Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bit for Stainless Steel Metal (2026): 5 Cobalt Picks Compared

Five cobalt drill bit picks for stainless steel metal, compared on sizes, M35 steel, coating, point style and stated warranty.

Best Drill Bit for Stainless Steel Metal (2026): 5 Cobalt Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1toolant 21 Piece Cobalt Set ProBest Overalltoolant 21 Piece Cobalt Set Pro9.7/10View on Amazon
  2. 2amoolo 1/4 Inch Cobalt 10 PackBest 1/4 Inch Pack With Warrantyamoolo 1/4 Inch Cobalt 10 Pack9.6/10View on Amazon
  3. 3Yellow Paw 1/4 Inch Cobalt 3 PackBest TiAlN 1/4 Inch BitYellow Paw 1/4 Inch Cobalt 3 Pack9.6/10View on Amazon
  4. 4RCINDUS 1/4 Inch Cobalt 15 PackMost 1/4 Inch SparesRCINDUS 1/4 Inch Cobalt 15 Pack9.5/10View on Amazon

Stainless plate on the bench, a bracket to fit up, and a dull bit that skates across the surface instead of cutting will slow any fab job down. This guide compares cobalt picks for shop drilling and names the best drill bit for stainless steel metal on what each maker states: sizes in the pack, steel and coating, point style, case, and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall toolant 21 Piece Cobalt Set Pro: Widest size range here, 1/16 inch to 1/2 inch, with TiAlN coating, bullet point tips and a stated 90 days warranty. Check price on Amazon
  • Best 1/4 Inch Pack With Warranty amoolo 1/4 Inch Cobalt 10 Pack: 10 pieces at 1/4 inch in M35 steel with 5% cobalt, fully ground groove, 135 degree split point and a stated 90 days warranty. Check price on Amazon
  • Best TiAlN 1/4 Inch Bit Yellow Paw 1/4 Inch Cobalt 3 Pack: M35 steel with 5% cobalt and TiAlN coating, stated at 4 inches long for hardened steel up to 40 HRC. Check price on Amazon
  • Most 1/4 Inch Spares RCINDUS 1/4 Inch Cobalt 15 Pack: 15 pieces at 1/4 inch in M35 steel with 5% cobalt, with diameter accuracy stated as within -0.03mm. Check price on Amazon

The machines

toolant 21Pcs Cobalt Drill Bit Set (Pro)

toolant 21Pcs Cobalt Drill Bit Set (Pro)

toolant9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21 piece cobalt set from 1/16 inch to 1/2 inch with a TiAlN coating, bullet point tips and an index storage case, for varied hole sizes in stainless steel metal.

Pros

  • Covers 1/16 inch to 1/2 inch in one index storage case
  • TiAlN coating with stated surface hardness of 89HRC
  • Bullet point tip stated as self-centering to minimize wandering
  • Duplicates of small sizes from 1/16 inch through 1/8 inch

Cons

  • Only 1 bit each for sizes from 9/64 inch to 1/2 inch
  • Bullet point tip instead of a split point
  • Case dimensions stated as 7.01 by 4.06 by 1.97 inches
  • Single 1/4 inch bit, with no 1/4 inch spares in the set
amoolo 1/4" Cobalt Drill Bit 10 Pcs

amoolo 1/4" Cobalt Drill Bit 10 Pcs

amoolo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 1/4 inch M35 cobalt bits with 5% cobalt, a fully ground spiral groove and a 135 degree split point, for repeated 1/4 inch holes in stainless steel metal.

Pros

  • 10 pieces of 1/4 inch size for spares
  • M35 high speed steel with 5% cobalt
  • Fully ground spiral groove stated to clear particles and reduce friction and heat
  • 135 degree split point with straight shank, stated to prevent walking

Cons

  • Only 1/4 inch diameter, with no other sizes in the pack
  • No smaller pilot sizes for stepped holes
  • Flute length stated as 2-3/4 inches, with no longer bits in the pack
  • Straight shank only, with no other shank style in the pack
1/4 Inch Cobalt Drill Bit (3 Pack) for Metal

1/4 Inch Cobalt Drill Bit (3 Pack) for Metal

Yellow Paw9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 pack of 1/4 inch M35 cobalt bits with 5% cobalt and a TiAlN coating, stated at 4 inches long for hardened steel up to 40 HRC.

