Titanium vs Cobalt Drill Bits: Which Should You Buy? (2026)
Titanium vs cobalt drill bits: four sets compared, DEWALT and Makita titanium against Bosch and MACXCOIP cobalt, for general drilling and hard metals.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
DEWALT DW1341 14-Piece Titanium Nitride Speed Tip Drill BitView on Amazon - 2
amoolo Titanium Drill Bit SetView on Amazon - 3
19 Pcs HSS Titanium Twist Drill Bit SetView on Amazon - 4
60pcs Titanium Drill Bit SetView on Amazon - 5
Milwaukee 48-89-0011 14 Piece Titanium Drill Bit Set Brand:View on Amazon - 6
ZELCAN 10 Sizes Titanium Step Drill BitView on Amazon
Verdict: Choose titanium for general drilling in metal, wood and plastic; choose cobalt for hard and abrasive metals like stainless steel and cast iron. The DEWALT DW1354 is the general pick; the Bosch CO14B is the hard-metal pick. One caveat: the Makita titanium listing also claims cast iron and stainless steel, so do not treat the titanium/cobalt line as absolute; read the listing for the metal you drill most.
Titanium vs cobalt drill bits comes down to what the bit is made of versus what is on it. The titanium examples here are high-speed steel bits with a titanium nitride coating; the cobalt examples are M42 and M35 cobalt alloy steel bits. This comparison lines up two titanium sets (DEWALT DW1354, Makita B-65399) against two cobalt sets (Bosch CO14B, MACXCOIP M35) using only what the listings state.
Other welders and gear to compare
DEWALT DW1341 14-Piece Titanium Nitride Speed Tip Drill BitCheck price on Amazon
amoolo Titanium Drill Bit SetCheck price on Amazon
19 Pcs HSS Titanium Twist Drill Bit SetCheck price on Amazon
60pcs Titanium Drill Bit SetCheck price on Amazon
Milwaukee 48-89-0011 14 Piece Titanium Drill Bit Set Brand:Check price on Amazon
ZELCAN 10 Sizes Titanium Step Drill BitCheck price on Amazon
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.
Side by side
| Model | Side | Set | Range | Verdict |
|---|---|---|---|---|
| DEWALT DW1354 | Titanium | 14-piece | 1/16-1/2 in | General pick |
| Bosch CO14B | Cobalt | 14-piece | 1/16-1/2 in | Hard-metal pick |
| Makita B-65399 | Titanium | 14-piece | 1/16-1/2 in | Impact-driver pick |
| MACXCOIP M35 | Cobalt | 13-piece | 1/16-1/4 in | Small-range pick |
Ratings in this table are the makers’ own claims taken from each product page (21 October 2026).
Titanium vs cobalt drill bits: the sides
Titanium: coated HSS
The DEWALT DW1354 is a 14-piece set of titanium nitride coated bits from 1/16 in up to 1/2 in, with a patented PILOT POINT tip that the listing says delivers speed and clear, burr-free holes while reducing bit walking, and a patented web taper that increases rigidity to decrease breakage. The listing recommends it for metal, wood and plastic. The Makita B-65399 is a 14-piece titanium nitride set with a 1/4 in hex shank that is impact rated for impact drivers, and the listing says the coating lasts 2.5x longer than non-coated bits. It lists drilling in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel. Both are 135 degree point geometry: pilot point on the DEWALT, split point on the Makita.
Cobalt: alloyed steel
The Bosch CO14B is a 14-piece M42 cobalt set with an 8% cobalt alloy that the listing says delivers 10x life vs. standard bits, with a surface-hardened tip for hardened steel and high-heat resistance for extended high-temperature work. The listing targets stainless steel, cast iron, titanium, light-gauge metal and aluminum, with a 3-flat shank and a thick web-helix design for stability. The MACXCOIP is a 13-piece M35 cobalt HSS set from 1/16 to 1/4 in, with a 135 degree spear point tip that the listing says is self-centering and clears chips faster, targeting stainless steel, iron castings, copper, aluminum, plastics and wood. Both are 135 degree points; the Bosch is a split point, the MACXCOIP a spear point.
Titanium vs cobalt drill bits: material match
General work
For wood, plastic and general metal, the titanium examples fit: the DEWALT listing recommends metal, wood and plastic, and the Makita lists ferrous and non-ferrous metal, wood, plastic, cast iron and stainless steel. Note the wrinkle: the Makita titanium listing also claims cast iron and stainless steel, so the titanium-for-general and cobalt-for-hard split is the listings’ general positioning, not a hard rule.
Hard metals
For stainless steel, cast iron and hardened steel, the cobalt examples fit: the Bosch listing names stainless steel, cast iron, titanium and hardened surface work, and the MACXCOIP names stainless steel and iron castings. The Bosch 8% cobalt M42 alloy and the 10x life claim are the strongest hard-metal claims in the data. Both sides state life claims, but against different baselines: the Bosch claims 10x life vs. standard bits, and the Makita claims its TiN coating lasts 2.5x longer than non-coated bits. The baselines differ, so the two figures do not compare directly.
Heat
The heat claim belongs to the Bosch listing specifically: high-heat resistance and high-temperature applications, plus a surface-hardened tip for hardened steel. The MACXCOIP listing claims hardened-steel performance without a stated heat claim, and the titanium listings make no heat claims beyond normal drilling. Treat heat resistance as a Bosch-listing advantage, not a cobalt-wide rule.
Titanium vs cobalt drill bits: set details
Sizes and count
The DEWALT, Makita and Bosch are 14-piece sets; the MACXCOIP is 13 pieces. The DEWALT runs 1/16 in up to 1/2 in; the Bosch runs 1/16 to 1/2 in; the Makita runs 1/16 to 1/2 in; the MACXCOIP runs 1/16 to 1/4 in, the narrowest range. The Bosch 3-flute design differs from the 2-flute DEWALT, Makita and MACXCOIP, but the listing does not claim what the third flute buys you, so it stays a detail, not a win.
Shanks and drivers
The Makita 1/4 in hex shank is impact rated for impact drivers, the only impact claim here. The Bosch 3-flat shank resists chuck slip, the only anti-slip shank detail stated. The DEWALT and MACXCOIP are straight shank. The listings do not let one side win on shanks generally: the impact rating and the 3-flat detail are single-listing facts.
Warranty
The DEWALT carries the most generous stated term with its 30 Day Money Back Guarantee, though the Bosch also states a warranty covering product defects only; the Makita states no manufacturer warranty and the MACXCOIP states none.
Titanium vs cobalt drill bits: the gear
Four sets from the listings, ranked by score: the DEWALT DW1354 titanium (14-piece, TiN coated, 1/16 to 1/2 in, pilot point, 30 Day Money Back Guarantee) is the general pick; the Bosch CO14B cobalt (14-piece, M42 8% cobalt, 10x life claim, split point, 3-flat shank) is the hard-metal pick; the Makita B-65399 titanium (14-piece, TiN, 2.5x longer claim, 135 split point, impact rated) is the impact-driver pick; the MACXCOIP M35 cobalt (13-piece, 1/16 to 1/4 in, spear point) is the small-range pick.
[wgl_safety kind=”tool”]
FAQ for welders
Are titanium bits solid titanium?
No: the titanium examples here are high-speed steel bits with a titanium nitride coating. The cobalt examples are cobalt alloy steel through and through.
Which is better for stainless steel?
The listings back cobalt: the Bosch targets stainless steel and cast iron with an 8% cobalt M42 alloy, and the MACXCOIP targets stainless steel and iron castings.
Can I use these in an impact driver?
The Makita B-65399 is the only one the listings rate for impact drivers.
Which of these states a warranty?
The DEWALT carries a 30 Day Money Back Guarantee; the Bosch warranty covers product defects only; the Makita and MACXCOIP state no warranty.
More welding guides
Related: our best drill bits for cast iron and best drill bits for steel, plus best drill press for metalworking.




