Titanium vs Black Oxide Drill Bits: Which One Should You Buy?
The YKLP titanium sets and the Norseman black oxide set compared on sizes, shank, stated materials and what each listing leaves unclear.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Norseman 22903 1/16 in.9.6/10View on Amazon - 2
8 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm9.5/10View on Amazon - 3
16 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm9.4/10View on Amazon
Verdict. Pick the Norseman black oxide set for the wider size spread and the clearest listing here. Pick the smaller YKLP titanium set for metric sizes and a serrated center that drills sideways after the hole. Skip the larger YKLP titanium set until its listing explains what the extra pieces are, since its own bullets describe fewer bits.
A hole in thin sheet, a bracket on a frame, a slot widened in a plate: the bit has to match the metal and the hole. The question of titanium vs black oxide drill bits comes down to what each coating is stated to do, and the listings here give a plain way to compare the sides, size by size and claim by claim.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The sets
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | Norseman 22903 1/16 in. | 9.6/10 | Buy on Amazon |
| 2 | 8 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm | 9.5/10 | Buy on Amazon |
| 3 | 16 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm | 9.4/10 | Buy on Amazon |

Norseman 22903 1/16 in.
A 29-piece black oxide set in 1/16 in. to 1/2 in. sizes, with a self-centering point, a 3-flats shank and hi-molybdenum steel for sheet metal, hard steel, acrylics and brass.
Pros
- 29 sizes from 1/16 in. to 1/2 in., the widest size spread here
- 3-flats on the shank and a self-centering point
- Stated for hard steel, sheet metal, acrylics and brass
- Maker claims twice the life of a standard drill bit
Cons
- No warranty term is stated
- No case or storage is mentioned in the listing
- No point angle is stated, only self-centering
- No drill speed guidance is stated

8 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm
An 8-piece titanium-coated high-speed steel set in 3 to 10 mm sizes, with a 135 degree split point, a straight shank and a serrated center for sideways cutting.
Pros
- 8 sizes from 3 to 10 mm, including 6.5 mm
- 135 degree split point with a straight shank
- Serrated center lets the bit drill horizontally after the hole
- Long flutes for chip evacuation, per the listing
Cons
- No warranty term is stated
- Title mixes twist drill bit and spiral saw drill bit language
- No weight is stated
- No case or storage is mentioned in the listing

