M35 vs M42 Cobalt Drill Bits: Which One Should You Buy?
Two M35 cobalt drill bit sets and two M42 sets compared on cobalt content, hardness, sizes and point style, using only what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Metric M42 8% Cobalt Twist Drill Bits Set9.7/10View on Amazon - 2
MACXCOIP 115Pcs Cobalt Drill Bit Set M35 HSS9.6/10View on Amazon - 3
Metric M42 8% Cobalt Twist Drill Bits9.6/10View on Amazon - 4
RCINDUS (20PCS) 1/8" Cobalt Drill Bit9.5/10View on Amazon
Verdict. Pick the M42 side for stated steel: the STROTON 19 piece set states 8% cobalt and 68 to 70 HRC, figures no M35 listing here states. Pick the M35 side for coverage: the MACXCOIP 115 piece set covers fractional, letter and numbered sizes in one case, and the RCINDUS box gives 20 pieces of one size.
A drill bit that skates across stainless instead of biting wastes the hole, the bit and the afternoon. The choice in m35 vs m42 cobalt drill bits comes down to what each listing actually states: cobalt content, hardness, sizes and point style. This comparison puts two M35 sets against two M42 sets, so the question gets answered from stated specs, not from habit.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four sets

Metric M42 8% Cobalt Twist Drill Bits Set
A 19 piece metric M42 set in 8% cobalt steel, 1mm to 10mm in 0.5mm steps, rated 68 to 70 HRC with a 135 degree split point and a 3 step design.
Pros
- 8% cobalt M42 steel, 68 to 70 HRC stated
- 19 pieces, 1mm to 10mm in 0.5mm steps
- 135 degree split point, 3 step design for stainless and hard metal
- Maker claims it typically runs three to five times faster
Cons
- No warranty term stated
- No case stated
- Metric only, no fractional, letter or numbered sizes
- Bit lengths stated for only 5 of the 19 sizes

MACXCOIP 115Pcs Cobalt Drill Bit Set M35 HSS
A 115 piece M35 cobalt jobber length set covering fractional, letter and numbered sizes from 1/16 in to 1/2 in, with a 135 degree point tip and an index storage case.
Pros
- 115 pieces: 29 fractional, 26 letter, 60 numbered
- Covers 1/16 in to 1/2 in, A to Z and #1 to #60
- 135 degree point tip, self-centering twist design
- Index storage case with size indexes
Cons
- Cobalt content not stated, only M35
- No hardness figure stated
- No warranty term stated
- No weight stated

Metric M42 8% Cobalt Twist Drill Bits
A 13 piece metric M42 set in 8% cobalt steel, 1.5mm to 6.5mm, with a 3 step design for stainless steel and hard metal.
Pros
- 8% cobalt M42 steel stated
- 13 pieces, 1.5mm to 6.5mm including 3.2mm and 4.8mm
- 3 step design for stainless and hard metal
- Maker claims three to five times faster running
Cons
- No hardness figure stated
- No point angle stated
- No warranty term stated
- Metric only, 1.5mm to 6.5mm range

RCINDUS (20PCS) 1/8" Cobalt Drill Bit
Twenty 1/8 in M35 cobalt bits with 5% cobalt, a 135 degree split point and a plastic storage case, for steel, stainless, cast iron, hard plastic and wood.
Pros
- 5% cobalt M35 stated, the only stated cobalt percentage on the M35 side
- 20 pieces of one size, 1/8 in, in a plastic storage case
- 135 degree split point, self-centering
- Diameter accuracy controlled within -0.03mm
Cons
- One size only, 1/8 in
- No hardness figure stated
- No warranty term stated
- No weight stated
Other welders and gear to compare
toolant M35 Cobalt Step Drill BitCheck price on Amazon
6pcs High-Speed Steel Metalworking SetCheck price on Amazon
LU&MN M35 Jobber Drill BitsCheck price on Amazon
VALYRIANTOOL 1/8" Cobalt Drill BitsCheck price on Amazon
IRWIN Drill Bit SetCheck price on Amazon
EZARC M35 Cobalt Stubby Drill Bit Set for Hard MetalCheck price on Amazon
M35 vs M42 Cobalt Drill Bits Side by Side
| STROTON M42 19-Piece | MACXCOIP M35 115-Piece | STROTON M42 13-Piece | RCINDUS M35 20-Piece | |
|---|---|---|---|---|
| Gear Score | 61 | 60 | 58 | 55 |
| Cobalt | 8% M42 | M35, content not stated | 8% M42 | 5% M35 |
| Sizes | 1mm to 10mm, 19 pcs | 1/16 in to 1/2 in, A to Z, #1 to #60, 115 pcs | 1.5mm to 6.5mm, 13 pcs | 1/8 in, 20 pcs |
| Point | 135 degree split point | 135 degree point tip | Not stated | 135 degree split point |
| Hardness | 68 to 70 HRC | Not stated | Not stated | Not stated |
| Weight | 1.0 lb | Not stated | 1.0 lb | Not stated |
| Case | Not stated | Index storage case | Not stated | Plastic storage case |
| Warranty | Not stated | Not stated | Not stated | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 6 November 2026. No listing here states a safety standard or a warranty term.
Cobalt content and hardness
The two M42 listings both state 8% cobalt. The RCINDUS M35 listing states 5% cobalt, and the MACXCOIP M35 listing states M35 without a percentage. Only one listing states a hardness figure: the STROTON 19 piece set at 68 to 70 HRC. The other three listings state no hardness figure, so hardness is noted only where it is stated. For the wider choice of bit materials, see our carbide vs cobalt drill bits guide.
Sizes and sets
The M35 side holds the most pieces. The MACXCOIP set holds 115 pieces: 29 fractional sizes from 1/16 in to 1/2 in in 1/64th steps, 26 letter sizes from A to Z, and 60 numbered sizes from #1 to #60. The RCINDUS box holds 20 pieces of one size, 1/8 in. The M42 side is metric only: the STROTON 19 piece set runs 1mm to 10mm in 0.5mm steps, and the 13 piece set runs 1.5mm to 6.5mm, including 3.2mm and 4.8mm.
Point and cutting
Three listings state a 135 degree point: both M35 sets and the STROTON 19 piece set, which calls it a 135 degree split point. The STROTON 13 piece set states no point angle. Both STROTON listings describe a 3 step design for stainless steel and hard metal and claim the bits typically run three to five times faster. The RCINDUS point prevents walking on hard surfaces, and the MACXCOIP twist design centers itself and clears chips faster. Our cobalt vs HSS drill bits for steel guide compares cobalt and high speed steel bits for steel work.
Weight and build
Both STROTON sets weigh 1.0 lb. The two M35 listings state no weight. The STROTON 19 piece set gives bit lengths for 5 of its 19 sizes, from 3.4cm at 1mm to 13cm at 10mm. The MACXCOIP case measures 15.35 in x 6.3 in x 4.33 in.
What is in the box
The RCINDUS bits come in a plastic storage case. The MACXCOIP set comes in an index storage case with drill holders and size indexes. Neither STROTON listing states a case.
Warranty
None of the four listings states a warranty term, so warranty earns no points for any pick here.
Choose the M35 side if
- One set that covers fractional, letter and numbered sizes.
- 20 pieces of 1/8 in for a size you burn through.
- A stated cobalt percentage on the M35 side: 5% on the RCINDUS set.
- Inch sizes, not metric.
Choose the M42 side if
- The highest stated cobalt content here: 8% on both sets.
- A stated hardness figure: 68 to 70 HRC on the 19 piece set.
- Metric holes from 1mm to 10mm.
- The in-between metric sizes 3.2mm and 4.8mm in the 13 piece set.
Before You Strike an Arc
- Check the bit size against the hole first: the sets here run from 1mm to 1/2 in.
- Clamp the work and mark the spot before you drill.
- Wear eye protection, and keep hands clear of the bit while it turns.
- On arrival, count the pieces against the stated count, 20, 115, 19 or 13.
- Drill stainless slow with cutting fluid and let the bit cut, and clear chips often.
FAQ for welders
What is the difference between M35 and M42 cobalt drill bits?
It is the grade the maker states. The M35 listings here state M35 high speed steel, with 5% cobalt stated on the RCINDUS set. The M42 listings state M42 steel with 8% cobalt. Only the STROTON 19 piece set states a hardness figure, 68 to 70 HRC. Compare what each listing actually states, since the two sides do not state the same figures.
Are M42 bits better for stainless steel?
The M42 listings describe a 3 step design for stainless steel and hard metal and claim three to five times faster running. The M35 listings also list stainless steel among their uses. No M35 listing states a hardness figure, so the listings do not support a hardness comparison between the sides.
What sizes do these cobalt drill bit sets cover?
The MACXCOIP M35 set covers 1/16 in to 1/2 in, A to Z and #1 to #60 in 115 pieces. The RCINDUS box holds 20 pieces of 1/8 in. The STROTON M42 sets are metric: 1mm to 10mm in 19 pieces, and 1.5mm to 6.5mm in 13 pieces.
Do any of these drill bit sets come with a warranty?
No. None of the four listings states a warranty term.
Which side should a home shop pick?
Pick M35 for inch-size coverage in one case, and M42 for metric sizes with a stated 8% cobalt content. The STROTON 19 piece set is the only listing that states a hardness figure.
Related: the best cobalt drill bit set, the best drill press for metalworking, the best magnetic drill under 1000, black oxide vs cobalt drill bits and our metal fab tools hub.
Scoring, line by line
Each set is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing here states a safety standard or a warranty term, so the Gear Score differences come from performance, build and value alone.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| STROTON M42 19-Piece | 9.7 | 32 | 22 | 20 | n/a | 0 |
| MACXCOIP M35 115-Piece | 9.6 | 30 | 21 | 21 | n/a | 0 |
| STROTON M42 13-Piece | 9.6 | 29 | 21 | 20 | n/a | 0 |
| RCINDUS M35 20-Piece | 9.5 | 28 | 20 | 19 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




