How to Coil Band Saw Blade
A loose band saw blade coils into a tight ring with a twist of the wrists, and this guide shows the grip, the twist and the safe way to store it.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
FOXBC 32-7/8 Inch Bandsaw Blade 18 TPI for DeWalt9.6/10View on Amazon - 2
FOXBC 30-9/16 inch Bandsaw Blades 18 TPI9.6/10View on Amazon
A loose band saw blade wants to spring open in your hands, and the trick to how to coil band saw blade stock is a calm grip and a slow twist, not force. Hold the loop with the teeth pointing away from you, turn one hand toward you and the other away until the loop crosses over itself, then let it fold down into a tight coil you can tie off for storage. This guide walks through each move, the gear that makes it easier, and the safety checks that keep the teeth off your skin.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

FOXBC 32-7/8 Inch Bandsaw Blade 18 TPI for DeWalt
A 32-7/8 in, 18 TPI, 3-pack blade in Bi-Metal M42 High Speed Steel that lists a long fit list and a cut capacity of up to 5/32 in.
Pros
- 18 TPI hook teeth profile suits fine cuts in pipe, tubing and conduit
- Lists fit for DeWalt, Makita, Ryobi and Stout portable saws
- States a cut capacity of up to 5/32 in for material and wall thickness
- Bi-Metal M42 High Speed Steel with heat resistance, per the listing
Cons
- No warranty term is stated in the listing
- Sold as a 3-pack, with no other pack size listed

FOXBC 30-9/16 inch Bandsaw Blades 18 TPI
A 30-9/16 in, 18 TPI, 3-pack blade in Bi-Metal M42 High Speed Steel made for the Milwaukee portable band saw, with precision-sharpened hook teeth.
Pros
- 18 TPI hook teeth with precision-sharpened edges for fine, intricate cuts
- Bi-Metal M42 High Speed Steel with heat resistance, per the listing
- Made to fit the Milwaukee portable metal band saw
- 3-pack keeps a spare on hand when a blade dulls
Cons
- No warranty term is stated in the listing
- No cut capacity is stated for material thickness
- Sold as a 3-pack, with no other pack size listed
How to Coil Band Saw Blade
Work on a clear bench with room to move, and put on gloves and eye protection before you pick the blade up. The teeth stay sharp even when the blade is off the saw, and a loose coil can snap open without warning.
- Hold the loop out in front of you. Grip the top of the loop with one hand and the bottom with the other, teeth pointing away from your body and the loop hanging free of the bench edge.
- Twist your hands in opposite directions. Turn one hand toward you and the other hand away from you, slow and steady, until the loop crosses over itself and forms a crossed loop in the middle.
- Let the loop fold down. Keep your grip firm as the crossed loop folds down on itself; the blade gathers into a coil that sits flat in your hands. Do not let go until the coil is tied.
- Tie the coil off. Run a short length of wire or a strip of tape around the coil in a spot clear of the teeth, and cinch it snug so the coil cannot spring open in the drawer or on the shelf.
- Store it flat. Lay the tied coil flat with the teeth facing in, where it cannot roll off the bench or catch on a sleeve.
To uncoil a blade, hold the tied coil over the bench, cut the tie, and let the loop open away from your body while you keep a firm grip on the top. Never uncoil a blade toward your face, and unplug the saw before you take a blade off or put one on.
The Blades Side by Side
| Gear Score | Blade Length | Notes | |
|---|---|---|---|
| FOXBC 32-7/8 | 9.6/10 | 32-7/8 in, 18 TPI | Long fit list; states up to 5/32 in cut capacity |
| FOXBC 30-9/16 | 9.6/10 | 30-9/16 in, 18 TPI | Made for Milwaukee portable band saws |
The 2 blades here share the same build: 18 TPI, a 1/2 in width, a .020 in thickness, Bi-Metal M42 High Speed Steel and a 3-pack. What splits them is length and fit: the 32-7/8 in blade lists a long fit list and a cut capacity of up to 5/32 in, while the 30-9/16 in blade is the Milwaukee fit. Pick the length your saw takes, not the one that looks close.
Gear for the Job
The blade is the part that does the cutting, and its length is the measurement that has to match your saw, so pick by length first and by tooth count after. The 2 FOXBC blades here are the 2 lengths in this guide, and each card says what part of the job it handles.
Stay Safe Around a Loose Blade
A coiled blade stores a lot of spring energy, and the teeth can cut skin even when the blade is off the saw. Wear gloves and eye protection whenever you handle a loose blade, keep your hands clear of the teeth, and tie the coil before you set it down. Unplug the saw before you change a blade. When the saw runs, keep the guards in place and keep your hands and sleeves clear of the moving blade. OSHA rules cover guards and lockout on shop saws, so check the saw manual for the blade length it takes and the guard positions it calls for.
FAQ for welders
Can I coil a band saw blade by hand?
Yes. With gloves and eye protection on, hold the loop out in front of you, twist one hand toward you and the other away until the loop crosses over itself, then let it fold into a coil and tie it off. The move takes practice, so try it first with an old blade you plan to retire.
Why does my band saw blade spring open when I coil it?
The coil is under spring tension, so it opens the moment your grip slips or the tie comes loose. Keep a firm grip until the tie is snug, and tie the coil in a spot clear of the teeth so the wire or tape holds. A coil that keeps opening on its own usually has a loose tie, so tie it snug and check the tie before you set the coil down. If the blade itself is kinked, set it aside and check it for kinks before you use it again.
How do I store a coiled band saw blade?
Tie the coil so it cannot open, then lay it flat with the teeth facing in, in a dry spot where it cannot roll off the bench. Keep it away from other blades so the teeth do not nick each other, and mark the coil with its length so you grab the right one next time.
What size blade fits my portable band saw?
Check the saw manual for the length it takes, or measure around the outside edge of the old blade loop. The 2 blades in this guide are 30-9/16 in and 32-7/8 in, 1/2 in wide and .020 in thick, and our band saw blade sizes chart lists more lengths and widths. A blade that is too long will not seat on the wheels, and one that is too short will not reach.
What does 18 TPI mean on a band saw blade?
It means the blade has 18 teeth per inch, a fine pitch that suits thin wall pipe, tubing and conduit and leaves a smooth cut. A coarser pitch clears chips faster on thick stock but leaves a rougher edge. For the thin metal a portable band saw usually cuts, 18 TPI is a fine pitch that suits the work.
Related: best hand held band saw, best cordless band saw for job site, portable vs stationary band saw, and variable pitch vs constant pitch band saw blade. Also see the metal fab tools hub for more shop guides.