16 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm
A 16-piece titanium-coated high-speed steel set in the same 3 to 10 mm sizes as the 8-piece set, with a 135 degree split point and a serrated center, though its bullets describe 8 bits.
Pros
- 16 pieces in the title and spec table, same 3 to 10 mm size range
- 135 degree split point with a straight shank
- Serrated center for horizontal drilling after the hole
- Long flutes for chip evacuation, per the listing
Cons
- Bullets describe 8 bits while the title says 16 pieces, with no explanation of the other 8
- No warranty term is stated
- No weight is stated
- Title mixes twist drill bit and spiral saw drill bit language
Other welders and gear to compare
ZELCAN 10 Sizes Titanium Step Drill BitCheck price on Amazon
Makita B-65399 Impact Gold 14 Pc. Titanium Drill Bit SetCheck price on Amazon
BECOLLO 60pcs Titanium Drill Bit SetCheck price on Amazon
DEWALT Drill Bit SetCheck price on Amazon
amoolo Titanium Drill Bit SetCheck price on Amazon
DEWALT Titanium Nitride Drill Bit SetCheck price on Amazon
Side by side
| Norseman 22903 Black Oxide Drill Bit Set | YKLP 8-Piece Titanium Drill Bit Set | YKLP 16-Piece Titanium Drill Bit Set | |
|---|---|---|---|
| Gear Score | 58 | 55 | 51 |
| Coating | Black and gold oxide | Titanium coated | Titanium coated |
| Piece count | 29 | 8 | 16 in title, 8 in bullets |
| Size range | 1/16 in. to 1/2 in. | 3 to 10 mm | 3 to 10 mm |
| Point | Self-centering | 135 degree split point | 135 degree split point |
| Shank | 3-flats | Straight shank | Straight shank |
| Stated materials | Sheet metal, hard steel, acrylics, brass | Thin wood, MDF, plastic board, aluminum, thin iron sheet | Thin wood, MDF, plastic board, aluminum, thin iron sheet |
| Side cutting | Not stated | Serrated center, drills horizontally | Serrated center, drills horizontally |
| Weight | 0.15 pounds (spec table) | Not stated | Not stated |
| Warranty | Not stated | Not stated | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 9 November 2026. No listing here states a warranty term or a safety certification.
Coating and shank: titanium vs black oxide drill bits
The coating is the headline difference. The YKLP sets are high-speed steel with a titanium coating, and the maker says the coating keeps the edge sharper longer and extends the life of standard drill bits by 2 times. The Norseman set is hi-molybdenum steel with a black and gold oxide finish, and the maker says it lasts twice the life of a standard drill bit. Both sides claim the same multiple against a standard bit, so the listings give no basis for calling one coating longer lived than the other.
The shank is where the sides part company in a way a buyer can feel at the chuck. The Norseman bits have 3-flats on the shank, a shape that resists spinning in the chuck. The YKLP bits have a straight shank, paired with a 135 degree split point that resists walking at the start of the hole. Neither listing states a point angle for the Norseman set, so the point comparison stops there.
Sizes: metric against fractional
The Norseman set covers 29 sizes from 1/16 in. to 1/2 in. The YKLP sets cover 8 sizes from 3 to 10 mm: 3, 4, 5, 6, 6.5, 7, 8 and 10 mm. A buyer working in fractions gets a fuller spread from the Norseman set, while a buyer working in metric gets a compact range from either YKLP set. The 16-piece YKLP set lists the same 8 sizes as the 8-piece set, which is part of the count problem covered below.
What each side is stated to drill
The Norseman listing names sheet metal, hard steel, acrylics and brass, and adds enlarging existing holes. The YKLP listings name thin wood, solid wood, multilayer board, MDF, plastic board, aluminum, thin iron sheet and aluminum alloy, with the thin wood cutting put at 1 to 2 mm. The two sides aim at different work: the black oxide set at sheet metal and hard steel, the titanium sets at wood, board, plastic and metal. Neither listing states a thickness limit for metal beyond thin iron sheet on the YKLP side, so a buyer drilling plate has no stated figure to lean on.
Side cutting and the spiral saw wording
The YKLP listings carry a feature the Norseman listing does not: a serrated center that lets the bit keep drilling horizontally after the hole, for pulling a groove or cutting sideways. The same YKLP title also calls the bits a spiral saw drill bit, next to calling them twist drill bits, so the listing mixes two tool types in one title. Read as a twist drill bit set with a side-cutting serration, the description holds together; read as a saw, it does not match the twist drill sizes and shank the rest of the listing states.
The 16-piece listing problem
The 16-piece YKLP set matches the 8-piece set in nearly every line: same sizes, same point, same serrations, same stated materials. The title and the spec table say 16 pieces, while the bullets say the set contains 8 titanium-coated bits in the 8 listed sizes. The listing never says what the other 8 pieces are, whether the set holds 2 of each size or 8 pieces of another kind. Until that is cleared up, the 16-piece set sits last on that gap alone.
Choose the Norseman 22903 Black Oxide Drill Bit Set if
- You drill in fractions and want 29 sizes from 1/16 in. to 1/2 in.
- You drill sheet metal, hard steel, acrylics or brass.
- You want a 3-flats shank that resists spinning in the chuck.
Choose the YKLP 8-Piece Titanium Drill Bit Set if
- You drill in metric and want sizes from 3 to 10 mm.
- You need to cut sideways or pull a groove after the hole.
- You want a 135 degree split point with a straight shank.
Choose the YKLP 16-Piece Titanium Drill Bit Set if
- You want the same sizes and point as the 8-piece set with more pieces stated.
- You can confirm with the seller what the extra 8 pieces are before buying.
- You accept a listing that leaves the piece count unclear.
Before You Strike an Arc
- Check the shank fit in the chuck before drilling: the Norseman set has 3-flats shanks and the YKLP sets have straight shanks.
- Match the bit to the material the listing states: thin iron sheet and thin wood for the YKLP sets, sheet metal and hard steel for the Norseman set.
- Clear chips from the flutes as you drill so the bit does not bind in the hole.
- Count the pieces on arrival against the listing: 29 for the Norseman set, 8 for the YKLP 8-piece set and 16 for the YKLP 16-piece set.
FAQ for welders
Which coating lasts longer, titanium or black oxide?
Both makers claim the same multiple: the YKLP listing says the titanium coating extends the life of standard drill bits by 2 times, and the Norseman listing says its set lasts twice the life of a standard drill bit. Neither listing compares the two coatings against each other, so the listings here do not settle which coating lasts longer in the same material.
What sizes does the Norseman 29-piece set cover?
The listing names 29 sizes from 1/16 in. to 1/2 in. The smallest size is 1/16 in. and the largest is 1/2 in.
Can the YKLP bits cut sideways?
Yes, per the listing: the serrated center lets the bit keep drilling horizontally after the hole, for pulling a groove or cutting thin wood, board and plastic. The listing puts the thin wood cutting at 1 to 2 mm.
Does the 16-piece YKLP set hold 2 of each size?
The listing does not say. Its title and spec table say 16 pieces, while its bullets describe 8 bits in the 8 listed sizes, and nothing in the listing explains the other 8 pieces. Ask the seller before buying if the piece count matters to you.
Do any of these sets state a warranty?
No. None of the listings here states a warranty term, and none states a safety certification either. The scores here give no points for warranty or safety on that account.
Related: best drill bit set for wood and metal, best cobalt drill bit set, carbide vs cobalt drill bits, black oxide vs cobalt drill bits, and the metal fab tools hub.
Scoring, line by line
Each set is scored on performance, build, value, safety and warranty. How we pick explains the weights. No set here states a warranty term or a safety certification, so the safety and warranty parts of the score stay empty for the sets here, and the ranking turns on performance, build and value alone.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Norseman 22903 Black Oxide Drill Bit Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| YKLP 8-Piece Titanium Drill Bit Set | 9.5 | 28 | 20 | 19 | n/a | 0 |
| YKLP 16-Piece Titanium Drill Bit Set | 9.4 | 26 | 19 | 18 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




