Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Oscillating Multi Tool Blades Extra Long (2026): 5 Long-Reach Picks

Five extra long oscillating multi tool blades compared on stated reach, tooth type, pack size and fit, from titanium and bi-metal sets to a carbide pack for hard metal.

Best Oscillating Multi Tool Blades Extra Long (2026): 5 Long-Reach Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1AMZWEI Titanium 20-PackBest OverallAMZWEI Titanium 20-Pack9.6/10View on Amazon
  2. 2AMZWEI Bi-Metal 30-PackBest Value PackAMZWEI Bi-Metal 30-Pack9.6/10View on Amazon
  3. 3SEDY Carbide 3-PackBest for Hard MetalSEDY Carbide 3-Pack9.6/10View on Amazon
  4. 4EZARC 10-PackBest Mixed KitEZARC 10-Pack9.6/10View on Amazon

A flush cut under a door jamb or a plunge cut deep in a stud bay is where a standard blade runs out of reach. The best oscillating multi tool blades extra long give the tool room to work in tight spaces, with a curved edge and teeth matched to the material. This guide compares five long-reach sets on what each listing states: reach, tooth type, pack size and fit.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall AMZWEI Titanium 20-Pack: Titanium coated Japanese teeth, 2-3/4 inch reach, 20 pieces and a universal interface with 3 clip adapters. Check price on Amazon
  • Best Value Pack AMZWEI Bi-Metal 30-Pack: 30 pieces with a case, bi-metal teeth and 2-3/4 inch reach for wood with nails and soft metal. Check price on Amazon
  • Best for Hard Metal SEDY Carbide 3-Pack: TiCN carbide teeth on 50CrV steel for hardened steel, screws and bolts, with a maker claim of up to 60X longer life. Check price on Amazon
  • Best Mixed Kit EZARC 10-Pack: 5 CR-V Japanese teeth blades and 5 bi-metal blades in a 10 piece kit with 2-11/16 inch reach. Check price on Amazon

The machines

AMZWEI 20 Pcs Extra Long Titanium Oscillating Tool

AMZWEI 20 Pcs Extra Long Titanium Oscillating Tool

AMZWEI9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 piece set of titanium coated blades with Japanese teeth and a curved edge, stating 2-3/4 inches of reach.

Pros

  • States 2-3/4 inch (70 mm) extra long reach for plunge cuts in tight spaces
  • Titanium coated Japanese teeth, with a maker claim of 2x faster cutting
  • Universal interface with 3 clip adapters, claimed for more than 95% of tools
  • Curved edge design claimed to improve stability and accuracy

Cons

  • No warranty term in the listing
  • No blade thickness or width stated
  • Maker claims of 2x life and 2x cutting speed are stated without detail
  • Titanium coating is stated for the teeth, not the full blade
AMZWEI 30 Pcs Extra Long Bi-Metal Oscillating Tool

AMZWEI 30 Pcs Extra Long Bi-Metal Oscillating Tool

AMZWEI9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30 piece bi-metal set with a case, stating 2-3/4 inches of reach, a curved edge and length markings.

Pros

  • 30 pieces with a case, the largest pack here
  • 2-3/4 inch (70 mm) reach with length markings
  • Bi-metal teeth for wood with nails, soft metal and hard wood
  • Universal interface with 3 clip adapters, claimed for more than 95% of tools

Cons

  • Not suitable for bolts or screws, per the listing
  • No warranty term in the listing
  • No blade thickness or width stated
  • Longer life claim states no multiple
EZARC Oscillating Saw Blades

EZARC Oscillating Saw Blades

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 piece kit: 5 CR-V Japanese teeth blades for soft wood and plastic, and 5 bi-metal blades for soft metal, wood with nails and hard wood.

Pros

  • Two tooth types in this kit: 5 CR-V Japanese teeth and 5 bi-metal blades
  • States 2-11/16 inch extra long reach with a curved arc edge
  • Triple ground Japanese teeth claimed to leave a clean surface
  • Universal quick release interface for Fein, Ryobi, Milwaukee, Rockwell and Craftsman

Cons

  • Not recommended for Starlock interface systems
  • No warranty term in the listing
  • Only 5 blades of each tooth type
  • No case or storage stated in the listing
3-Pack TiCN Carbide Oscillating Saw Blades

3-Pack TiCN Carbide Oscillating Saw Blades

SEDY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 pack of TiCN carbide blades in 50CrV steel for hard metal, claiming up to 60X longer life than standard bi-metal blades.

Pros

  • Carbide teeth with a titanium coating on 50CrV steel, for hardened steel, screws and nails
  • Maker claims up to 60X longer life than standard bi-metal blades
  • Cuts bolts and trims copper pipes, per the listing
  • Two adapters for select Bosch and Dremel models

Cons

  • No reach or blade length stated
  • Only 3 blades in the pack
  • Not compatible with Starlock, StarlockPlus or StarlockMax systems
  • No warranty term in the listing
Trivd Frol 10 PCS Extra Long Multi Tool Blades

Trivd Frol 10 PCS Extra Long Multi Tool Blades

Trivd Frol9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 piece set of bi-metal and Japanese teeth blades with a curved edge, stating 2-11/16 inches of reach.

Pros

  • States 2-11/16 inches of extra long reach for plunge cuts in tight spaces
  • Bi-metal teeth for soft metal, wood with nails and hard wood
  • Curved edge design claimed to reduce vibration and improve stability
  • Universal quick release interface for Fein, Ryobi, Milwaukee, Rockwell and Craftsman

Cons

  • Reach stated as both 2-11/16 inches and 70 mm
  • Not recommended for Starlock interface systems of Bosch, Fein and Makita
  • No warranty term in the listing

Other welders and gear to compare

Best oscillating multi tool blades extra long: the picks side by side

Model Gear Score Reach Teeth Pack Fits Warranty
AMZWEI Titanium 20-Pack 9.6/10 2-3/4 in (70 mm) Titanium-coated Japanese teeth 20 pcs Universal, 3 clip adapters None stated
AMZWEI Bi-Metal 30-Pack 9.6/10 2-3/4 in (70 mm) Bi-metal 30 pcs with case Universal, 3 clip adapters None stated
EZARC 10-Pack 9.6/10 2-11/16 in CR-V Japanese teeth, bi-metal 10 pcs Universal quick release, not Starlock None stated
SEDY Carbide 3-Pack 9.6/10 Not stated TiCN carbide 3 pcs Quick release, not Starlock systems None stated
Trivd Frol 10-Pack 9.5/10 2-11/16 in (70 mm also stated) Bi-metal, Japanese teeth 10 pcs Universal quick release, not Starlock None stated

Specifications are manufacturer stated, as published on each listing and collected 11 November 2026.

Buying guide: what matters in extra long oscillating blades

Reach and plunge depth

Reach is the figure this keyword turns on. The two AMZWEI sets state 2-3/4 inches (70 mm) of reach, and the EZARC and Trivd Frol sets state 2-11/16 inches. The SEDY pack states no reach at all, so it cannot be compared on length. The Trivd Frol listing also writes 70 mm next to 2-11/16 inches, and those two figures do not agree, so the listing leaves its exact reach unclear.

Tooth type and material

Teeth decide what the blade cuts. Bi-metal teeth cover wood with nails, soft metal and hard wood on the AMZWEI 30 piece set, the EZARC bi-metal blades and the Trivd Frol set. Japanese teeth cut soft wood and plastic on the EZARC kit and come titanium coated on the AMZWEI 20 piece set. Carbide is the step up for hard metal: the SEDY pack states TiCN carbide teeth for hardened stainless steel, hardened screws and nails, and cutting bolts, and claims up to 60X longer life than standard bi-metal blades.

Curved edge and cut quality

The AMZWEI sets, the EZARC kit and the Trivd Frol set state a curved edge, claimed to improve stability and accuracy, cut vibration and leave a cleaner surface. The EZARC kit adds triple ground Japanese teeth for a clean finish on woodwork, and the SEDY pack states no curved edge.

Fit and interface

Every set here states a universal interface, but the fine print differs. The AMZWEI sets state 3 clip adapters and claim to fit more than 95% of oscillating tools, naming Dewalt, Bosch, Milwaukee and Ryobi. The EZARC, Trivd Frol and SEDY sets state they are not for Starlock systems, and the SEDY pack adds two adapters for select Bosch and Dremel models.

Pack size and value

Pack sizes here run from 3 pieces to 30 pieces. The AMZWEI 30 piece set includes a case, so it is the spare box for a long job, while the SEDY pack holds 3 carbide blades for occasional hard metal cuts. The EZARC kit splits its 10 pieces across two tooth types, so it suits a mixed job.

Use as directed. Wear eye protection and gloves, keep hands clear of the blade path, and unplug the tool or remove the battery before changing a blade. Let the blade stop before setting the tool down, and never force a blade into a cut it does not fit.

Before You Strike an Arc

  • Check the interface first: the AMZWEI sets state a universal interface with 3 clip adapters, while the EZARC, Trivd Frol and SEDY sets state they do not fit Starlock systems.
  • Match the teeth to the material: bi-metal for wood with nails and soft metal, Japanese teeth for clean wood and plastic, carbide for hardened steel, screws and bolts.
  • Check the stated reach against the cut: the AMZWEI sets state 2-3/4 inches, the EZARC and Trivd Frol sets state 2-11/16 inches, and the SEDY pack states no reach.

FAQ for welders

How long is an extra long oscillating blade?

The sets here state 2-3/4 inches or 2-11/16 inches of reach: the AMZWEI sets at 2-3/4 inches (70 mm), the EZARC and Trivd Frol sets at 2-11/16 inches. The SEDY pack states no reach, and the Trivd Frol listing also writes 70 mm next to 2-11/16 inches, so its exact reach is unclear.

Do these blades fit my oscillating tool?

All five sets state a universal interface, and the AMZWEI sets add 3 clip adapters and claim to fit more than 95% of oscillating tools. The EZARC, Trivd Frol and SEDY sets state they are not for Starlock systems, so check your tool’s interface first.

Which teeth cut wood with nails?

Bi-metal teeth: the AMZWEI 30 piece set, the EZARC bi-metal blades and the Trivd Frol set all name wood with nails, along with soft metal and hard wood. For hardened screws, nails and bolts, only the SEDY carbide pack names them, while the AMZWEI 30 piece set warns its blades are not suitable for bolts or screws.

What does a curved edge do?

The listings claim a curved edge improves stability and accuracy, reduces vibration and leaves a cleaner surface. The EZARC kit pairs its arc edge with triple ground Japanese teeth, and the SEDY carbide pack states no curved edge.

Can the same blade cut wood, metal and plastic?

The AMZWEI 20 piece set claims all three, plus plasterboard, with its titanium coated Japanese teeth. The EZARC kit splits the job instead: 5 CR-V Japanese teeth blades for soft wood and plastic, and 5 bi-metal blades for soft metal, wood with nails and hard wood.

Related: metal fab tools hub, oscillating tool vs angle grinder, and best extra long hacksaw blades.

Scoring, line by line

Each blade set is scored out of 10 on performance, build, value, safety listing and warranty. Oscillating blades carry no electrical safety listing, so every set here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
AMZWEI Titanium 20-Pack 9.6 30 21 21 n/a 0
AMZWEI Bi-Metal 30-Pack 9.6 29 20 22 n/a 0
EZARC 10-Pack 9.6 29 21 20 n/a 0
SEDY Carbide 3-Pack 9.6 30 21 18 n/a 0
Trivd Frol 10-Pack 9.5 27 19 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides