Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bit Set for Impact Driver (2026): 4 Hex Shank Picks Compared

Four hex shank drill bit sets for an impact driver, from a 16-piece titanium set to a 140-piece combo kit, compared on size range, point, coating and case.

Best Drill Bit Set for Impact Driver (2026): 4 Hex Shank Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HIGHFIRE 22-PieceBest OverallHIGHFIRE 22-Piece9.5/10View on Amazon
  2. 2amoolo 16-PieceBest 16-Piece Setamoolo 16-Piece9.5/10View on Amazon
  3. 3CRAFTSMAN 140-PieceBiggest KitCRAFTSMAN 140-Piece9.4/10View on Amazon
  4. 4CRAFTSMAN 21-PieceCompact 21-Piece SetCRAFTSMAN 21-Piece9.4/10View on Amazon

A bracket that needs new holes, a hinge that has to move and a panel that needs a fresh fastener all ask the same thing from a drill: a bit that stays centered, cuts clean and swaps fast when the job changes. The best drill bit set for impact driver work pairs hex shank bits with a quick-change chuck, so a bit change takes moments and the shank holds under torque. This guide compares hex shank sets on what each listing states: size range, point, coating, shank fit and case.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall HIGHFIRE 22-Piece: The widest size range here, 1/16 to 1/2 inch, 22 pieces, a 135-degree split point and a titanium coating the maker says extends bit life 3 times longer. Check price on Amazon
  • Best 16-Piece Set amoolo 16-Piece: A 4341 HSS titanium set with a 135-degree split point, a press-in pin shank and 3 spare bits in 1/16, 5/64 and 3/32 inch. Check price on Amazon
  • Biggest Kit CRAFTSMAN 140-Piece: A 140-piece combo with 21 drill bits, 97 1 inch bit tips, 15 2 inch power bits, 5 nut drivers and a magnetic bit holder in one case. Check price on Amazon
  • Compact 21-Piece Set CRAFTSMAN 21-Piece: A titanium nitride 21-piece set with a 1/4 inch hex shank, a split point and shock-resistant screwdriving bits for wood, metal and plastic. Check price on Amazon

The machines

HIGHFIRE 22 Pieces Hex Shank Drill Bit Set

HIGHFIRE 22 Pieces Hex Shank Drill Bit Set

Highfire9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 22-piece hex shank set with the widest size range here, 1/16 to 1/2 inch, a 135-degree split point, a tapered web and a titanium coating.

Pros

  • Sizes run from 1/16 to 1/2 inch, the widest range in this guide
  • 135-degree split point for a no-walk start, per the listing
  • Tapered web design the maker states increases strength and reduces breakage
  • Titanium coating the maker says extends bit life 3 times longer

Cons

  • Ships in a double blister pack with no case or size index for storage
  • Only 1/16, 5/64, 3/32, 1/8 and 3/16 inch sizes have a spare; the rest appear once
  • No warranty term is stated
  • Listing states HSS but no steel grade number
amoolo Hex Shank Impact Drill Bit Set, 1/16"-1/4"

amoolo Hex Shank Impact Drill Bit Set, 1/16"-1/4"

amoolo9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-piece 4341 HSS titanium set, 1/16 to 1/4 inch, with a 135-degree split point, a press-in pin shank and a portable case with a size index.

Pros

  • 4341 HSS titanium steel with a 135-degree split point
  • Press-in pin connection joins bit and shank to resist snapping
  • 3 spare bits in 1/16, 5/64 and 3/32 inch
  • Portable case with a size index for easy selection and carry

Cons

  • Size range stops at 1/4 inch, so larger holes need another set
  • No screwdriver bits, nut drivers or accessories in the box
  • No warranty term is stated
  • The 3 spares cover only 1/16, 5/64 and 3/32 inch
CRAFTSMAN 140 Pc Impact Driver Bit Set, Steel

CRAFTSMAN 140 Pc Impact Driver Bit Set, Steel

CRAFTSMAN9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 140-piece combo kit with 21 drill bits, 97 1 inch bit tips, 15 2 inch power bits, 5 nut drivers, a socket adapter and a magnetic bit holder in a storage case.

Pros

  • 140 pieces cover drilling and driving in one case
  • 21 drill bits plus 97 1 inch bit tips and 15 2 inch power bits
  • CNC-machined tips for a precise fit that cuts cam-out
  • Shock-resistant tool steel with a black oxide coating

Cons

  • Drill bit sizes are not stated, so the range is unknown before buying
  • Only 21 of 140 pieces are drill bits
  • Case measures 16.81 x 8.9 x 2.56 inches, large for a small bench drawer
  • No spare drill bits in the stated contents
CRAFTSMAN Drill Bit Set/Screwdriver Set

CRAFTSMAN Drill Bit Set/Screwdriver Set

CRAFTSMAN9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21-piece titanium nitride set with a 1/4 inch hex shank, a split point for clean holes and shock-resistant screwdriving bits for wood, metal and plastic.

