Best Hydraulic Rebar Bender (2026): 3 Picks Compared
Three electric hydraulic rebar benders, from 1100W to 1500W, compared by motor power, bend size, bend time and angle for rebar work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPEResQ NRB-20 Bender9.6/10View on Amazon - 2
Best Fast BendCENTALL HRB16 Bender9.5/10View on Amazon - 3
Best PowerVEVOR RN-22 Bender9.5/10View on Amazon
A footing needs stirrups bent to the same angle, and the rebar is too thick to bend by hand over a pipe. The best hydraulic rebar bender pushes the bar to the angle with a button press, so the bends match and the work moves on. This guide compares electric hydraulic benders by motor power, bend size, bend time and angle, using only what each listing publishes.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall PEResQ NRB-20 Bender: 1200W, bends up to 3/4 inch rebar, 0 to 130 degree angle, with a carrying case. Check price on Amazon
- Best Fast Bend CENTALL HRB16 Bender: 1100W, bends 5/8 inch rebar in 2 to 2.5 seconds, with an eccentric wheel. Check price on Amazon
- Best Power VEVOR RN-22 Bender: 1500W, bends up to 3/4 inch rebar in 4 to 5 seconds, with a toolbox and oil can. Check price on Amazon
The machines
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | PEResQ Electric Hydraulic Rebar Bender | 9.6/10 | Buy on Amazon |
| 2 | CENTALL Electric Hydraulic Rebar Bender HRB16 | 9.5/10 | Buy on Amazon |
| 3 | VEVOR Electric Hydraulic Rebar Bender | 9.5/10 | Buy on Amazon |

PEResQ Electric Hydraulic Rebar Bender
A 1200W electric hydraulic rebar bender, 120V, that bends up to 3/4 inch rebar with a 0 to 130 degree angle, in a 28.7 lb aluminum body.
Pros
- Bends up to 3/4 inch #6 20mm rebar
- Adjustable 0 to 130 degree bending angle with a screw angle stop
- Lightweight 28.7 lb aluminum body, per the listing
- Includes a carrying case, spare carbon brushes and tools
Cons
- No bend time is stated
- No warranty term is stated
- No stated range for thinner rebar
- Aluminum body, while the CENTALL pick states a steel body

CENTALL Electric Hydraulic Rebar Bender HRB16
An 1100W electric hydraulic rebar bender that bends 5/8 inch rebar in 2 to 2.5 seconds, with an eccentric wheel and a steel body.
Pros
- Bends 5/8 inch rebar in 2 to 2.5 seconds, the fastest stated time here
- Eccentric wheel expands the bending range for thinner bars
- Sturdy steel body with a high-strength bending block
- One button operation with a relief valve for the piston return
Cons
- No bend angle is stated
- No weight is stated
- No warranty term is stated

VEVOR Electric Hydraulic Rebar Bender
A 1500W electric hydraulic rebar bender that bends up to 3/4 inch rebar in 4 to 5 seconds, with a metal toolbox and oil can.
Pros
- 1500W pure copper motor, the most power here
- Bends up to 3/4 inch #6 (6 to 20 mm) rebar
- Adjustable bending angles from 0 to 90 degrees
- Metal toolbox and oil can included
Cons
- Body made from lightweight PVC, per the listing
- Heaviest here at 44.1 pounds, per the spec table
- No warranty term is stated
Other welders and gear to compare
CENTALL Electric Hydraulic Rebar Bender HRB16Check price on Amazon
CENTALL Electric Hydraulic Rebar Bender HRB25 1200w/17T/#8/4sCheck price on Amazon
CENTALL Electric Hydraulic Rebar Bender HRB25 17T/#8/1200w/4sCheck price on Amazon
CENTALL Electric Hydraulic Rebar Bender HRB32 1600w/28T/4sCheck price on Amazon
PEResQ Electric Hydraulic Rebar BenderCheck price on Amazon
PEResQ Electric Rebar BenderCheck price on Amazon
VEVOR Electric Hydraulic Rebar BenderCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Motor | Bends up to | Bend time | Bend angle | Weight |
|---|---|---|---|---|---|---|
| PEResQ NRB-20 Bender | 9.6/10 | 1200W | 3/4 in, #6, 20 mm | Not stated | 0 to 130 degrees | 28.7 lb |
| CENTALL HRB16 Bender | 9.5/10 | 1100W | 5/8 in, #6-16 mm | 2 to 2.5 s | Not stated | Not stated |
| VEVOR RN-22 Bender | 9.5/10 | 1500W | 3/4 in, #6, 6-20 mm | 4 to 5 s | 0 to 90 degrees | 44.1 lb |
All specs here repeat what the maker rates and the listing prints, copied down 1 November 2026.
Best hydraulic rebar bender buying guide
Motor power
Motor power decides how hard the bender pushes. The VEVOR bender runs on a 1500W pure copper motor, the PEResQ bender on a 1200W pure copper motor, and the CENTALL bender on a 1100W pure copper motor. All three listings state a pure copper motor, and the PEResQ listing states 120V 60Hz power with a 3-plunger triangular hydraulic pump for smooth, stable bending force. The CENTALL listing states low noise and a low failure rate when running, and the VEVOR listing states robust performance from its 1500W motor.
Bend size
Bend size decides which bar the bender takes. The PEResQ bender handles up to 3/4 inch #6 20mm rebar, and the VEVOR bender bends up to 3/4 inch #6, from 6 to 20mm. The CENTALL bender bends 5/8 inch rebar, listed as #6-16 mm, which is the smallest maximum here. The VEVOR listing states its bender suits medium carbon, low carbon, round and threaded rebar. The CENTALL listing states its eccentric wheel expands the bending range, and turning 180 of the eccentric wheel can bend thinner steel bars. For the hand tool version, see hand vs hydraulic rebar bender.
Bend time and angle
Bend time and angle decide how fast and how far the bar bends. The CENTALL bender bends 5/8 inch rebar in 2 to 2.5 seconds, the fastest stated time here, but states no bend angle. The VEVOR bender bends solid rebar within 4 to 5 seconds, with adjustable bending angles from 0 to 90 degrees. The PEResQ bender states no bend time, but offers an adjustable 0 to 130 degree bending angle, with a precision screw angle stop and O-ring marker to preset and repeat angles. The PEResQ listing states the angle stop helps deliver consistent, accurate bends for repeated rebar work.
Weight and carry
Weight decides how far the bender travels around the site. The PEResQ bender weighs 28.7 lb, or 13 kg, in an aluminum body, and the listing states the aircraft-grade aluminum housing provides strength, durability and better heat dissipation than many traditional heavy rebar bending machines. The VEVOR bender weighs 44.1 pounds, per the spec table, and comes with a collision-resistant metal toolbox. The CENTALL listing states no weight, but describes the bender as portable and lightweight, with a back grip handle and a front handle, and states that gripping the front handle can easily lift the bending machine for high-altitude operations.
What the listings leave out
Some specs are missing here, and the gaps matter. No listing states a warranty term, so no pick earns warranty credit here. No listing states a safety listing, so every pick scores zero on safety. The CENTALL listing states no weight and no bend angle. The PEResQ listing states no bend time. The VEVOR listing states the body is made from lightweight PVC, which is the only body material stated for that pick. For cutting rebar to length, see best bolt cutters for rebar.
Before You Strike an Arc
- The PEResQ listing states 120V 60Hz power; the CENTALL and VEVOR listings state no voltage.
- Check the rebar size before ordering: the CENTALL bender states 5/8 inch, while the PEResQ and VEVOR benders state up to 3/4 inch.
- The VEVOR listing includes an oil can, and the PEResQ listing includes spare carbon brushes and a carrying case.
- The CENTALL listing states to pull the relief valve after the bend so the piston returns to its original position.
- The VEVOR listing states to pull the hydraulic valve to safely reset after bending.
FAQ for welders
What is a rebar bender?
A rebar bender is a machine that bends steel rebar to an angle for footings, walls and other concrete work. The three benders here are electric hydraulic machines, with a motor and a hydraulic pump that push a bending block against the bar, so the bar bends without hand force.
What size rebar can these benders bend?
It depends on the pick. The CENTALL bender bends 5/8 inch rebar, listed as #6-16 mm. The PEResQ bender handles up to 3/4 inch #6 20mm rebar. The VEVOR bender bends up to 3/4 inch #6 rebar, from 6 to 20mm, including medium carbon, low carbon, round and threaded rebar.
How fast do these benders bend rebar?
Two listings state a time. The CENTALL bender bends 5/8 inch rebar in 2 to 2.5 seconds, per the listing. The VEVOR bender bends solid rebar within 4 to 5 seconds, per the listing. The PEResQ listing states no bend time.
Do these benders come with a case?
Two do. The PEResQ listing includes a sturdy carrying case, spare carbon brushes and essential tools. The VEVOR listing includes a collision-resistant metal toolbox that holds the machine and various tools. The CENTALL listing states no case.
What angle can these benders bend to?
Two listings state an angle. The PEResQ bender offers an adjustable 0 to 130 degree bending angle, with a precision screw angle stop and O-ring marker. The VEVOR bender offers adjustable bending angles from 0 to 90 degrees. The CENTALL listing states no bend angle.
Related: hand vs hydraulic rebar bender. Also see our best bolt cutters for rebar. Also see our best cut-off wheel for rebar. Also see our best angle grinder for cutting rebar. Also see our metal fab tools.
Scoring, line by line
Each bender is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety listing or a warranty term, so every bender here scores zero on those two criteria; the ranking comes from the other three.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| PEResQ NRB-20 Bender | 9.6 | 32 | 22 | 22 | 0 | 0 |
| CENTALL HRB16 Bender | 9.5 | 32 | 21 | 21 | 0 | 0 |
| VEVOR RN-22 Bender | 9.5 | 30 | 21 | 21 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




