Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Bolt Cutter Parts: Jaws, Handles, Pivots and More

Bolt cutter parts explained: jaws, handles, pivots and the adjustment bolt, with stated cutting capacities and jaw openings from three cutters.

Bolt Cutter Parts: Jaws, Handles, Pivots and More
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WORKPRO 30" Bolt Cutter, Chrome Molybdenum SteelWORKPRO 30" Bolt Cutter, Chrome Molybdenum Steel9.7/10View on Amazon
  2. 2MAXPOWER 30" Heavy Duty Bolt Cutter, Cr-Mo JawMAXPOWER 30" Heavy Duty Bolt Cutter, Cr-Mo Jaw9.6/10View on Amazon
  3. 3WORKPRO Bolt Cutter for Cutting Pad Locks RivetsWORKPRO Bolt Cutter for Cutting Pad Locks Rivets9.6/10View on Amazon

A bolt cutter has a small set of parts that do the work: jaws that meet, handles that lever them shut, a pivot that carries the force, and an adjustment bolt that keeps the blades aligned on cutters that state one. Bolt cutter parts are the jaws, the handles and the pivot, with an adjustment bolt on cutters that state one, and knowing which part does what tells you which part to check when a cut goes wrong. This guide names each part, shows what it does on the cutters in this article and shows how to check the fit before you cut.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

WORKPRO 30" Bolt Cutter, Chrome Molybdenum Steel

WORKPRO 30" Bolt Cutter, Chrome Molybdenum Steel

WORKPRO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-inch bolt cutter with drop forged chrome molybdenum jaws, a 25/64-inch cutting capacity for metals with HRC 42 or less and TPR ergonomic handles.

Pros

  • Drop forged Cr-Mo jaws, powder coated for corrosion and rust resistance, as stated
  • 25/64 in (10 mm) cutting capacity for metals with HRC 42 or less, and 15/32 in (12 mm) for metals with HRC under 25
  • Maximum opening of 12 mm, as stated
  • TPR ergonomic handles with anti-slip soft grips

Cons

  • No warranty term is stated
  • 30-inch length needs more storage space than the 24-inch WORKPRO
  • No weight is stated, while the MAXPOWER states 7.94 lb
  • No adjustment bolt is stated, while the MAXPOWER states an adjustment bolt
MAXPOWER 30" Heavy Duty Bolt Cutter, Cr-Mo Jaw

MAXPOWER 30" Heavy Duty Bolt Cutter, Cr-Mo Jaw

MAXPOWER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-inch bolt cutter with drop forged Cr-Mo jaws, a 13/16-inch maximum jaw opening and an adjustment bolt for blade alignment.

Pros

  • 13/16 in maximum jaw opening is stated
  • Adjustment bolt for precise blade alignment is stated
  • Cuts 3/8 in (10 mm) for hardened steel, as stated
  • 7.94 lb stated weight, the only stated weight in this group

Cons

  • No warranty term is stated
  • 30-inch overall length with a 24-inch working handle needs storage space
  • No cutting capacity for softer metals is stated, while the WORKPRO 30-inch states capacities for two hardness levels
  • No powder coating is stated, while both WORKPRO cutters state powder coated jaws
WORKPRO Bolt Cutter for Cutting Pad Locks Rivets

WORKPRO Bolt Cutter for Cutting Pad Locks Rivets

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24-inch bolt cutter with drop forged chrome vanadium steel blades, bi-material anti-slip grips and stated cutting capacities for two hardness levels.

Pros

  • Cutting capacity is stated for two hardness levels: 3/8 in (11 mm) at HRC 19 or less and 5/16 in (8 mm) at HRC under 48
  • Drop forged chrome vanadium steel with powder coated jaws, as stated
  • Bi-material anti-slip grips for control and comfort, as stated
  • 24-inch length is the shortest stated length in this group

Cons

  • No weight is stated, while the MAXPOWER states 7.94 lb
  • No adjustment bolt is stated, while the MAXPOWER states an adjustment bolt
  • No maximum jaw opening is stated, while the WORKPRO 30-inch states 12 mm and the MAXPOWER states 13/16 in
  • Cutting capacity at HRC under 48 is 5/16 in (8 mm), the smallest stated capacity in this group

Bolt cutter parts in one paragraph

The jaws are the cutting edge, forged from steel and shaped to meet in the middle. The handles are the levers, long enough to multiply the force from your hands. The pivot joins the handles to the jaws and carries that force through the cut. The adjustment bolt, where a cutter states one, sets the blades so they meet evenly. When a cutter will not cut cleanly, check those parts first: dull or misaligned jaws, a loose pivot or blades that no longer meet.

The parts side by side

Part WORKPRO 30 in WORKPRO 24 in MAXPOWER 30 in
Jaws Drop forged Cr-Mo, powder coated Drop forged chrome vanadium, powder coated Drop forged Cr-Mo, heat treated
Cutting capacity 25/64 in (10 mm) at HRC 42 or less; 15/32 in (12 mm) at HRC under 25 3/8 in (11 mm) at HRC 19 or less; 5/16 in (8 mm) at HRC under 48 3/8 in (10 mm) for hardened steel
Jaw opening 12 mm maximum opening Not stated 13/16 in maximum jaw opening
Handles TPR ergonomic, anti-slip soft grips Bi-material anti-slip grips Non-slip rubber handles, ergonomic grips
Adjustment No adjustment bolt stated No adjustment bolt stated Adjustment bolt for blade alignment

The three cutters in this article state the same parts in different words, so the table above lines them up by part. Jaws and handles are stated on every cutter here, while an adjustment bolt is stated only on the MAXPOWER.

