Best Electric Rebar Cutter (2026): 3 Picks Compared
Three electric hydraulic rebar cutters compared by cutting capacity, cut speed, motor watts and weight for site work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR Rebar Cutter9.5/10View on Amazon - 2
Best Quick CutCENTALL RC16A Cutter9.5/10View on Amazon - 3
Best Mid-Range CutCENTALL RC20B Cutter9.5/10View on Amazon
A bundle of rebar waits by the footing, and every cut with a grinder throws sparks and eats a disc. The best electric rebar cutter shears the bar cold in seconds, with no sparks and no dust, and this guide compares three hydraulic cutters on cutting capacity, cut speed, motor watts and weight.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR Rebar Cutter: The widest cut at 4 to 22 mm, a 1350W motor and a stainless steel carry case. Check price on Amazon
- Best Quick Cut CENTALL RC16A Cutter: Cuts in 1 to 1.5 seconds with a 1000W motor and 15T of cutting force. Check price on Amazon
- Best Mid-Range Cut CENTALL RC20B Cutter: Cuts 4 to 20 mm at 110V with a 1.5 to 2 second cut speed. Check price on Amazon
The machines

VEVOR Electric Hydraulic Rebar Cutter 1350W 110V
A 1350W 110V portable hydraulic cutter that shears 4 to 22 mm rebar in 3.5 to 4.5 seconds, with a stainless steel carry case.
Pros
- Widest cut here, 4 to 22 mm
- 1350W pure copper coil motor
- Stainless steel carry case included
- Adjustable bolt for uniform lengths
Cons
- Slowest cut here, 3.5 to 4.5 seconds
- Heaviest here at 33.0 pounds
- No warranty term stated
- No safety listing stated

CENTALL Electric Hydraulic Rebar Cutter RC16A
A 1000W hydraulic cutter with 15T of cutting force that shears 4 to 16 mm rebar in 1 to 1.5 seconds, with Cr12MoV blades.
Pros
- Quickest cut here, 1 to 1.5 seconds
- 15T cutting force
- Cr12MoV blades that resist deforming
- One-button operation with no sparks
Cons
- Smallest capacity here, 4 to 16 mm
- No voltage stated
- No weight stated
- No warranty term stated

