Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Cut Off Wheel for Rebar (2026): 5 Diamond Picks

Five diamond cut-off wheels for rebar, compared by stated cut count, diameter, max RPM, arbor fit and warranty, using only what each listing publishes.

Best Cut Off Wheel for Rebar (2026): 5 Diamond Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Lenox MetalMax 14 inBest OverallLenox MetalMax 14 in9.6/10View on Amazon
  2. 2EZARC Diamond 3 inBest for Compact SawsEZARC Diamond 3 in9.6/10View on Amazon
  3. 3FOXBC 3 in 3-PackBest 3-Pack ValueFOXBC 3 in 3-Pack9.6/10View on Amazon
  4. 4EZARC Diamond 6 inBest 6 in PickEZARC Diamond 6 in9.6/10View on Amazon

A footing full of rebar stubs is the job that eats bonded wheels for breakfast. You need clean cuts, fast, without swapping discs every few bars, and that is exactly what the best cut off wheel for rebar promises: a diamond edge on a steel body that keeps its diameter from the first cut to the last. We compared five diamond wheels by stated cut count, diameter, max RPM, arbor fit and warranty, using only what each listing publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Lenox MetalMax 14 in: 14 in chop saw wheel with 1,000+ stated cuts and a limited lifetime warranty. Check price on Amazon
  • Best for Compact Saws EZARC Diamond 3 in: 5,000+ stated cuts on rebar; 3 in wheel for compact saws, 20,300 RPM max. Check price on Amazon
  • Best 3-Pack Value FOXBC 3 in 3-Pack: Three 3 in diamond wheels with less-spark cutting for compact saws. Check price on Amazon
  • Best 6 in Pick EZARC Diamond 6 in: 5,000+ stated cuts on rebar in a 6 in wheel for angle grinders. Check price on Amazon

The machines

LENOX Tools Cutting Wheel, Diamond Edge

LENOX Tools Cutting Wheel, Diamond Edge

Lenox9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14 in diamond-edge chop saw wheel with 1,000 or more stated cuts, a solid steel body and a limited lifetime warranty.

Pros

  • 1,000 or more cuts stated without changing the wheel
  • Limited lifetime warranty, the only warranty term stated here
  • Solid steel wheel body stated to greatly reduce breakage risk
  • Diamond construction maintains diameter and cutting depth through the wheel's life

Cons

  • 14 in diameter fits chop saws only, not angle grinders or compact saws
  • 1,000+ stated cuts is the lowest cut count claimed here
  • 1.5 lb and 14 in across needs real shop space to store
EZARC Diamond Cutting Wheel 3 x 3/8 Inch

EZARC Diamond Cutting Wheel 3 x 3/8 Inch

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 in diamond cut-off wheel with 5,000+ stated cuts on rebar, a 3/8 in arbor and a 20,300 RPM maximum.

Pros

  • 5,000+ cuts on rebar stated, the highest cut count claimed here
  • Solid steel wheel body stated to greatly reduce shatter and injury risk
  • Maintains its original diameter through the wheel's life for control
  • 100% contaminant-free with less dust than bonded abrasives, per the listing

Cons

  • 3 in diameter suits compact saws only
  • Single wheel in the pack
  • No warranty term is stated
EZARC Diamond Cutting Wheel 6'' x 7/8 Inch

EZARC Diamond Cutting Wheel 6'' x 7/8 Inch

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 in diamond cut-off wheel with 5,000+ stated cuts on rebar for angle grinders, with a 7/8 in arbor and 10,100 RPM max.

Pros

  • 5,000+ cuts on rebar stated, matching the 3 in sibling
  • 6 in diameter fits standard angle grinders
  • Maintains its original diameter through the wheel's life
  • 100% contaminant-free with less dust than bonded abrasives, per the listing

Cons

  • Single wheel in the pack
  • 7.05 oz wheel needs a grinder rated for its 10,100 RPM max
  • No warranty term is stated
FOXBC 3 Inch Diamond Cut Off Wheel with 5000

FOXBC 3 Inch Diamond Cut Off Wheel with 5000

FOXBC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 3 in diamond cut-off wheels with 5,000+ stated metal cuts on rebar, a 3/8 in arbor and 20,000 RPM max.

Pros

  • Three wheels in the pack, the only multi-pack here
  • 5,000+ metal cutting on rebar stated, with 100X longer life than bonded claimed
  • Less sparks and dust than bonded discs, per the listing
  • Names compact-saw fit: DeWalt, Dremel Saw-Max, Milwaukee, Ryobi and Ridgid

Cons

  • 3 in diameter suits compact saws only
  • No warranty term is stated
  • The electro-plating evenness claim is the maker's word, not a measured spec
SHDIATOOL 5 Inch Metal Cutting Diamond Blade All

SHDIATOOL 5 Inch Metal Cutting Diamond Blade All

SHDIATOOL9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 in vacuum-brazed diamond blade with a 7/8 in arbor and a 12,000 RPM max safe speed for hand-held grinders and trim saws.