Pros

  • M35 steel with 5% cobalt and TiAlN coating
  • Stated for hardened steel up to 40 HRC
  • 4 inches long with 2-1/2 inch flute length
  • 135 degree split point stated as self-centering

Cons

  • Only 3 bits in the pack
  • Only 1/4 inch diameter, with no other sizes
  • No warranty term is stated
  • 1/4 inch shank, with no reduced shank option in the pack
KENDO M35 Cobalt Drill Bit Set for Metal

KENDO M35 Cobalt Drill Bit Set for Metal

Kendo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13 piece M35 cobalt set from 1/16 inch to 1/4 inch with 5% cobalt and a 135 degree split point, in a metal box with size index.

Pros

  • Sizes from 1/16 inch to 1/4 inch in a metal box with size index
  • M35 high speed steel with 5% cobalt
  • Thick web design stated to strengthen the core
  • 135 degree split point stated to reduce thrust

Cons

  • Largest size is 1/4 inch, with no larger bits in the set
  • 1 bit per size, with no spares in the set
  • Bronze steam surface treatment, not a TiAlN coating
  • Same point style across the set, with no bullet point option
RCINDUS (15PCS) 1/4" Cobalt Drill Bit

RCINDUS (15PCS) 1/4" Cobalt Drill Bit

RCINDUS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 pack of 1/4 inch M35 cobalt bits with 5% cobalt and a 135 degree split point, in a plastic storage case for repeated 1/4 inch holes.

Pros

  • 15 pieces of 1/4 inch size in a plastic storage case
  • M35 high speed steel with 5% cobalt
  • Diameter accuracy stated as within -0.03mm
  • 135 degree split point stated for automatic centering

Cons

  • Only 1/4 inch diameter, with no other sizes
  • No warranty term is stated
  • Plastic storage case, not a metal box
  • All 15 bits share the same diameter, with no pilot sizes

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Sizes Count Material / Coating Point Warranty
toolant 21 Piece Cobalt Set Pro 9.7/10 1/16 to 1/2 in 21 Cobalt, TiAlN coated Bullet point 90 days
amoolo 1/4 Inch Cobalt 10 Pack 9.6/10 1/4 in only 10 M35 HSS, 5% cobalt 135 degree split point 90 days
Yellow Paw 1/4 Inch Cobalt 3 Pack 9.6/10 1/4 in only 3 M35 HSS, 5% cobalt, TiAlN coated 135 degree split point None stated
Kendo M35 Cobalt 13 Piece Set 9.6/10 1/16 to 1/4 in 13 M35 HSS, 5% cobalt, bronze steam 135 degree split point None stated
RCINDUS 1/4 Inch Cobalt 15 Pack 9.5/10 1/4 in only 15 M35 HSS, 5% cobalt 135 degree split point None stated

Specifications are manufacturer rated, as stated by each maker and collected 19 November 2026.

Buying guide: choosing the best drill bit for stainless steel metal

Cobalt steel and coating

Amoolo, Yellow Paw, Kendo and RCINDUS state M35 high speed steel with 5% cobalt. Toolant states cobalt steel with a TiAlN coating and a surface hardness of 89HRC, without stating a cobalt share. Yellow Paw also states a TiAlN coating, for hardened steel up to 40 HRC. Kendo states a bronze steam surface treatment.

Sizes in the pack and spares

The toolant set covers 1/16 inch to 1/2 inch, with duplicates from 1/16 inch through 1/8 inch. The Kendo set covers 1/16 inch to 1/4 inch, with 1 bit per size. The other picks are 1/4 inch only: 10 pieces from amoolo, 3 from Yellow Paw and 15 from RCINDUS. Sets suit varied sizes; single-size packs suit repeated 1/4 inch holes. See our best drill bit set for hard steel guide.

