Best Hand Held Band Saw (2026)
5 hand held band saws for metal, pipe and wood, compared by power, cut capacity, speed, form and warranty, from cordless portabands to a benchtop saw.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEcarke 20V Portaband9.6/10View on Amazon - 2
Best Corded PickMAXXT 2-in-1 Band Saw9.6/10View on Amazon - 3
Best 2-in-1 PickDOVAMAN Portable Saw9.5/10View on Amazon - 4
Best Lightweight PickVEVOR 20V Portaband9.4/10View on Amazon
A length of pipe needs cutting where it sits, and a steel angle needs trimming before it fits the frame. A hand held band saw takes the cut to the work, with a blade that runs clean and leaves a straight edge for the weld.
This guide covers the best hand held band saw, with 5 saws compared by power, cut capacity, speed, form and warranty. 2 run on 20V batteries, 3 run on mains power, and 1 is a benchtop saw in a handheld roundup.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Ecarke 20V Portaband: 20V cordless brushless saw with 6 speeds, a 2-1/2 in cut and a stated 5-year warranty. Check price on Amazon
- Best Corded Pick MAXXT 2-in-1 Band Saw: 10A saw with a 5-inch deep cut, a table base on wheels and a stated 1-year warranty. Check price on Amazon
- Best 2-in-1 Pick DOVAMAN Portable Saw: 10A portable saw with a detachable base, 6 speeds and a 0 to 45-degree angle. Check price on Amazon
- Best Lightweight Pick VEVOR 20V Portaband: 20V cordless brushless saw at 8.49 lb, with a 2.56 in deep cut and a hang hook. Check price on Amazon
The machines

2-1/2" Cordless Band Saw Compatible with Dewalt
A 20V cordless brushless band saw for DeWalt 20V batteries, with 6 speeds, a 2-1/2 in cut, an LED light, a hook and a stated 5-year warranty.
Pros
- Brushless motor with 6 variable speeds
- 630 SFPM no-load speed for smooth cutting
- Tool-free blade change with a safety lock switch
- Stated 5-year manufacturer warranty
Cons
- Battery is not included; it is a tool only
- 2-1/2 in capacity is less than the 5-inch saws here
- No blades are listed as included
- No blade size is stated

MAXXT 2-in-1 Band Saw with Table Saw Base
A 10A 2-in-1 band saw with a table saw base on wheels, a 5-inch deep cut, variable speed from 60 to 420 ft/min and a stated 1-year warranty.
Pros
- 5-inch deep cut for round and square tubes
- Table saw base on carrying wheels
- Emergency switch, auto-stop and self-locking switch
- Kit includes 3 blades, clamps and Allen wrenches
Cons
- Listed weight is 39.85 lb with the table base
- No cordless option is stated
- No blade size beyond TPI is stated
- Aluminum body is called lightweight, yet the listed weight is high

DOVAMAN Portable Band Saw, 10A Variable Speed
A 10A portable band saw with a 5-inch deep cut, 6 speeds from 2.3 to 7.9 FT/s, a 0 to 45-degree angle and a detachable base with 2 blades.
Pros
- 5-inch deep cut for metal, wood and PVC
- 6 variable speeds for different materials
- 2-in-1 handheld and benchtop use with a detachable base
- Kit includes 2 blades, a base and wrenches
Cons
- No warranty term is stated, only 24/7 customer support
- No weight is stated
- No blade size is stated
- No LED light is stated, unlike the other corded picks

VEVOR 20 V Portable Band Saw
A 20V cordless brushless portaband with a 360W motor, a 2.56-inch deep cut, variable speed from 0 to 192 m/min, an LED light and a hang hook.
Pros
- 20V cordless brushless motor, 360W
- Lightweight at 8.49 lb, with a hang hook
- Quick-change blade lever for fast blade swaps
- LED sight light for dark work areas
Cons
- 2.56 in capacity is less than the 5-inch saws here
- No warranty term is stated
- Bare tool only; the battery is not included
- No blade guard is stated

