Types of Drill Bit: Which One to Buy
Twist bits, cobalt bits and driver bits each suit a different job, and this guide explains which type fits the metal on the bench and how to read a listing before buying.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Cobalt Drill Bit Set - 115Pcs M35 HiSS Bits9.6/10View on Amazon - 2
Milwaukee Shockwave Bit & Drill Bit Kit w/ 60 Pcs9.5/10View on Amazon
A bent bracket on the bench, a hole to drill through a steel plate, and a bit that skates across the surface instead of biting: that is the moment the types of drill bit start to matter. Twist bits, cobalt bits and step bits all cut holes, while driver bits turn fasteners instead, and each type suits a different job. This guide walks through the main types, how to read a listing, and which set fits the work on the bench.
WeldGearLab earns a commission when you buy through links on product pages, at no extra cost to you. Read the affiliate disclosure.

Cobalt Drill Bit Set - 115Pcs M35 HiSS Bits
A 115-piece M35 cobalt twist bit set, 1/16 in to 1/2 in, with letter and numbered sizes, a 135-degree split point and a metal index box.
Pros
- M35 cobalt steel with 5% cobalt, per the listing
- 135-degree split point, self-centering, per the listing
- 115 pieces: 29 fractional, 26 letter and 60 numbered sizes
- Metal index box with size markings included
Cons
- No warranty term is stated
- No certification is stated
- Shank diameter is not stated, only round straight shank
- No storage box dimensions are stated

Milwaukee Shockwave Bit & Drill Bit Kit w/ 60 Pcs
A 60-piece Shockwave bit and drill bit kit weighing 2.0 lb, whose listing claims up to 50 times longer service life.
Pros
- 60 pieces in a kit
- Listing claims up to 50 times longer service life
- Weighs 2.0 lb per the spec table
- Kit size stated: 1.5 x 12.52 x 10.32 inches
Cons
- No bit sizes are stated
- No bit material is stated
- No warranty term is stated, only Manufacturer Warranty
- The 50 times longer life claim compares with unnamed impact drive bits
Types of Drill Bit: The Main Types
A twist bit is the shop standard: a helical flute that lifts chips out of the hole as it turns. The SEDIANAS set in this guide is a twist bit set, with a fully ground twist design that the listing states clears particles and cuts friction and heat. A cobalt twist bit adds cobalt to the steel for hard metal, and the SEDIANAS listing names M35 high speed steel with 5% cobalt for hardened metal, stainless steel, cast iron and high temperature alloy. A driver bit turns screws instead of cutting holes, and the Milwaukee kit in this guide combines driver bits with drill bits in a box. A step bit drills a range of hole sizes in thin sheet, and a spade or brad point bit suits wood rather than steel.
Side by Side
| Product | Type | Pieces | Material |
|---|---|---|---|
| SEDIANAS Cobalt 115-Pc | M35 cobalt twist bits | 115 | M35 cobalt high speed steel |
| Milwaukee Shockwave Kit | Driver and drill bits | 60 | Not stated |
The table above compares the sets in this guide by type, piece count and material. The cobalt set covers more sizes and materials, while the Shockwave kit combines driver bits with drill bits. Read the listing for the sizes and the material before buying, since neither set states every figure a shop might want.
When a Cobalt Set Is the Right Call
- Stainless steel and hardened metal. The listing names M35 high speed steel with 5% cobalt, which the maker states gives greater hardness and heat resistance than ordinary bits.
- Cast iron and high temperature alloy. The listing names them among the hard materials the set cuts, alongside stainless steel and hardened metal.
- Many sizes in a box. The set holds 115 pieces: 29 fractional sizes, 26 letter sizes and 60 numbered sizes, so the size needed is usually in the box.
- Clean starts. The 135-degree split point is self-centering, so the bit starts where it is placed instead of walking across the surface.
When a Driver and Drill Kit Is the Right Call
- Mixed driving and drilling. The Milwaukee kit combines driver bits with drill bits, so driving fasteners and drilling holes share a box.
- Impact drive bits. The listing compares the bits with other impact drive bits on the market, and claims up to 50 times longer service life.
- Light carry. The kit weighs 2.0 lb per the spec table, and measures 1.5 inches x 12.52 inches x 10.32 inches.
- Long life claim. The maker’s claim is up to 50 times longer service life, though the listing names no comparison bit by name.
How to Read a Drill Bit Listing
Check the material: M35 with 5% cobalt names the steel and the cobalt share, while a listing that names no material gives no basis for judging the bit on hard metal. Check the sizes: the SEDIANAS listing states fractional sizes from 1/16 in to 1/2 in in 1/64th increments, plus letter sizes A to Z and numbered sizes #1 to #60, while the Milwaukee listing states no bit sizes at all. Check the point and the shank: a 135-degree split point starts true, and a round straight shank fits a standard chuck. Check the box and the warranty: a metal index box with size markings keeps the set sorted, and a warranty with no term stated is a warranty in name only.
Drill Bits for the Shop
The cobalt set below handles the drilling in hard metal and the sizing work, while the Shockwave kit handles driving and general drilling.
FAQ for welders
What is the difference between a twist bit and a cobalt bit?
A cobalt bit is a twist bit made from cobalt steel. The SEDIANAS listing names M35 high speed steel with 5% cobalt, which the maker states gives greater hardness and heat resistance than ordinary bits. A standard twist bit suits general holes, while a cobalt bit suits hardened metal, stainless steel and cast iron.
What sizes does the cobalt set cover?
Fractional sizes from 1/16 in to 1/2 in, letter sizes A to Z and numbered sizes #1 to #60. The listing counts 29 fractional pieces, 26 letter pieces and 60 numbered pieces, for 115 pieces in the box. The fractional sizes step in 1/64th increments.
What does a 135-degree split point do?
It helps the bit start where it is placed. The SEDIANAS listing states the 135-degree split point is self-centering to prevent walk-off, which makes drilling more precise. See the guide to drill bit point angles for the comparison.
Can I use a cobalt bit on wood and plastic?
Yes, the SEDIANAS listing names wood and plastics among the materials it suits, alongside hardened metal, stainless steel and cast iron. A cobalt bit is made for hard metal, but the listing states it works on most soft and hard objects. Match the bit to the material, since a hard bit can grab in soft stock.
What should I check before buying a bit set?
The material, the sizes, the point and the shank. The SEDIANAS listing states M35 steel, 5% cobalt, a 135-degree split point and a round straight shank, while the Milwaukee listing states no bit sizes or material. A set that states its sizes and steel is easier to judge than a set that states neither.
Related: metal fab tools hub, best twist drill bit set, best cobalt drill bit set and best drill bits for steel. Also see the carbide and cobalt drill bit comparison and the cobalt drill bit comparison.