Jaws and blades

Jaws are the part that meets the metal, and the listings state what they are forged from. The WORKPRO 30-inch cutter states drop forged chrome molybdenum jaws, powder coated for corrosion and rust resistance, with heat treatment and quenching. The WORKPRO 24-inch cutter states drop forged chrome vanadium steel and powder coated jaws. The MAXPOWER states drop forged Cr-Mo blades, heat treated for hardness, beveled on both sides and equidistant for a center cut. Each cutting capacity here is stated with a hardness condition: the WORKPRO 30-inch states 25/64 in (10 mm) for metals with HRC 42 or less and 15/32 in (12 mm) for metals with HRC under 25, the WORKPRO 24-inch states 3/8 in (11 mm) at HRC 19 or less and 5/16 in (8 mm) at HRC under 48, and the MAXPOWER states 3/8 in (10 mm) for hardened steel. Jaw opening is stated on two cutters: 12 mm maximum opening on the WORKPRO 30-inch and 13/16 in maximum jaw opening on the MAXPOWER.

Handles, pivots and the adjustment bolt

Handles are the levers, and the listings state the grip material on each cutter. The WORKPRO 30-inch states TPR ergonomic handles with anti-slip soft grips, the WORKPRO 24-inch states bi-material anti-slip grips, and the MAXPOWER states non-slip rubber handles with ergonomic grips. The MAXPOWER states a 30-inch overall length with a 24-inch working handle. Pivots are the joints that carry the force. The WORKPRO 30-inch states a classic lever-fulcrum design with hinges, and the WORKPRO 24-inch states the same classic lever-fulcrum design with precisely aligned blades. The adjustment bolt is stated only on the MAXPOWER, where a built-in adjustment bolt provides precise blade alignment. Where a cutter states no adjustment bolt, the listing gives no way to adjust blade alignment, so a cutter whose blades no longer meet has no stated way to bring them back.

How to check the fit before you cut

Check the stated cutting capacity against the metal in front of you, including the hardness condition the listing states. A capacity stated for softer metal does not carry over to harder metal, so read the hardness condition beside the size figure. Check the jaw opening against the piece: the WORKPRO 30-inch states a 12 mm maximum opening and the MAXPOWER states a 13/16 in maximum jaw opening, and a piece wider than the stated opening will not sit in the jaws. Check the handles for a grip that suits your hands, and check that the blades meet evenly along their length. On the MAXPOWER, use the stated adjustment bolt to set the blade alignment. See the bolt cutter sizes guide for how length relates to the cut, and the bolt cutters vs rebar cutter guide for when a different tool fits the job.

The cutters in this guide

The jaws, handles and pivots above are the parts to check, with the adjustment bolt where a cutter states one, and the cutters below show how those parts are stated on real listings.

FAQ for welders

What part of a bolt cutter does the cutting?

The jaws do the cutting. All three cutters in this article state drop forged jaws: chrome molybdenum on the WORKPRO 30-inch and the MAXPOWER, and chrome vanadium steel on the WORKPRO 24-inch. The MAXPOWER blades are beveled on both sides for a center cut.

What does the adjustment bolt do?

The adjustment bolt sets the blades so they meet evenly. The MAXPOWER states a built-in adjustment bolt for precise blade alignment, and it is the only cutter in this article that states one. The WORKPRO cutters state a lever-fulcrum design with precisely aligned blades, and neither states an adjustment bolt.

How do I know what size bolt a cutter will cut?

Read the stated cutting capacity with its hardness condition. The WORKPRO 30-inch states 25/64 in (10 mm) for metals with HRC 42 or less and 15/32 in (12 mm) for metals with HRC under 25. The WORKPRO 24-inch states 3/8 in (11 mm) at HRC 19 or less and 5/16 in (8 mm) at HRC under 48, and the MAXPOWER states 3/8 in (10 mm) for hardened steel.

Do bolt cutter jaws wear out?

The listings state drop forged jaws with heat treatment on the WORKPRO 30-inch and the MAXPOWER, and powder coated jaws on both WORKPRO cutters. Check the blades for nicks and check the alignment with the adjustment bolt where the cutter states one. A cutter whose blades no longer meet evenly will not cut cleanly, even if the jaws still look sound.

Can I replace just the jaws on a bolt cutter?

None of the three listings in this article states replacement jaws, so check the maker’s manual for the cutter you own. The three cutters here are sold as complete cutters, with jaws, handles and pivots in one unit.

Related: best bolt cutters, bolt cutter sizes, best bolt cutters for rebar, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Best Bolt Cutter for Wire Shelving (2026)

Five bolt cutters for trimming wire shelving, compared on length, blade hardness, cutting capacity and grip, and scored from what each listing states.

Metal Fab Tools ·

Bolt Cutter Sizes and Which to Buy

Bolt cutter sizes run from a compact 8-inch cutter for light stock to a 24-inch cutter for thick bolts, and the right size is…

Metal Fab Tools ·

Best Bolt Cutters (2026)

Five bolt cutters from 10 to 30 inches compared by length, stated cutting capacity, blade steel and hardness, handles and warranty, scored for the…