Point style and shank

Amoolo, Yellow Paw, Kendo and RCINDUS state a 135 degree split point, in self-centering terms about preventing walking or reducing thrust. Toolant states a bullet point tip, stated as self-centering to minimize wandering. Amoolo states a straight shank; Yellow Paw states a 1/4 inch shank with a rounded end. Check the shank against your chuck before you order.

Length, case and storage

Yellow Paw states 4 inches long with a flute length of 2-1/2 inches. Amoolo states a flute length of 2-3/4 inches (69.85mm) and a diameter of 6.35mm. RCINDUS states a diameter of 6.35mm and accuracy within -0.03mm, in a plastic storage case. Toolant states case dimensions of 7.01 by 4.06 by 1.97 inches; Kendo states 5.71 by 3.39 by 0.71 inches in a metal box with size index.

Warranty as stated

Amoolo and toolant state 90 days, each with refund or replacement wording. Yellow Paw, Kendo and RCINDUS state no warranty term here. Kendo states refund or replacement wording without a term in days, months or years, so it scores zero on warranty. Compare the warranty line in the table with each card.

Use as directed. Clamp the work before you drill, wear eye protection, keep gloves and loose clothing away from rotating parts, and keep guards in place where your drill has them. Follow the drill maker instructions for speed and feed for stainless steel, and stop if the bit wanders or the work shifts. See our drill press safety guide for setup checks.

Before You Strike an Arc

  • Check the shank style stated for your pick against your chuck, including the straight shank stated for amoolo and the 1/4 inch shank stated for Yellow Paw.
  • Count the sizes in the case on arrival against the sizes stated for that pick, and keep small sizes in their index slots.
  • Clamp stainless plate flat before you start a hole, and mark hole centers so a split point or bullet point starts where you intend.
  • Keep cutting fluid and a brush at the bench for stainless work, and clear chips with the drill stopped.

FAQ for welders

What does M35 cobalt mean in these picks?

M35 here means M35 high speed steel with 5% cobalt where stated. Amoolo, Yellow Paw, Kendo and RCINDUS state 5% cobalt. Toolant states cobalt steel with a TiAlN coating, without stating a cobalt share.

Is a 135 degree split point stated for stainless steel here?

Amoolo, Yellow Paw, Kendo and RCINDUS state a 135 degree split point for stainless steel, in self-centering terms about preventing walking or reducing thrust. Toolant states a bullet point tip instead, stated as self-centering to minimize wandering.

Should I buy a set or a single-size pack?

Buy a set for varied sizes: toolant covers 1/16 inch to 1/2 inch, and Kendo covers 1/16 inch to 1/4 inch. Buy a single-size pack for repeated 1/4 inch holes, with 3, 10 or 15 pieces here.

What does the TiAlN coating add in these picks?

Yellow Paw states that its TiAlN coating helps keep the bit cooler, which helps durability and sharpness. Toolant states a TiAlN coating with a surface hardness of 89HRC. The other picks state no TiAlN coating.

What warranty do these picks state?

Amoolo and toolant state 90 days, with refund or replacement wording. Yellow Paw, Kendo and RCINDUS state no warranty term here. Check the warranty line in the table and on each card.

Related: best drill bits for drilling stainless steel, best step drill bit for stainless steel, best cutting fluid for stainless steel, and best cobalt drill bit set.

Scoring, line by line

Each pick is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Drill bits have no electrical safety listing to state, so every pick here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
toolant 21 Piece Cobalt Set Pro 9.7 32 22 21 n/a 2
amoolo 1/4 Inch Cobalt 10 Pack 9.6 29 21 21 n/a 2
Yellow Paw 1/4 Inch Cobalt 3 Pack 9.6 30 21 20 n/a 0
Kendo M35 Cobalt 13 Piece Set 9.6 28 20 20 n/a 0
RCINDUS 1/4 Inch Cobalt 15 Pack 9.5 27 19 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides