edge families: carbide teeth and diamond grit. The carbide picks name 8 TPI and thick metal work, while the diamond grit picks name cast iron, masonry, fiber cement and fiberglass. Lengths run from a 4-inch carbide blade to 9-inch blades, and pack sizes run from single blades to 3-packs.
Buying guide: best reciprocating saw blade for cast iron
Carbide teeth or diamond grit
Carbide teeth cut metal with teeth: the EZARC and Diablo carbide picks both name 8 TPI, with the EZARC blade aimed at thick metal and the Diablo blade aimed at medium metal applications. Diamond grit cuts abrasive material with grit instead of teeth: the Bosch pick names a 50 grit edge, and the jinmg pick names 40-50 grit, both for cast iron, masonry and fiber cement. For cast iron pipe alone, either family names the material; for mixed metal and masonry work, the diamond grit picks cover more materials.
Length and tooth count
Length decides how deep a cut can reach. The 9-inch blades cover pipe and block work, while the 4-inch Diablo carbide blade suits shallower cuts in medium metal. Tooth count matters on toothed blades only: both carbide picks name 8 TPI, which the listings tie to thick and medium metal cutting. Grit blades carry no tooth count, so compare them by grit number and kerf instead.
Cutting range and kerf
Cutting range is stated only on the carbide picks: the EZARC blade names 1/8 in. to 1/2 in. for metal cutting, and the Diablo carbide blade names 3/16 in. to 9/16 in. for metal. Kerf is named on the diamond grit side: the Diablo diamond grit blade and the jinmg blades both name a thin kerf design, which the listings tie to faster cutting with less binding and waste. Where a listing gives no range or kerf, judge it on edge type and length alone.
Pack size and fit
Pack size changes how many cuts a purchase covers. The Diablo carbide blade and the jinmg blades come in 3-packs, while the EZARC, Bosch and Diablo diamond grit picks come as single blades. Fit is broad on the listings that state it: the EZARC blade names a 1/2-inch universal shank for major reciprocating saws, and the jinmg listing names fit for Bosch, DeWalt, Milwaukee, SKIL, Makita, Black and Decker, Ryobi, Porter Cable, Hitachi, Flex and Hilti.
Before You Strike an Arc
- Check the shank fit before the cut: the EZARC listing names a 1/2-inch universal shank, and the jinmg listing names fit for Bosch, DeWalt, Milwaukee and other major brands.
- Match the edge to the material: carbide teeth for thick metal, diamond grit for cast iron, block and masonry.
- Check pack count before starting: the Diablo carbide and jinmg picks come in 3-packs, while the other picks come as single blades.
- Check the cutting range on the listing: the EZARC blade names 1/8 in. to 1/2 in., and the Diablo carbide blade names 3/16 in. to 9/16 in.
FAQ for welders
Can a carbide blade cut cast iron?
Yes, on these listings. The EZARC carbide blade names cast iron among thick metal materials, and the Diablo carbide blade names cast iron pipe among high strength alloys and stainless steel. Diamond grit blades also name cast iron, so the choice turns on what else the job cuts.
What is the difference between carbide teeth and diamond grit?
Carbide teeth are teeth on a blade body: both carbide picks name 8 TPI, and the Diablo carbide blade adds an oversized 1-inch blade body for straighter cuts. Diamond grit is an abrasive edge with a grit number: the Bosch pick names 50 grit, and the jinmg pick names 40-50 grit, for abrasive materials such as cast iron, brick and masonry.
What length blade works for cast iron pipe?
The 9-inch blades suit pipe and block work, while the 4-inch Diablo carbide blade suits shallower cuts. Length alone does not decide the cut: edge type and cutting range matter as much, and the 4-inch blade names a 3/16 in. to 9/16 in. range for metal.
Do these blades fit any reciprocating saw?
Fit is stated broadly where the listings state it. The EZARC blade names a 1/2-inch universal shank for major reciprocating saws, and the jinmg listing names fit for Bosch, DeWalt, Milwaukee, SKIL, Makita, Black and Decker, Ryobi, Porter Cable, Hitachi, Flex and Hilti. The Diablo diamond grit listing names reciprocating saw compatibility in general terms.
How long does a diamond grit blade last?
The listings give maker claims with different baselines, so they do not compare directly. The Bosch listing claims up to 3-times longer life than carbide grit blades, the Diablo diamond grit listing claims up to 6X longer life than standard blades, and the jinmg listing claims up to eight times longer than standard blades. Read the baseline in each claim before comparing life figures.
Also see our best hole saw for cast iron. Also see our tig vs mig for cast iron. Also see our jigsaw vs reciprocating saw for metal. Also see our carbide vs HSS end mill. Also see our chop saw blade vs cut off wheel. Also see our welding table vs sawhorse. Also see our air vs electric angle grinder.
Scoring, line by line
Each blade is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Blades have no electrical safety listing to state, so every blade here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| EZARC 9-Inch Carbide | 9.7 | 32 | 21 | 21 | n/a | 0 |
| Diablo DS0930DGX | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Diablo DS0408CF3 | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Bosch RCB9DG | 9.6 | 29 | 20 | 20 | n/a | 0 |
| jinmg JM0930DG03 | 9.5 | 28 | 19 | 19 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.





