Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Chop Saw Sizes: Blade Diameter Guide

Chop saw sizes come down to blade diameter, arbor size and thickness, and this guide matches each size to the saw and the stock.

Chop Saw Sizes: Blade Diameter Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Evolution S15CPS 15" Heavy-Duty Metal Cutting Chop SawEvolution S15CPS 15" Heavy-Duty Metal Cutting Chop Saw9.7/10View on Amazon
  2. 2Evolution S14MCS 14" Mitering Chop SawEvolution S14MCS 14" Mitering Chop Saw9.6/10View on Amazon
  3. 314-Inch 72-Tooth Cold Cut Metal Saw Blade14-Inch 72-Tooth Cold Cut Metal Saw Blade9.6/10View on Amazon

Angle iron for a gate frame, tube for a stand, flat bar for brackets: the stock sits on the bench and the cut list is long. Chop saw sizes describe the blade diameter, the arbor hole and the thickness, and matching those to the saw and the stock is the whole job.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Chop saw sizes in short

Chop saw sizes start with blade diameter. Listings in this guide show 10 inch, 12 inch and 14 inch blades, and each size fits saws built for it. The arbor hole is 1 inch on the 12 inch Luckyway and OEM blades and on the 14 inch blades listed here, while the 12 inch DEWALT blade does not state an arbor size. Thickness varies by blade: a 12 inch carbide blade lists a 0.106 inch kerf, and 14 inch abrasive wheels list 3/32 inch, 7/64 inch and 1/8 inch thickness. Tooth count and max RPM change by blade: a 12 inch Luckyway blade (on Amazon) lists 32 tooth and 80 tooth options with a max RPM of 4,500, while a 14 inch FOXBC blade lists 72 teeth and a max RPM of 1800.

Side by side

10 inch 12 inch 14 inch
Blade diameter 10 inch 12 inch 14 inch
Arbor Not stated 1 inch 1 inch
Tooth count 40 tooth 32, 40 and 80 tooth 72 tooth
Thickness or kerf Not stated 0.106 inch 0.095 inch kerf; 3/32, 7/64 and 1/8 inch
Max RPM Not stated 4,500 1800 and 4,400
Listed for Table saw, fine finish Wood Metal and stainless steel

The table lists the sizes in the listings. Where a listing does not state a figure, the table says Not stated.

When a 10 inch blade fits

A 10 inch blade suits a smaller saw. The DEWALT blade in the listings is a 10 inch, 40 tooth fine finish table saw blade, with carbide teeth for clean cuts. The listing does not state an arbor size, so check the saw manual before ordering.

When a 12 inch blade fits

A 12 inch blade is the middle size in the listings. Luckyway lists a 12 inch blade in 32 tooth general purpose and 80 tooth fine finish, with a 1 inch arbor and a 0.106 inch kerf, and a max RPM of 4,500. The 80 tooth blade suits smooth cuts in plywood, melamine, oak and pine; the 32 tooth blade suits general crosscuts. Another listing pairs the same tooth counts on a 12 inch blade with a 1 inch spindle and a conversion ring that lets the blade fit a 0.6 inch spindle. A DEWALT 12 inch 40 tooth general purpose blade is also listed, with no arbor size or max RPM stated.

When a 14 inch blade fits

A 14 inch blade is the large size in the listings, and most 14 inch listings here are metal cutting wheels and blades. DEWALT lists a 14 inch by 1/8 inch by 1 inch abrasive wheel, and the listing states a weight of 2.0 pounds. FOXBC lists a 14 inch metal cutting blade with 72 teeth, a 0.095 inch kerf, a 1 inch arbor and a max RPM of 1800, rated for studs, tubing, plates, bars and rods. Makita lists a 14 inch by 1 inch by 3/32 inch abrasive wheel, and claims up to 2 times the life of a 7/64 inch thick wheel and up to 20% faster cutting. HBSS lists a 10-pack of 14 inch cut-off wheels at 1/8 inch thick with a 1 inch arbor, rated for 4,400 RPM. For saws that run these blades, see the best chop saw for metal cutting roundup.

How to match the arbor and the thickness

The arbor hole has to match the saw spindle. The 12 inch Luckyway and OEM blades and the 14 inch blades listed here use a 1 inch arbor, while the 12 inch DEWALT blade does not state an arbor size, and a 12 inch listing includes a conversion ring that lets the blade fit a 0.6 inch spindle. Check the kerf on toothed blades and the thickness on abrasive wheels: the 12 inch Luckyway blade lists a 0.106 inch kerf, the 14 inch FOXBC blade lists a 0.095 inch kerf, and 14 inch abrasive wheels list 1/8 inch, 7/64 inch or 3/32 inch thickness.

Tooth count and blade type

Tooth count affects the finish. A 32 tooth blade is listed for general purpose cuts, an 80 tooth blade for fine finish, and the DEWALT 10 inch blade lists 40 teeth for fine finish. Abrasive wheels have no teeth: they grind through metal, and the listings rate them by thickness and max RPM, with 4,400 RPM on the HBSS and FOXBC wheels and 1800 RPM on the FOXBC toothed blade. For steel, see the best chop saw blade for steel guide, and for aluminum, the best chop saw blade for aluminum guide.

Reading a listing before you buy

Check the numbers in a listing against each other. The FOXBC 14 inch blade title claims up to 5X longer life without naming the comparison, while the bullets claim up to 3X longer than standard carbide and 25X longer versus standard grinding discs. Those figures use different comparisons, so treat the life claim with care and compare the stated specs instead: 72 teeth, a 0.095 inch kerf, a 1 inch arbor and a max RPM of 1800.

Chop saw safety. A chop saw throws sparks and chips at speed, and the wheel spins fast enough to catch loose clothing. Wear eye and face protection, clamp the work before the cut, keep guards in place, and keep gloves away from rotating parts. Let the wheel reach speed before it touches the metal, and let it stop before lifting it out of the cut. Clear dry material and anything flammable from the area. See the metal fab tools hub for more shop guides.

FAQ for welders

What chop saw size do I need for angle iron?

Match the blade to the saw, then to the stock. The 14 inch FOXBC blade in the listings is rated for studs and tubing with a wall thickness from 1/8 inch to 1/2 inch, plates and bars from 1/4 inch to 1 inch thick, and rods from 1/2 inch to 2 inch in diameter, which covers common angle iron and tube. The 12 inch and 10 inch blades in the listings are wood blades, so they suit smaller wood stock rather than angle iron.

Can I put a 14 inch blade on a 12 inch chop saw?

No. A blade has to match the diameter the saw is built for, and a 14 inch blade does not fit a 12 inch saw guard. Buy the size the saw lists, and check the arbor: the 12 inch Luckyway and OEM blades and the 14 inch blades listed here use a 1 inch arbor, while the 12 inch DEWALT blade does not state one, and a 12 inch listing includes a conversion ring that lets the blade fit a 0.6 inch spindle.

What does tooth count mean on a chop saw blade?

Tooth count affects how smooth the cut comes out. A 32 tooth blade is listed for general purpose cuts, an 80 tooth blade for fine finish, and a 40 tooth blade for fine finish on a 10 inch saw. The listings tie higher tooth counts to finer finishes.

What is the difference between a chop saw blade and a cut-off wheel?

A toothed blade cuts with carbide teeth, while an abrasive cut-off wheel grinds through the metal. The listings show both: a 14 inch FOXBC blade with 72 teeth and a max RPM of 1800, and 14 inch abrasive wheels at 1/8 inch or 7/64 inch thick rated for 4,400 RPM. See the chop saw blade vs cut off wheel guide for a closer look.

How thick can a 14 inch chop saw blade cut?

It depends on the stock shape. The FOXBC 14 inch blade lists plates and bars from 1/4 inch to 1 inch thick, rods from 1/2 inch to 2 inch in diameter, and studs and tubing with a wall thickness from 1/8 inch to 1/2 inch. Check the listing for the stock you plan to cut.

Related: best chop saw for metal cutting, best chop saw blade for steel, best chop saw blade for aluminum, metal circular saw vs chop saw, and the metal fab tools hub. Also see band saw blade sizes.

More buying guides

Metal Fab Tools ·

How to Change a Chop Saw Blade

How to change a chop saw blade: unplug the saw, lock the spindle, swap the wheel for one that matches the diameter, arbor and…