Bolt Cutter Sizes and Which to Buy
Bolt cutter sizes run from a compact 8-inch cutter for light stock to a 24-inch cutter for thick bolts, and the right size is the one whose rated capacity covers the stock you cut.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Klein Tools 63314 Heavy-Duty Bolt Cutter9.7/10View on Amazon - 2
WORKPRO W017006A Bolt Cutter9.6/10View on Amazon - 3
WORKPRO W017004A Bolt Cutter9.6/10View on Amazon - 4
KNIPEX - 71 01 200 Tools9.4/10View on Amazon
A bolt that is thicker than the cutter is a wasted trip, and a cutter far bigger than the job is dead weight in the hand. Bolt cutter sizes match the stock they cut, but length alone does not decide it: the right size is the one whose rated capacity covers the stock at hand. This guide shows how the sizes compare, how to read the capacity ratings, and which cutter here fits each kind of work.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | Klein Tools 63314 Heavy-Duty Bolt Cutter | 9.7/10 | Buy on Amazon |
| 2 | WORKPRO W017006A Bolt Cutter | 9.6/10 | Buy on Amazon |
| 3 | WORKPRO W017004A Bolt Cutter | 9.6/10 | Buy on Amazon |
| 4 | KNIPEX - 71 01 200 Tools | 9.4/10 | Buy on Amazon |

Klein Tools 63314 Heavy-Duty Bolt Cutter
A 14-inch cutter with center-cut jaws for soft, medium and hard metals, rated at 5/16 inch for soft and medium stock and 3/16 inch for hard stock.
Pros
- 5/16-inch capacity for soft and medium metals, 3/16-inch for hard metals
- Forged alloy tool steel jaws, precision ground for clean cuts
- Center-cut jaws handle soft, medium and hard metals
- Heavy vinyl grips with flat grip ends for 90-degree cuts
Cons
- 14-inch handles give less leverage than the 24-inch cutter here
- Hard-material capacity drops to 3/16 inch
- Center-cut jaws do not cut flush against a surface
- 1-year manufacturer warranty is short for a shop tool

WORKPRO W017006A Bolt Cutter
A 24-inch cutter with drop forged chrome molybdenum steel jaws, rated to cut 5/16 inch at HRC 42 or less and 25/64 inch below HRC 25, built for soft metal, bolts, rods, rivets and chain.
Pros
- Largest capacity here: 5/16 inch at HRC 42 or less, 25/64 inch below HRC 25
- 24-inch handles give the most leverage of the four cutters
- Drop forged chrome molybdenum steel jaws with a powder coated finish
- Bi-material anti-slip grips for control in cutting
Cons
- 5.7 pounds, the heaviest cutter here
- 24-inch length is awkward in tight spaces
- No warranty term is stated
- Long handles need two hands and room to swing

WORKPRO W017004A Bolt Cutter
A 14-inch cutter with drop forged chrome molybdenum steel jaws, rated to cut 7/32 inch at HRC 42 or less and 1/4 inch below HRC 25, with bi-material anti-slip grips.
Pros
- 14-inch length fits a toolbox and tight spots
- Drop forged chrome molybdenum steel jaws with a powder coated finish
- Bi-material anti-slip grips for control in cutting
- Classic lever-fulcrum design with precisely aligned blades
Cons
- Smallest capacity here: 7/32 inch at HRC 42 or less
- No warranty term is stated
- Shorter handles need more hand force than the 24-inch cutter
- Not recommended for cutting locks

KNIPEX - 71 01 200 Tools
An 8-inch compact bolt cutter at 0.65 pounds, built for light cutting in the shop, at home or in the service field.
Pros
- 8-inch length and 0.65 pounds, the lowest-weight and most compact cutter here
- Small enough to carry in a tool bag to the job
- Precision grade design aimed at trade use
- Comfortable in use with a quality assured design
Cons
- 8-inch handles give the least leverage of the four cutters
- Short jaws suit light stock, not thick bolts
- Aimed at shop, home and service work, not heavy demolition
- Only the 8-inch size is offered here, so thicker stock needs a longer cutter
Bolt cutter sizes and what each one cuts
The cutters here run from a compact 8-inch cutter to a long 24-inch cutter, with two 14-inch cutters in between. Length sets the leverage, and the maker’s rated capacity sets what the jaws can cut. The 24-inch WORKPRO is rated to cut 5/16 inch at HRC 42 or less and 25/64 inch below HRC 25, while the 14-inch WORKPRO is rated at 7/32 inch at HRC 42 or less and 1/4 inch below HRC 25. The Klein cutter takes a different path: it is rated at 5/16 inch for soft and medium materials up to Brinell 300 and Rockwell C31, and 3/16 inch for hard materials up to Brinell 400 and Rockwell C42. The 8-inch KNIPEX is the compact cutter of the four, built for light work in the shop, at home or in the service field.
Side by side
| Pick | Length | Cutting capacity | Jaws | Weight |
|---|---|---|---|---|
| Klein Tools 14-Inch | 14 in | 5/16 in soft and medium, 3/16 in hard | Forged alloy tool steel | Not stated |
| WORKPRO 24-Inch | 24 in | 5/16 in at HRC 42 or less, 25/64 in below HRC 25 | Chrome molybdenum steel | 5.7 lb |
| WORKPRO 14-Inch | 14 in | 7/32 in at HRC 42 or less, 1/4 in below HRC 25 | Chrome molybdenum steel | Not stated |
| KNIPEX CoBolt 8-Inch | 8 in | Not stated | Not stated | 0.65 lb |
Length and capacity do not move in lockstep here: the 14-inch Klein matches the 24-inch WORKPRO’s 5/16-inch rating in soft and medium stock, and the 24-inch cutter takes the thickest stock only in softer stock, at 25/64 inch below HRC 25. Check the hardness rating beside the size, since a cutter rated for soft stock may not cut the same thickness in hard stock.
When a short bolt cutter is the better choice
- Tight spaces. An 8-inch or 14-inch cutter fits where a 24-inch cutter cannot swing.
- Carry to the job. The 8-inch KNIPEX at 0.65 pounds rides in a tool bag, and a 14-inch cutter fits a toolbox.
- Light stock. Thin rod, small chain and light bolts are work a short cutter handles well; a long cutter cuts them too, but it is more tool than the job needs.
- Small jobs. Cutting a few light bolts or a short length of chain does not need the leverage of a long cutter.
Our best bolt cutters under 30 roundup covers cutters for this kind of light work.
When a long bolt cutter is the better choice
- Thick bolts. The 24-inch WORKPRO cuts 5/16 inch at HRC 42 or less and 25/64 inch below HRC 25.
- Leverage. Long handles multiply hand force, so thick stock cuts with less effort.
- Chain and rod. The 24-inch WORKPRO is listed for soft metal, bolts, rods, rivets and chain.
- Reach. Long handles reach bolts set deep in a frame or fence.
See bolt cutters vs rebar cutter when the stock is rebar rather than bolts.
How to match the cutter to the stock
Read the rating before the size. A cutter rated for a thickness in soft stock may only cut a smaller thickness in hard stock, so match both numbers to the stock in hand.
- Read the hardness first. The Klein cutter cuts 5/16 inch in soft and medium stock but only 3/16 inch in hard stock, and the WORKPRO cutters state separate limits for HRC 42 or less and below HRC 25.
- Match the rating to the stock. The WORKPRO cutters state their limits by HRC: 7/32 inch for the 14-inch cutter and 5/16 inch for the 24-inch cutter at HRC 42 or less.
- Mind the lock warning. The 14-inch WORKPRO listing states that cutting locks is not recommended, so use a cutter rated for the lock or a different tool.
- Mind the weight. The 24-inch WORKPRO weighs 5.7 pounds, so it suits bench and ground work more than carrying to every job.
- Check the grip. Bi-material anti-slip grips on the WORKPRO cutters and heavy vinyl grips on the Klein cutter keep the handles steady in the hand.
Cut with care. Keep hands clear of the jaws, wear eye protection, and check that the stock is held steady before cutting.
The gear for bolt cutter sizes
Size is the measurement that decides the cut, and the four cutters here cover the range from a compact 8-inch cutter to a long 24-inch cutter.
For more options, see our metal fab tools guides.
FAQ for welders
What size bolt cutter do I need?
Match the cutter to the thickest stock you cut. The two 14-inch cutters differ: the WORKPRO 14-inch covers light bolts and rod at 7/32 inch at HRC 42 or less, while the Klein 14-inch cuts 5/16 inch in soft and medium stock. The 24-inch cutter covers the thickest stock here, and the rated capacity for the stock’s hardness is the figure to check before buying.
What does HRC mean on a bolt cutter rating?
HRC is the Rockwell hardness scale, and the WORKPRO cutters state their limits by it: the 14-inch cutter is rated at 7/32 inch at HRC 42 or less and 1/4 inch below HRC 25. Harder stock needs a smaller cut or a longer cutter.
Can a bolt cutter cut a lock?
The 14-inch WORKPRO listing states that cutting locks is not recommended. Locks are often harder than the stock a general cutter is rated for, so use a cutter rated for the lock’s hardness or a different tool.
Why does the same cutter cut less in hard stock?
Capacity falls as hardness rises. The Klein cutter cuts 5/16 inch in soft and medium stock but only 3/16 inch in hard stock, and the WORKPRO cutters state separate limits for HRC 42 or less and below HRC 25.
Is a longer bolt cutter always better?
No. A 24-inch cutter gives more leverage and cuts thicker stock, but at 5.7 pounds it is heavy to carry and awkward in tight spaces. Pick the smallest cutter whose rated capacity covers the stock you cut.
Related: best bolt cutters under 30, bolt cutters vs rebar cutter, and bolt cutters vs hacksaw for metal.