Pros

  • Vacuum-brazed diamond grains on a heat-treated hi-speed steel core
  • 12,000 RPM maximum safe operating speed stated
  • 2.3 to 2.4 mm kerf for the 5 in blade
  • Widest material list here, from rebar and cast iron to masonry and wood

Cons

  • No cut-count claim for rebar, unlike the 5,000+ and 1,000+ claims elsewhere
  • The 'unbreakable' wording is the maker's claim, not a rating
  • No warranty term is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Diameter Cuts (stated) Max RPM Arbor / fit Pack Warranty
Lenox MetalMax 14 in 9.6/10 14 in 1,000+ 4,300 Chop saw 1 Limited lifetime
EZARC Diamond 3 in 9.6/10 3 in 5,000+ 20,300 3/8 in arbor 1 Not stated
EZARC Diamond 6 in 9.6/10 6 in 5,000+ 10,100 7/8 in arbor 1 Not stated
FOXBC 3 in 3-Pack 9.6/10 3 in 5,000+ 20,000 3/8 in arbor; compact saws 3 Not stated
SHDIATOOL Diamond 5 in 9.5/10 5 in Not stated 12,000 7/8 in arbor; grinders, trim saws 1 Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 20 October 2026.

Buying guide: best cut off wheel for rebar

Diamond vs bonded

Every pick here is a diamond wheel, and the listings sell the same idea: diamond holds its diameter while bonded wheels wear down, so the cut depth stays consistent and the dust drops. The stated life multiples run from 30X (Lenox) to 100X (EZARC, FOXBC) over bonded wheels, all maker claims. If you cut rebar often, diamond is the wheel type to buy; bonded is the wheel you buy when the job is one afternoon.

Diameter and the saw you own

Match the wheel to the saw, not the other way around. The 3 in wheels fit compact saws, the 5 and 6 in wheels fit angle grinders and trim saws, and the 14 in Lenox fits a chop saw only. A bigger wheel cuts deeper per pass and lasts longer per the listings, but it needs the bigger saw to spin it. Check the saw you own before you pick a diameter.

Stated cut counts

Three picks state a cut count: 5,000+ on rebar for both EZARC wheels, 5,000+ metal cutting on rebar for the FOXBC 3-pack, and 1,000 or more for the Lenox. The SHDIATOOL states none, so its rebar life is unclaimed. Maker cut counts are not a promise of your results, but they are the only life figures the listings give, so compare them as stated.

Max RPM and arbor fit

Every wheel here states a max RPM, from 4,300 on the 14 in Lenox to 20,300 on the 3 in EZARC. Never spin a wheel faster than its stated max; check your saw’s no-load speed against it. Arbors are 3/8 in on the 3 in wheels and 7/8 in on the 5 and 6 in wheels, so confirm the arbor matches your saw before ordering.

Dust, sparks and shatter

The listings agree on one thing: a solid steel body greatly reduces the risk of shatter versus bonded discs, and diamond cutting makes less sparks and dust. The EZARC wheels add that they are 100% contaminant-free. None of that replaces a face shield, gloves and keeping the work area clear of anything that can catch a spark.

Use as directed. Keep the area around the cut clear of anything that can burn, since cutting rebar throws hot sparks and slag. Wear a face shield, gloves and hearing protection, keep cords off the floor where hot metal lands, and never exceed the wheel’s stated max RPM. See the OSHA welding overview and our welding safety gear checklist.

Before You Strike an Arc

  • Match the arbor: 3/8 in on the 3 in wheels, 7/8 in on the 5 and 6 in wheels; the 14 in Lenox needs a chop saw.
  • Check max RPM: compare the wheel’s stated max, 4,300 to 20,300 RPM here, against your saw’s no-load speed.
  • Confirm rebar is listed: every pick here names rebar in its compatible materials, per the bullets.
  • Inspect on arrival: look the wheel over for cracks or damage before the first cut, and retire any wheel that takes a hard drop.
  • One wheel or three: the FOXBC 3-pack keeps a spare on hand; the rest are single wheels.

FAQ for welders

Can I cut rebar with a diamond wheel?

Yes. Every pick here names rebar in its listing, and the EZARC and FOXBC wheels state 5,000+ cuts on rebar. Diamond holds its diameter where bonded wheels wear down, so the cut depth stays consistent.

What size cut-off wheel do I need for rebar?

It depends on the saw: 3 in for compact saws, 5 or 6 in for angle grinders, 14 in for a chop saw. A bigger wheel cuts deeper per pass, but only on the saw built for it.

Do diamond wheels really outlast bonded wheels?

The listings claim 30X to 100X longer life than bonded wheels, which are maker claims, not measured results. What is checkable is the cut count: three picks state one, from 1,000+ to 5,000+ cuts.

Can I use a 3 in wheel on an angle grinder?

Only if the grinder accepts a 3 in wheel on a 3/8 in arbor and stays under the wheel’s 20,000 to 20,300 RPM max. The 3 in picks here are aimed at compact saws, so check your saw’s specs first.

Will these wheels cut anything besides rebar?

Yes. The listings name steel, stainless, cast iron, angle iron, sheet metal and pipe, and the SHDIATOOL adds masonry, ductile iron pipe and wood. Match the material to the listing before you cut.

Related: the best angle grinder for cutting rebar, the best cut off wheel for aluminum and the best cut off wheel for cast iron. Also see our cut off tool vs angle grinder comparison and the dry cut saw vs abrasive chop saw comparison.

Scoring, line by line

Each wheel is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a recognized safety certification, so safety points come from stated features like the solid steel body and the published max RPM. Only the Lenox states a warranty term, a limited lifetime warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Lenox MetalMax 14 in 9.6 28 21 20 5 3
EZARC Diamond 3 in 9.6 32 21 21 5 0
EZARC Diamond 6 in 9.6 30 21 20 5 0
FOXBC 3 in 3-Pack 9.6 29 20 21 5 0
SHDIATOOL Diamond 5 in 9.5 28 21 20 5 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides