Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Bolt Cutters vs Hacksaw for Metal: Which One Should You Buy?

Bolt cutters pinch through small metal stock in one squeeze while a hacksaw saws to a line; how each cuts, when each wins, and four bolt cutters ranked by stated capacity.

Bolt Cutters vs Hacksaw for Metal: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Knipex Tools 71 01 250 CoBolt Compact Bolt CutterKnipex Tools 71 01 250 CoBolt Compact Bolt Cutter9.7/10View on Amazon
  2. 2HAUTMEC 12" Bi-Metal Hacksaw Blades SetHAUTMEC 12" Bi-Metal Hacksaw Blades Set9.7/10View on Amazon
  3. 314 Inch Bolt Cutter with Adjustable Jaw Gap CR-MO Jaws14 Inch Bolt Cutter with Adjustable Jaw Gap CR-MO JawsView on Amazon
  4. 418V ONE+™ BOLT CUTTER Brand: RYOBI18V ONE+™ BOLT CUTTER Brand: RYOBIView on Amazon
  5. 518 Inch Bolt Cutter18 Inch Bolt CutterView on Amazon
  6. 6RIDGID 14223 Model S24 Bolt CutterRIDGID 14223 Model S24 Bolt CutterView on Amazon
  7. 7RIDGID 14218 Model S18 Bolt CutterRIDGID 14218 Model S18 Bolt CutterView on Amazon

You need a piece of metal shorter, and the choice on the bench is a pair of bolt cutters or a hacksaw. Both cut metal, but they cut in completely different ways, and grabbing the wrong one wastes time or wrecks the piece. This guide covers bolt cutters vs hacksaw for metal: how each tool cuts, when each one wins, and which of four bolt cutters the listings back up with stated cutting specs.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one cut

Bolt cutters work like a giant pair of scissors for metal. Two hardened jaws close on the work and pinch through it in one squeeze, which is fast but leaves a crushed edge. A hacksaw drags a toothed blade across the metal and removes a thin kerf of material with every stroke, which is slow but leaves a flatter edge you can cut right to a marked line. That one difference, pinching versus sawing, decides the speed and the finish; how hard the steel can be comes down to the jaw or blade rating.

Side by side

Bolt cutters Hacksaw Winner
How it cuts Jaws pinch through the metal Teeth saw through on the stroke Tie
Cut quality Pinched edge, often needs a file Flatter edge, cut to a line Hacksaw
Speed on small stock One squeeze and done Dozens of strokes Bolt cutters
Speed on thick stock Struggles past its stated capacity Slow but steady through the frame depth Hacksaw
Hard material Needs jaws harder than the work Needs the right blade for the hardness Hacksaw
One hand work Yes, with a compact cutter No, one hand saws and one holds Bolt cutters
Reach Jaw depth limits it Frame depth limits it Tie
Noise and mess A snap, small chips fly Quiet, fine metal dust Tie
Best for Quick cuts on wire, rod, chain and bolts Straight, accurate cuts to a line Tie

Bolt cutter capacities are per the listing of each tool; always match the stated cutting capacity to the hardness of your work, and never force a cutter past its stated capacity.

When bolt cutters are the better choice

  • Quick cuts on small stock. Wire, rod, chain links, nails and small bolts go in one squeeze, which beats dozens of saw strokes.
  • Work you cannot clamp. A compact cutter works one handed while the other hand holds the piece, handy on a fence line or under a trailer.
  • Demolition and disassembly. Cutting out old fasteners, chain and wire where the edge finish does not matter.
  • No power and no setup. Nothing to plug in, no blade to mount, nothing to adjust before the first cut.

Our best bolt cutters roundup covers full size cutters for heavier work.

When a hacksaw is the better choice

  • A straight cut to a line. The blade follows a marked line, so the cut lands where you want it for fit up.
  • Thick stock past cutter capacity. A saw keeps going through stock the frame depth spans, provided the blade suits the metal, slowly but surely.
  • Harder steel. With the right blade, a hacksaw handles hardness that would chip cutter jaws.
  • Cleaner edges. Less crushing means less filing before the part goes into the project.

Pair the saw with the right teeth: our best hacksaw for cutting steel and best hacksaw blades guides cover frames and blades.