CENTALL Electric Hydraulic Rebar Cutter RC20B
A 110V hydraulic cutter that shears 4 to 20 mm rebar in 1.5 to 2 seconds, with Cr12MoV blades and a four-plunger pump body.
Pros
- Cuts 4 to 20 mm rebar
- 110V / 60 Hz power stated
- Cr12MoV blades that resist deforming
- One-button operation with no sparks
Cons
- Title states 1050W, bullets state 1000W
- No weight stated
- No warranty term stated
Other welders and gear to compare
CENTALL Electric Hydraulic Rebar Cutter RC16BCheck price on Amazon
CENTALL Electric Hydraulic Rebar Cutter RC20B 1050w/17T/#6/2sCheck price on Amazon
CENTALL Electric Hydraulic Rebar Cutter RC25 1600w/28T/#8/3sCheck price on Amazon
CENTALL Electric Hydraulic Rebar Cutter RC16ACheck price on Amazon
CCTI Portable Rebar CutterCheck price on Amazon
7/8 inch Electric Hydraulic Rebar Cutter 1400WCheck price on Amazon
CZS Sheet Metal Cutter for DrillCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Capacity | Cut speed | Motor | Weight | Power |
|---|---|---|---|---|---|---|
| VEVOR Rebar Cutter | 9.5/10 | 4-22 mm (#7) | 3.5-4.5 s | 1350W | 33.0 lb | 110V |
| CENTALL RC16A Cutter | 9.5/10 | 4-16 mm (#5) | 1-1.5 s | 1000W | Not stated | Not stated |
| CENTALL RC20B Cutter | 9.5/10 | 4-20 mm (#6) | 1.5-2 s | 1050W / 1000W | Not stated | 110V |
Ratings in this table are the makers’ own claims taken from each product page (29 October 2026).
What the listings tell you
We read 3 listings. Two state 110V power, one states a weight, and none states a warranty term or a safety listing. The VEVOR is the only one with a stated weight, 33.0 pounds, and the only one that ships with a carry case. The two CENTALL listings share the same blade, pump and one-button language, and the RC20B listing contradicts itself on motor watts, with the title stating 1050W and the bullets stating 1000W.
Buying guide: best electric rebar cutter
Cutting capacity
Capacity is the bar size the cutter shears. The CENTALL RC16A cuts 4 to 16 mm, the CENTALL RC20B cuts 4 to 20 mm, and the VEVOR cuts 4 to 22 mm. Match the cutter to the largest bar on the job, and check whether the listing counts the bar by number or by millimetres: the RC16A is a number 5 cutter, the RC20B is a number 6 cutter, and the VEVOR is a number 7 cutter. All three cut medium-carbon, low-carbon, round and threaded rebar.
Cut speed
The RC16A cuts in 1 to 1.5 seconds, the RC20B in 1.5 to 2 seconds, and the VEVOR in 3.5 to 4.5 seconds. A quicker cut matters on a long run of bars, but a slower cut with an adjustable bolt can hold length better: the VEVOR has an adjustable bolt that fixes the bar so every length comes out uniform. All three cut cold, with no sparks and no dust, and all three work with one button.
Motor and power
The RC16A runs a 1000W pure copper coil motor with 15T of cutting force, the VEVOR runs a 1350W pure copper coil motor, and the RC20B title states 1050W while its bullets state a 1000W motor. The VEVOR and the RC20B state 110V, and the RC20B also states 60 Hz. The RC16A states no voltage, so check the power on the job site before buying. All three are driven by hydraulic pumps, and all three claim low noise and a low failure rate.
Weight and carry
The VEVOR weighs 33.0 pounds and comes with a stainless steel carry case, and it measures 16.53 by 4.72 by 9.06 inches. Neither CENTALL listing states a weight. A heavier cutter stays put on the bench, while a lighter one moves easier between cuts, so check the weight figure before you carry one across a site. All three have an ergonomically designed handle for easy use.
Before You Strike an Arc
- Check the power on site: the VEVOR and the RC20B state 110V, and the RC16A states no voltage.
- Check the blades on arrival: all three use fixed heads with multiple screws, and the CENTALL cutters use Cr12MoV blades.
- Keep the cut area clear: hydraulic cutters shear cold with no sparks and no dust, but the cut bar drops free.
- The VEVOR comes with a stainless steel carry case for storage between jobs.
- Match the cutter to the bar: the VEVOR cuts up to 22 mm, the RC20B up to 20 mm, and the RC16A up to 16 mm.
FAQ for welders
How do you use a rebar cutter?
Put the bar in the cut, press the button and the hydraulic pump shears it in seconds. The VEVOR adds an adjustable bolt to fix the bar so every length comes out uniform. All three cut cold, with no sparks and no dust, and all three are built for construction sites, bridge work, roads and house building.
How does a rebar cutter work?
A hydraulic pump drives the blade through the bar in one stroke. The CENTALL cutters use a four-plunger pump body, and the VEVOR uses a hydraulic pump driven by a pure copper coil motor. Cold cutting shears the bar instead of grinding it, so it makes no iron debris and no sparks.
How do you use a rebar cutter drill bit?
A rebar cutter drill bit is a different tool from these cutters: it drills through rebar with a rotary hammer, while these machines shear the bar with a hydraulic pump. None of the three listings here is a drill bit, so check the bit listing for its own guidance. These three are for cutting bar to length, not for drilling holes.
What size bolt cutters do I need for rebar?
Bolt cutters and hydraulic rebar cutters are different tools: bolt cutters squeeze the bar with long handles, while these machines shear it with a hydraulic pump. The VEVOR cuts up to 22 mm, the RC20B up to 20 mm, and the RC16A up to 16 mm. For bars above those sizes, a larger cutter is needed, and the bar number on the listing tells you the largest size it shears.
Related: the metal fab tools hub, the best hydraulic rebar bender, and the hand vs hydraulic rebar bender. Also see our bolt cutters vs rebar cutter. Also see our best plasma cutter.
Scoring, line by line
Each cutter is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None of the three states a safety listing or a warranty term, so safety and warranty are zero for all three, and the ranking comes from the other three criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR Rebar Cutter | 9.5 | 32 | 22 | 21 | 0 | 0 |
| CENTALL RC16A Cutter | 9.5 | 30 | 21 | 20 | 0 | 0 |
| CENTALL RC20B Cutter | 9.5 | 29 | 21 | 20 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