KFMK Tabletop Band Saw, 5’’ Cutting, 137-472 FPM
A tabletop band saw with a 10A motor, a 5-inch cutting capacity, variable speed from 137 to 472 FPM and a dual workbench for metal, wood and PVC.
Pros
- 5-inch cutting capacity for metal, wood and PVC
- Variable speed from 137 to 472 FPM
- Dual workbench: large bench and small precision bench
- Eyeshield and LED spotlight included
Cons
- A benchtop saw, not a handheld saw
- Heaviest saw here, at the listed weight
- No warranty term is stated
- No blades are listed as included
Other welders and gear to compare
WEN 9-Inch Band SawCheck price on Amazon
MILWAUKEE'S Band SawCheck price on Amazon
VEVOR Portable Band SawCheck price on Amazon
REXBETI 11-Inch Folding SawCheck price on Amazon
WEN Portable Band Saw for MetalCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Power | Cut capacity | Speed | Form | Warranty (stated) |
|---|---|---|---|---|---|---|
| Ecarke 20V Portaband | 9.6/10 | 20V cordless, brushless | 2-1/2 in | 630 SFPM | Handheld | 5 years |
| MAXXT 2-in-1 Band Saw | 9.6/10 | 10A corded | 5 in | 60 to 420 ft/min | Handheld or table | 1 year |
| DOVAMAN Portable Saw | 9.5/10 | 10A corded | 5 in | 2.3 to 7.9 FT/s | Handheld or benchtop | Not stated |
| VEVOR 20V Portaband | 9.4/10 | 20V cordless, brushless, 360W | 2.56 in | 0 to 192 m/min | Handheld | Not stated |
| KFMK Tabletop Saw | 9.3/10 | 10A corded | 5 in | 137 to 472 FPM | Benchtop | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 3 November 2026. Speeds are as listed, in the units each listing uses.
Buying guide: best hand held band saw
Cordless or corded
2 saws here run on 20V batteries: the Ecarke fits DeWalt 20V batteries and the VEVOR is a 20V bare tool, so the battery is not included with either. The other 3 run on mains power at 10A. Cordless suits overhead cuts and tight spots; corded suits long cutting sessions at the bench.
Cut capacity
Capacity decides what the saw can take in one pass. The DOVAMAN, MAXXT and KFMK each list a 5-inch deep cut, while the Ecarke lists 2-1/2 inches and the VEVOR lists 2.56 inches. The MAXXT also lists round tubes up to 120 mm without the base and 115 mm with it, and square tubes of 120 by 120 mm without the base and 100 by 100 mm with it.
Speed
Speeds here are listed in different units, so compare within each listing. The Ecarke lists 630 SFPM, the VEVOR lists 0 to 192 m/min, the DOVAMAN lists 6 speeds from 2.3 to 7.9 FT/s, the MAXXT lists 60 to 420 ft/min, and the KFMK lists 137 to 472 FPM. A speed dial helps: the Ecarke and DOVAMAN each list 6 speeds, and the MAXXT lists 1 to 6 levels.
Handheld or benchtop
Handheld saws cut where the work sits. The DOVAMAN and MAXXT also mount to a detachable base for benchtop work, and the MAXXT base has carrying wheels. The KFMK is a tabletop saw with a liftable worktable, not a handheld saw, so it suits bench work only.
Blades and warranty
Blades are part of the deal: the DOVAMAN kit includes 2 blades, and the MAXXT kit includes 3 metal cutting blades at 10/14 TPI, 14/18 TPI and 24 TPI. The Ecarke lists a 5-year manufacturer warranty and the MAXXT lists a 1-year warranty; the other listings state no warranty term.
Use as directed. Keep the blade guard in place, use the safety lock or self-locking switch, and keep hands clear of the blade path. Wear eye protection, and clear the area before cutting.
Before You Strike an Arc
- Check the power: the Ecarke and VEVOR run on 20V batteries, and the battery is not included with either.
- Check the blades on arrival: the DOVAMAN kit includes 2 blades and the MAXXT kit includes 3 blades.
- Check the base: the DOVAMAN and MAXXT bases detach, and the MAXXT base has carrying wheels.
- Check the fit: the MAXXT lists round tubes up to 120 mm without the base and 115 mm with it.
FAQ for welders
Can a band saw cut metal?
Yes, if the listing states metal cutting. The Ecarke, DOVAMAN, MAXXT and VEVOR listings all state metal cutting, and the KFMK lists metal, wood and PVC. Match the blade and speed to the metal, and check the cut capacity first.
How do I use a hand held band saw?
Hold the saw with the blade guard in place and the work clamped or steady, then let the blade do the cutting. The Ecarke lists one-handed operation with a safety lock switch, and the MAXXT lists a self-locking switch and an auto-stop function. Check the listing for the blade change lever and the speed dial before the first cut.
What is the difference between a cordless and a corded band saw?
Cordless saws run on batteries and suit overhead and tight work: the Ecarke and VEVOR run on 20V batteries. Corded saws run on mains power: the DOVAMAN, MAXXT and KFMK run at 10A. Cordless saws here list smaller cut capacities than the corded saws.
What size band saw do I need for pipe?
Match the cut capacity to the pipe: the MAXXT lists round tubes up to 120 mm without the base, and the VEVOR lists cuts up to 2.56 in by 2.56 in. The DOVAMAN, MAXXT and KFMK each list a 5-inch deep cut. Check the pipe size against the listing before ordering.
How do I change the blade on a band saw?
Follow the listing’s blade change system. The Ecarke lists a tool-free blade change with a quick-tension flip cover, the VEVOR lists a quick-change blade lever, and the MAXXT lists a tool-free blade change lever. Keep the blade guard in place after the change.
Related: metal fab tools hub, portable vs stationary band saw, and portable band saw vs jigsaw. Also see our best cordless band saw for job site. Also see our best band saw blade for stainless steel. Also see our variable pitch vs constant pitch band saw blade. Also see our portable band saw vs chop saw.
Scoring, line by line
Each saw is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety standard, so every saw here scores zero on safety; the ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Ecarke 20V Portaband | 9.6 | 30 | 21 | 21 | 0 | 4 |
| MAXXT 2-in-1 Band Saw | 9.6 | 32 | 22 | 21 | 0 | 2 |
| DOVAMAN Portable Saw | 9.5 | 30 | 21 | 20 | 0 | 0 |
| VEVOR 20V Portaband | 9.4 | 29 | 20 | 20 | 0 | 0 |
| KFMK Tabletop Saw | 9.3 | 26 | 19 | 18 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




