Bimetal vs Carbide Band Saw Blade: Which One Should You Buy?
Two bimetal band saw blades compared by teeth, speed and materials, with the carbide side missing from this comparison.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Imachinist S931212610 Bi-Metal 93-1/2" Long9.6/10View on Amazon - 2
Imachinist S93121218 93-1/2" x 1/2" x 18 TPI9.6/10View on Amazon
Verdict. Both blades in this comparison are bimetal, so no carbide blade is shown here. Between the two bimetal blades, pick the variable teeth blade for aluminum, copper and brass, and the invariable teeth blade for soft ferrous metal only.
A blade that drifts through aluminum and a blade that grabs in steel need different teeth, and the bimetal vs carbide band saw blade question comes down to what the shop cuts. This comparison covers two bimetal blades from the same maker; no carbide blade is listed here, so the carbide side has no example to measure against.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two blades

Imachinist S931212610 Bi-Metal 93-1/2" Long
A bimetal M42 blade, 93-1/2 by 1/2 inch, with 6/10 variable teeth for aluminum, copper and brass.
Pros
- M42 edge with 8% cobalt and 2% tungsten
- 6/10 variable teeth for non-ferrous metals
- Cuts aluminum, copper and brass
- Speeds stated for ferrous and non-ferrous metals
Cons
- No warranty term is stated
- 93-1/2 inch length fits only saws that take that size
- Needs the right speed: 100 to 300 FPM ferrous, 300 to 400 FPM non-ferrous
- Single blade; no spare is included

Imachinist S93121218 93-1/2" x 1/2" x 18 TPI
A bimetal M42 blade, 93-1/2 by 1/2 inch, with 18 invariable teeth for soft ferrous metal only.
Pros
- M42 cobalt edge with spring steel backing
- 18 TPI invariable teeth for soft ferrous metal
- Speeds of 100 to 300 FPM stated for ferrous metals
- Same 93-1/2 x 1/2 inch size as the 6/10 blade
Cons
- No warranty term is stated
- Soft ferrous metal only; do not cut aluminum or non-ferrous metal
- 18 TPI invariable teeth suit one tooth size only
- 93-1/2 inch length fits only saws that take that size
Other welders and gear to compare
FOXBC 32-7/8 Inch Bandsaw Blade 18 TPI for DeWalt DCS371BCheck price on Amazon
DEWALT Portable Band Saw BladeCheck price on Amazon
Imachinist S641212812 Bimetal Band Saw Blade 64-1/2" X 1/2" XCheck price on Amazon
Side by side: bimetal vs carbide band saw blade
| Blade | Gear Score | Size | Teeth | Best for | Speed |
|---|---|---|---|---|---|
| Imachinist S931212610 | 9.6/10 | 93-1/2 x 1/2 in | 6/10 variable | Non-ferrous metals | 100-300 ferrous, 300-400 non-ferrous |
| Imachinist S93121218 | 9.6/10 | 93-1/2 x 1/2 in | 18 invariable | Soft ferrous metal | 100-300 FPM |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 13 November 2026. Both blades are bimetal M42 with the same length, width and thickness; neither listing states a warranty term.
Teeth: variable or invariable
The 6/10 blade uses a variable teeth profile, and the maker lists a tooth size ladder from 6 TPI to 24 TPI. The 18 TPI blade uses an invariable teeth profile with one tooth size. The variable blade lists aluminum, copper, brass and other non-ferrous metals, while the 18 TPI blade is for soft ferrous metal only, and the maker says not to cut aluminum or other non-ferrous metal with it.
What each blade cuts
The 6/10 blade is made for non-ferrous metal: aluminum, copper and brass. The 18 TPI blade is made for soft ferrous metal only, and its title names cutting steel, iron and tubing profile. Neither blade claims the other's work, so the material on the bench decides the pick.
Blade size and build
Both blades share the same size: 93-1/2 inches long, 1/2 inch wide and 0.025 inch thick, in M42 bimetal, and both suit bandsaws that use a 93-1/2 inch by 1/2 inch blade. The 6/10 blade lists an M42 cutting edge with 8% cobalt and 2% tungsten for durability and abrasive resistance. The 18 TPI blade lists an M42 bimetal cobalt edge with a spring steel backing.
Speed
Recommended blade speed for the 6/10 blade is 100 FPM to 300 FPM for ferrous metals and 300 FPM to 400 FPM for non-ferrous metals. The 18 TPI blade lists 100 FPM to 300 FPM for ferrous metals. Run the blade at the speed the maker states for the metal in the saw; see our band saw blade speed chart.
Choose the 6/10 variable blade if
- You cut aluminum, copper or brass.
- You want a variable teeth profile across non-ferrous metals.
- Your saw runs the stated speed for the metal you cut.
- You want cobalt and tungsten in the cutting edge.
Choose the 18 TPI blade if
- You cut soft ferrous metal only.
- You cut steel, iron or tubing profile.
- You want one tooth size for repeat cuts in soft steel.
- Your saw takes a 93-1/2 inch by 1/2 inch blade.
FAQ for welders
Which blade cuts aluminum?
The 6/10 variable teeth blade. It lists aluminum, copper and brass among its materials. The 18 TPI blade is for soft ferrous metal only, and the maker says not to cut aluminum with it.
What speed should a bimetal blade run at?
It depends on the metal. The 6/10 blade lists 100 FPM to 300 FPM for ferrous metals and 300 FPM to 400 FPM for non-ferrous metals. The 18 TPI blade lists 100 FPM to 300 FPM for ferrous metals.
What does 6/10 TPI mean?
It is a variable teeth profile, with tooth spacing that varies along the blade. The maker lists a tooth size ladder from 6 TPI to 24 TPI, and the 6/10 blade sits in that range for non-ferrous work.
Do these blades fit any bandsaw?
No. Both suit bandsaws that use a 93-1/2 inch long, 1/2 inch wide blade. Check the length and width the saw takes before ordering.
Is there a carbide blade in this comparison?
No. Both blades here are bimetal, and no carbide blade is listed. A carbide example would be needed to compare the two sides on the same specs.
Related: types of band saw blades, variable pitch vs constant pitch band saw blade, band saw blade speed chart, and the metal fab tools hub.
Scoring, line by line
Both blades are scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Neither blade states a safety listing or a warranty term, so both score zero on those criteria; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Imachinist S931212610 | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Imachinist S93121218 | 9.6 | 28 | 20 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
Before you strike an arc. Wear eye and face protection, clamp the work, keep guards in place and keep gloves away from moving parts. Check the blade speed for the metal in the saw, and check the blade for damage before each cut. See the OSHA machine guarding guide and our Safety Disclaimer.