Pros

  • Titanium nitride coating for longer bit life, per the listing
  • Split point for precise placement and clean, burr-free holes
  • 1/4 inch hex shank fits impact drivers and 1/2 inch drill/drivers
  • Shock-resistant screwdriving bits for driving work

Cons

  • Drill bit sizes are not stated in the listing
  • Only 21 pieces, the smallest set here
  • No case or storage is stated in the listing
  • No stated split between drill bits and screwdriver bits in the 21 pieces

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Pieces Size range Point Coating Shank Case
HIGHFIRE 22-Piece 9.5/10 22 1/16 to 1/2 in 135-degree split point Titanium 1/4 in hex Double blister pack
amoolo 16-Piece 9.5/10 16 1/16 to 1/4 in 135-degree split point Titanium, 4341 HSS 1/4 in hex Portable case with size index
CRAFTSMAN 140-Piece 9.4/10 140 Not stated Not stated Black oxide Hex Storage case
CRAFTSMAN 21-Piece 9.4/10 21 Not stated Split point Titanium nitride 1/4 in hex Not stated

Ratings in this table are the makers’ own claims taken from each product page (19 November 2026).

Buying guide: the best drill bit set for impact driver use

Size range

The range decides which holes a set can drill without a second kit. The Highfire set spans 1/16 to 1/2 inch in 22 pieces, the widest span here, with spares in 1/16, 5/64, 3/32, 1/8 and 3/16 inch. The amoolo set covers 1/16 to 1/4 inch in 13 sizes plus 3 spares. The two CRAFTSMAN sets do not state drill bit sizes.

Split point and flute

A split point holds center without a pilot hole and starts without walking. The amoolo and Highfire sets both state a 135-degree split point, and the CRAFTSMAN 21-piece set states a split point without an angle. The Highfire listing also states a twist flute form that clears chips fast and cuts friction and heat. The CRAFTSMAN 140-piece set states CNC-machined tips for a precise fit in screw heads.

Hex shank and quick change

Every set here uses a hex shank made for quick-change impact driver chucks. The amoolo set adds a press-in pin that joins bit and shank into one structure to resist snapping at the drive. The Highfire listing states a solid shank connection that moves torque to the tip and a hex shank that resists spinning in the chuck under pressure. The CRAFTSMAN sets state industry-standard hex shanks that fit nearly all major brands.

Coating and material

Coating and steel decide how long a bit holds an edge. The amoolo set states 4341 HSS titanium steel, and the Highfire set states HSS twist bits with a titanium coating the maker says extends bit life 3 times longer. The CRAFTSMAN 21-piece set states a titanium nitride coating that promotes longer life, and the CRAFTSMAN 140-piece set states shock-resistant tool steel with a black oxide coating. None of the listings states a coating thickness.

Use as directed. Clamp the work to the bench before drilling, wear eye and face protection, keep gloves away from rotating parts and keep guards in place on the driver. See the OSHA machine guarding guidance and the Safety Disclaimer.

Before You Strike an Arc

  • Seat the hex shank fully in the quick-change chuck before drilling, so the bit cannot walk out under torque.
  • Check the case size index against the bit in hand, so the size grabbed matches the hole needed.
  • Clamp the work to the bench and keep hands clear of the bit while it spins.
  • Wear eye protection and keep loose gloves away from rotating parts.

For more options, see our metal fab tools guides.

FAQ for welders

What size drill bit set do I need for an impact driver?

Match the set to the holes the job needs. The Highfire set spans 1/16 to 1/2 inch, and the amoolo set covers 1/16 to 1/4 inch, so either suits small to medium holes in metal, wood and plastic. The two CRAFTSMAN sets do not state drill bit sizes.

Can I use hex shank drill bits in an impact driver?

Yes, hex shank bits are made for quick-change impact driver chucks. All four sets here use hex shanks, and the listings state they fit impact drivers and other tools that take hex shanks. The shank locks in the chuck, and the Highfire listing states a hex shank eliminates shank spinning in the chuck when using pressure.

What does a 135-degree split point do?

A split point holds center without a pilot hole and starts without walking across the surface. The amoolo and Highfire sets both state a 135-degree split point, and the CRAFTSMAN 21-piece set states a split point without giving an angle. A centered start keeps the hole where it was marked, and a walking bit leaves a scarred surface.

Do titanium drill bits last longer?

The makers here say so, in their own words. The Highfire listing states its titanium coating extends bit life 3 times longer, and the CRAFTSMAN 21-piece listing states its titanium nitride coating promotes longer life. The amoolo set states 4341 HSS titanium steel. None of the listings states a wear figure, so treat the coating as one factor beside size range and point.

Should I buy a drill-only set or a drill and drive combo?

It depends on whether the job also needs driving. The amoolo and Highfire sets are drill-only, with no screwdriver bits in the box. The CRAFTSMAN 140-piece set adds 97 1 inch bit tips, 15 2 inch power bits, 5 nut drivers and a magnetic bit holder, and the CRAFTSMAN 21-piece set pairs drill bits with shock-resistant screwdriving bits. A combo suits mixed drilling and driving.

Related: best drill bit set for hard steel, best step drill bit for stainless steel, best cutting oil for drilling metal, and the best drill chuck guide. Also see our best drill for tight spaces. Also see our best drill bit to drill through metal.

Scoring, line by line

Each set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Drill bit sets have no electrical safety listing to state, and no listing here states a warranty term, so every set scores zero on those two criteria; the ranking comes from the other three.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
HIGHFIRE 22-Piece 9.5 30 21 21 0 0
amoolo 16-Piece 9.5 29 21 20 0 0
CRAFTSMAN 140-Piece 9.4 28 20 21 0 0
CRAFTSMAN 21-Piece 9.4 27 20 19 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides