Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

118 vs 135 Degree Drill Bit: Which One Should You Buy?

Two 118 degree listings and one listing that names a 135 degree split point in its title but 118-degree points in its bullets, compared on material, size and what stays unclear.

118 vs 135 Degree Drill Bit: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ENERTWIST 230 PCS Drill Bit Kit Set for MetalENERTWIST 230 PCS Drill Bit Kit Set for Metal9.6/10View on Amazon
  2. 2uxcell 23/32" Drill Bit 1/2" Reduced 3-Flat Shankuxcell 23/32" Drill Bit 1/2" Reduced 3-Flat Shank9.6/10View on Amazon
  3. 3Century Drill & Tool 11623 Letter Gauge Drill BitCentury Drill & Tool 11623 Letter Gauge Drill Bit9.5/10View on Amazon

Verdict. Pick the 118 degree side for drilling in wood, plastic and soft metal, where both listings agree on the point angle. Pick the 135 degree side only after confirming the point angle, since the only listing on that side disagrees with itself.

A bit that walks across the surface ruins the hole before it starts, and 118 vs 135 degree drill bit is the choice behind that point. This comparison covers the listings on each side on stated point angle, material, size and what each listing leaves unclear, using the three listings as concrete examples.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The three bits

ENERTWIST 230 PCS Drill Bit Kit Set for Metal

ENERTWIST 230 PCS Drill Bit Kit Set for Metal

ENERTWIST9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 230-piece titanium-coated high-speed steel kit covering sizes from 3/64 inch to 1/2 inch for metal and wood.

Pros

  • 230 pieces from 3/64 inch to 1/2 inch in one kit
  • Titanium coating reduces heat buildup for longer life
  • Indexed tray with sponge cushion keeps sizes organized
  • High-speed steel for metal, wood, fiberglass and plastics

Cons

  • Not for use on concrete or masonry
  • Listing gives the size range, not individual bit dimensions
  • No warranty term is stated
  • Life claim gives an unclear multiple against conventional bits
uxcell 23/32" Drill Bit 1/2" Reduced 3-Flat Shank

uxcell 23/32" Drill Bit 1/2" Reduced 3-Flat Shank

uxcell9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single reduced-shank bit with a 118 degree point for light-duty machining in wood, plastic and soft metal.

Pros

  • 118 degree conventional point that resists sliding
  • 4241 high-speed steel for hardness, wear resistance and toughness
  • Black and gold treatment for corrosion and wear resistance
  • Reduced 1/2 inch shank with a 3-flat design

Cons

  • Single bit, not a set
  • Light-duty machining only, at low speeds
  • No warranty term is stated
  • Listing advises starting large holes with a smaller hole first
Century Drill & Tool 11623 Letter Gauge Drill Bit

Century Drill & Tool 11623 Letter Gauge Drill Bit

Century Drill & Tool9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A letter W gauge bit in M2 high-speed steel whose title states a 135 degree split point and whose bullets state 118-degree points.

Pros

  • M2 high-speed steel in a letter W gauge size
  • 0.386 inch diameter with a 5-1/8 inch length
  • Split point named in the title for exact hole size for tapping
  • Maker promises replacement at no charge if the tool does not satisfy

Cons

  • Single bit for general purpose drilling, not a set
  • Replacement promise states no time term

Other welders and gear to compare

Side by side

uxcell Reduced Shank Bit ENERTWIST 230-Piece Kit Century Letter W Bit
Gear Score 58 59 52
Point angle 118° 118° 135° in title; 118° in bullets
Material 4241 high-speed steel High-speed steel, titanium coated M2 high-speed steel
Size 23/32 in cutting diameter 3/64 in to 1/2 in, 230 pieces 0.386 in diameter, letter W
Shank 1/2 in reduced 3-flat shank Not stated Not stated
Kit 1 bit 230-piece kit in a case 1 bit
Weight Not stated Not stated 0.14 lb (bullets), 0.02 lb (table)
Warranty Not stated Not stated Replacement if not satisfactory; no term stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 3 November 2026. No listing states a safety standard, and none states a warranty term. The Century listing disagrees with itself on point angle, as covered below.

118 vs 135 degree drill bit: point angle

On the 118 degree side, both listings agree: the uxcell bit states a 118 degree point tip for wood, plastic and soft metal, and the ENERTWIST kit states a conventional 118 degree tip across its range. On the 135 degree side, the Century listing does not agree with itself: its title states a 135 degree split point, while its bullets state precision ground 118-degree points. That disagreement means the Century example cannot settle the 135 degree side, and no winner can be called on point angle until the angle is confirmed. The carbide vs cobalt drill bits guide covers material choices separately.

Material and size

The uxcell bit is a single 4241 high-speed steel bit with a 23/32 inch cutting diameter and a 1/2 inch reduced 3-flat shank, with a flute length of 76 mm and a total length of 151 mm. The ENERTWIST kit is high-speed steel with a titanium coating, covering sizes from 3/64 inch to 1/2 inch in a tough plastic case. The Century bit is M2 high-speed steel in letter W gauge, with a 0.386 inch diameter and a 5-1/8 inch length. The listings state no shared hardness figure, so no material winner can be called from these listings alone.

Kit or single bit

The ENERTWIST kit suits a shop that needs many sizes, with 230 pieces indexed on a tray and a sponge cushion between the halves to keep bits from mixing. The uxcell bit suits one job at one size, with a reduced shank that fits a 1/2 inch chuck. The Century bit is also a single bit, sized for tapping work at letter W gauge.

What each listing leaves unclear

The Century listing leaves the most unclear: its point angle differs between title and bullets, and its weight differs between bullets and spec table. The uxcell listing states no weight and no warranty term. The ENERTWIST listing states a longer-life claim against conventional bits with an unclear multiple, and it gives the size range rather than individual bit dimensions. Treat every unclear figure as a question to confirm before buying, not as a win for either side.

Choose the 118 degree side if

  • You drill wood, plastic and soft metal, the materials both 118 listings name.
  • You want a full size range in one indexed case.
  • You want a single reduced-shank bit for one size.
  • You want listings that agree on the point angle.

Choose the 135 degree side if

  • You want a split point as the Century title states, and you confirm the angle before buying.
  • You need a letter W gauge size for tapping work.
  • You want M2 high-speed steel in a single bit.
  • A satisfaction replacement promise matters to you, even with no term stated.

FAQ for welders

Which point angle should I pick for wood and plastic?

The 118 degree listings state suitability for wood, plastic and soft metal, with the uxcell bit aimed at light-duty work at low speeds. The Century listing names general purpose drilling in wood, metal and plastic, but its point angle is unclear.

Is the Century bit a 135 degree bit?

Its title states a 135 degree split point, but its bullets state precision ground 118-degree points, so the listing leaves the angle unclear. Confirm the point angle with the seller before buying it for a 135 degree point.

What size range does the ENERTWIST kit cover?

The kit covers sizes from 3/64 inch to 1/2 inch, with 230 pieces in a tough plastic case with an indexed tray. The listing states the kit is not for use on concrete or masonry.

Do any of these bits state a warranty term?

No listing states a warranty term. The Century listing promises replacement at no charge if the tool does not satisfy, without stating a term.

Can I drill concrete with these bits?

No listing in this comparison lists concrete. The ENERTWIST listing states the kit is not for use on concrete or masonry.

Related: carbide vs cobalt drill bits, best cobalt drill bit set, titanium vs cobalt drill bits, and the metal fab tools hub.

Scoring, line by line

All three bits are scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing states a safety standard, so no safety points were given, and no listing states a warranty term, so no warranty points were given.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ENERTWIST 230-Piece Kit 9.6 29 20 22 n/a 0
uxcell Reduced Shank Bit 9.6 29 21 20 n/a 0
Century Letter W Bit 9.5 24 20 19 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

Before you drill. Check the point angle and shank size on arrival against the listing, since the Century listing disagrees with itself. Clamp the workpiece, start a large hole with a smaller pilot hole as the uxcell listing advises, and select a coolant at high speeds with high-speed steel bits as that listing advises.

More buying guides