Bolt Cutters vs Rebar Cutter: Which One Should You Buy?
Two bolt cutters and two rebar cutters compared on cut capacity, power, cut speed and box contents, from a four-piece manual set to electric hydraulic machines.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CENTALL Electric Hydraulic Rebar Cutter RC16B9.5/10View on Amazon - 2
VIHKUIV 4-Piece Bolt Cutter Set9.5/10View on Amazon - 3
VEVOR Electric Rebar Cutter9.5/10View on Amazon - 4
RYOBI ONEAND 18V Cordless Bolt Cutters Tool ONLY9.2/10View on Amazon
This guide covers bolt cutters vs rebar cutter. Verdict. Pick a rebar cutter if the job is cutting rebar to length: the CENTALL and VEVOR examples both state 3/20 in to 5/8 in rebar on 110V power, cutting in seconds. Pick bolt cutters if the job mixes bolts, chains and cable: the VIHKUIV set covers several cutter types in one kit, and the RYOBI example is cordless. Neither side wins every job; the listings separate them by power source and stated cut range.
A job that needs rebar cut to length and a job that needs a padlock cut off ask for different tools, and bolt cutters vs rebar cutter is the choice between a cutter for mixed materials and a machine built for rebar alone. This comparison puts two bolt cutter listings against two rebar cutter listings on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four tools

CENTALL Electric Hydraulic Rebar Cutter RC16B
An electric hydraulic rebar cutter for 4mm to 16mm rebar, with one-button operation.
Pros
- Cuts 3/20 in to 5/8 in rebar in 1-1.5s
- 1000W copper coil motor on 110V power
- Cr12MoV blades with multiple screw fixed heads
- No excess sparks and dust in the cutting process
Cons
- No carrying case is stated in the listing
- Corded: needs 110V power on site
- Rebar only: no bolt, chain or cable cutting stated
- No warranty term is stated

VIHKUIV 4-Piece Bolt Cutter Set
A four-piece manual cutter set covering bolts, cable and wire rope, plus work gloves.
Pros
- Four cutters in one kit, plus gloves
- 14 in cutter handles bolts up to 1/4 in
- Heat-treated chrome vanadium steel jaws
- Non-slip handles for grip and control
Cons
- Manual cutting: no powered speed stated
- 8 in mini cutter limited to 1/8 in
- No rebar size is stated
- No warranty term is stated

VEVOR Electric Rebar Cutter
An electric hydraulic rebar cutter for 4mm to 16mm rebar, with a metal carrying case.
Pros
- Cuts 3/20 in to 5/8 in rebar in 2.5-3.0 seconds
- 900W copper coil motor on 110V power
- Adjustable bolt for repeated accurate cuts
- Metal carrying case included
Cons
- Slower per cut than the CENTALL listing states
- Corded: needs 110V power on site
- Rebar only: no bolt, chain or cable cutting stated
- No warranty term is stated

RYOBI ONEAND 18V Cordless Bolt Cutters Tool ONLY
A cordless 18V bolt cutter sold as tool only, with no cut capacity stated.
Pros
- Cordless 18V operation for sites without power
- Tool-only format for buyers with a battery and charger
- Compact listed size for carrying on site
- No cord to manage on site
Cons
- No cut capacity is stated anywhere in the listing
- Battery and charger sold separately
- Listing bullets describe unrelated replacement parts
Other welders and gear to compare
WORKPRO W017004A Bolt CutterCheck price on Amazon
Crescent 18" High Leverage Compound Bolt CutterCheck price on Amazon
CENTALL Electric Hydraulic Rebar Cutter RC20B 1050w/17T/#6/2sCheck price on Amazon
RIDGID 14223 Model S24 Bolt CutterCheck price on Amazon
KNIPEX 71 72 610 Large Bolt CuttersCheck price on Amazon
STEELMAN Folding Bolt Cutter with Ergonomic HandlesCheck price on Amazon
Bolt cutters vs rebar cutter side by side
| CENTALL RC16B | VIHKUIV 4-Piece Set | VEVOR 900W RC-16 | RYOBI P592 | |
|---|---|---|---|---|
| Gear Score | 60 | 59 | 58 | 36 |
| Power | 1000W, 110V | Manual | 900W, 110V | 18V cordless |
| Cut capacity | 3/20 in to 5/8 in rebar | Up to 1/4 in bolts | 3/20 in to 5/8 in rebar | Not stated |
| Cut speed | 1-1.5s | Manual | 2.5-3.0 seconds | Not stated |
| In the box | Not stated | 4 cutters plus gloves | Metal carrying case | Tool only |
| Warranty | Not stated | Not stated | Not stated | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 3 November 2026. No listing on either side states a warranty term or a safety certification.
Power and cut capacity
The rebar side is corded. The CENTALL example runs a 1000W motor on 110V, and the VEVOR example runs a 900W motor on 110V, and both state the same cut range: 3/20 in to 5/8 in rebar. The bolt cutter side is manual or cordless. The VIHKUIV set is manual, with the 14 in cutter rated for bolts up to 1/4 in and the 8 in mini cutter rated up to 1/8 in. The RYOBI example is an 18V cordless tool, but its listing states no cut capacity at all. For rebar at 5/8 in, only the rebar listings state that capacity.
Cut speed and operation
The CENTALL listing states a cutting speed of 1-1.5s, and the VEVOR listing states 2.5-3.0 seconds, both with one-button operation. The VIHKUIV set is manual leverage, so no time is stated, and the RYOBI listing states no cut speed either. For many repeated rebar cuts, only the powered listings state a per-cut time.
What is in the box
The VIHKUIV set gives the most in one purchase: a 14 in bolt cutter, an 8 in mini bolt cutter, an 8 in cable cutter, an 8 in wire rope cutter, and work gloves. The VEVOR example includes a metal carrying case, the CENTALL listing names no case or extras, and the RYOBI example is tool only, with battery and charger sold separately.
Choose bolt cutters if
- Your work mixes bolts, chains, cables and wire rope, as the VIHKUIV listing describes.
- You work away from an outlet and want cordless operation, as the RYOBI example offers.
- You need a compact cutter for tight spaces, as the 8 in mini cutter in the set offers.
- You want several cutter types in one kit rather than one powered machine.
Choose a rebar cutter if
- You cut rebar to length repeatedly on a job site.
- Your rebar runs from 4mm to 16mm, the range both rebar listings state.
- You want seconds-per-cut speed with one-button operation.
- You have 110V power on site for a corded machine.
FAQ for welders
Can bolt cutters cut rebar?
The VIHKUIV listing names bolts, rods, chains and cables, but states no rebar size. For rebar work, the rebar listings state 3/20 in to 5/8 in rebar directly.
What size rebar can these rebar cutters cut?
Both rebar listings state the same range: 3/20 in (4mm) to 5/8 in (16mm). The VEVOR listing names that range #3 to #5 rebar.
Do the rebar cutters need an outlet?
Yes. Both state 110V power, and the CENTALL listing adds 60HZ. Neither is cordless, so plan for a power source on site.
Does the RYOBI cutter come with a battery?
No. The title states tool only, with battery and charger sold separately. A buyer without an 18V battery needs one before the tool cuts anything.
What does the VIHKUIV set include?
The listing names a 14 in bolt cutter, an 8 in mini bolt cutter, an 8 in cable cutter, and an 8 in wire rope cutter, plus work gloves.
Related: best bolt cutters for rebar, bolt cutters vs hacksaw for metal, best bolt cutter and pliers set, and the metal fab tools hub.
Scoring, line by line
All four tools are scored on performance, build, value, safety listing and warranty. No listing states a safety certification or a warranty term, so safety and warranty score zero and the ranking turns on stated capacity, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CENTALL RC16B | 9.5 | 32 | 21 | 20 | 0 | 0 |
| VIHKUIV 4-Piece Set | 9.5 | 28 | 21 | 22 | 0 | 0 |
| VEVOR 900W RC-16 | 9.5 | 29 | 21 | 20 | 0 | 0 |
| RYOBI P592 | 9.2 | 16 | 15 | 12 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.
Before you strike an arc. Wear eye protection and gloves, keep hands clear of the jaws, and clear the area before cutting. Unplug a corded cutter before adjusting the bolt or changing a blade.