Bolt cutters vs hacksaw for metal: four bolt cutters, ranked

The listings below are ranked by what they state: cutting capacity, jaw hardness and warranty. First is the KNIPEX CoBolt S (71 01 160), a 6 inch compact cutter in chrome vanadium steel with induction hardened edges at approx. 64 HRC. The listing states it cuts bolts, nails and rivets up to 13/64 inch (5.3 mm), has a gripping surface for wire from 3/64 inch, weighs 7.04 ounces and carries a Lifetime Limited warranty, which is the strongest paper of the four.

Second is the WORKPRO 8 inch mini bolt cutter in drop forged Cr-V steel with jaw hardness of HRC 60-62. It states a maximum cutting capacity of 6 mm (15/64 inch) for materials with HRC up to 20, and 4 mm (4/25 inch) for materials with HRC up to 40, at 11.6 ounces and 8.46 x 2.36 x 0.98 inches. The listing says it is not recommended for cutting locks.

Third is the KSEIBI 12 inch heavy duty mini bolt cutter, 12 inches (300 mm) with a stated cutting range up to 5/8 inch (16 mm) in diameter, an anti rust black coating and a soft grip rubber handle at 0.81 kg. The listing notes it is not ideal for cutting locks or large bolts, so it suits light duty work where reach matters.

Fourth is the SHALL 3 piece set: a 14 inch bolt cutter with a 19/32 inch (15 mm) max jaw opening, an 8 inch mini bolt cutter with a 1/4 inch (7 mm) jaw opening and an 8 inch wire rope cutter with a 7/16 inch (10 mm) jaw opening, in a 600D fabric carrying case. It is the most versatile kit here, but the listings state jaw openings rather than material capacities, so it ranks below the cutters with stated capacities.

Cutting safety. Wear eye protection, because cut ends and chips fly, and wear gloves when handling fresh cut steel. Clamp the work when you can, keep fingers clear of the jaws, and keep the cut zone clear of anything flammable.

FAQ for welders

Can bolt cutters cut hardened steel?

Only within the stated capacity. The WORKPRO listing rates 6 mm for material up to HRC 20 and 4 mm for material up to HRC 40, and the KNIPEX edges are induction hardened to approx. 64 HRC. Check the hardness of your work against the listing before you squeeze, because jaws used past their stated capacity can chip.

Will bolt cutters leave a clean edge?

No. The jaws pinch the metal apart, so the edge comes out crushed and often needs a file or grinder before fit up. If the edge has to land on a line or go straight into a project, a hacksaw leaves a flatter cut. Choose the cutter for speed and the saw for finish.

What size bolt cutter do I need?

Match the tool to the stock. The listings state the 6 inch KNIPEX cuts to 13/64 inch, the 8 inch WORKPRO to 6 mm, the 12 inch KSEIBI to 5/8 inch, and the 14 inch SHALL jaw opens to 19/32 inch. Longer handles give more leverage, so size up when the cut feels like a strain.

Can a mini bolt cutter cut a padlock?

Do not count on it. The KSEIBI listing says its 12 inch cutter is not ideal for cutting locks, and the WORKPRO listing says its 8 inch cutter is not recommended for cutting locks. Locks and heavy chain need a full size cutter rated for the job.

Bolt cutters or an angle grinder for cutting rebar?

For a few quick cuts, bolt cutters are faster and need no power. For a pile of rebar or thick bar, a grinder with a cutoff wheel wins on speed and capacity. See our hacksaw vs angle grinder for metal guide for how the saw based options compare.

Related: best bolt cutters, hacksaw vs angle grinder for metal, best hacksaw for cutting steel, and jigsaw vs reciprocating saw for metal.

More buying guides

Metal Fab Tools ·

Best Bolt Cutter for Wire Shelving (2026)

Five bolt cutters for trimming wire shelving, compared on length, blade hardness, cutting capacity and grip, and scored from what each listing states.

Metal Fab Tools ·

Bolt Cutter Sizes and Which to Buy

Bolt cutter sizes run from a compact 8-inch cutter for light stock to a 24-inch cutter for thick bolts, and the right size is…