Best Countersink Bit for Stainless Steel (2026)
Five countersink bits and sets for stainless steel, compared on material, flutes, angle, size range, shank and kit contents.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJNB Pro 5-Pc Set9.7/10View on Amazon - 2
Best 6-Piece SetMatework M35 6-Pc Set9.7/10View on Amazon - 3
Best Combo SetTHINKWORK 10-Pc Set9.6/10View on Amazon - 4
Best Single BitCONQUER 5-Flute Bit9.5/10View on Amazon
A stainless bracket with screw heads sitting proud will catch every rag and every hand that brushes past it. The fix is a clean countersink that lets the screw sit flush, and choosing the right cutter for hard stainless is the whole job. This guide covers the best countersink bit for stainless steel: five bits and sets, ranked on material, flutes, angle, size range and shank.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall JNB Pro 5-Pc Set: M35 HSS with 5% cobalt, 5 flutes, an 82 degree angle and 5 sizes for stainless work. Check price on Amazon
- Best 6-Piece Set Matework M35 6-Pc Set: M35 cobalt, 5 flutes, an 82 degree tip, 6 sizes and a storage case. Check price on Amazon
- Best Combo Set THINKWORK 10-Pc Set: Step bits and countersinks in one 10-piece HSS set with a TiN coating and a case. Check price on Amazon
- Best Single Bit CONQUER 5-Flute Bit: One 5-flute bit covering 1/8 in to 3/4 in on a quick-change hex shank. Check price on Amazon
The machines

5PC Countersink Bits for Steel
A 5-piece M35 HSS countersink set with 5% cobalt, a 5-flute design, an 82 degree angle and sizes from 1/4 in to 3/4 in on a 1/4 in round shank.
Pros
- M35 HSS with 5% cobalt, stated for hard metals including stainless steel
- 5-flute design stated for smooth, clean countersinks
- 82 degree angle with 5 SAE diameters from 1/4 in to 3/4 in
- Listing states use without coolant and clean chips with no chatter
Cons
- No warranty term stated
- No safety certification stated
- No storage case stated in the listing
- Round shank, not a quick-change hex shank

6Pcs Countersink Drill Bit Set
A 6-piece M35 cobalt countersink set with a 5-flute design, an 82 degree tip, a 1/4 in hex shank and a storage case.
Pros
- M35 cobalt high-speed steel with a cobalt coating stated
- 5-flute design stated for stability and debris discharge
- 6 sizes including a 5/16 in special size
- Storage case and laser-engraved sizes stated
Cons
- No warranty term stated
- No safety certification stated
- Customer service note is not a warranty term
- Hex shank only, no round shank option stated

6Pcs Countersink Drill Bit Set
A 6-piece M2 cobalt countersink set with a 5-flute design, an 82 degree tip, a 1/4 in hex shank and a storage case.
Pros
- M2 cobalt high-speed steel with a cobalt coating stated
- 5-flute design stated for stability and debris discharge
- 6 sizes including a 5/16 in special size
- Storage case and laser-engraved sizes stated
Cons
- No warranty term stated
- No safety certification stated

THINKWORK 10Pcs Step Drill Bit & Countersink Set
A 10-piece step drill and countersink set in HSS with a TiN coating, 5 step bits and 5 countersink bits, and 1/4 in and 3/8 in shanks.
Pros
- 10 pieces: 5 step bits plus 5 countersink bits
- HSS with a TiN coating and a 4-flute spiral design
- Countersink sizes from 1/4 in to 3/4 in stated
- Storage case and laser-engraved step sizes stated
Cons
- Countersinks are part of a combo set, not a dedicated set
- No warranty term stated
- No safety certification stated

CONQUER 5 Flute Metal Countersink Drill Bit
A single 5-flute alloy steel countersink and deburring bit with a 1/4 in hex shank, covering holes from 1/8 in to 3/4 in.
Pros
- Single bit covers 1/8 in to 3/4 in, 3 mm to 19 mm
- 5-flute edge stated for burr removal and chamfering
- 1/4 in quick-change hex shank stated
- Stated for stainless steel, mild steel, copper, brass and plastic
Cons
- Alloy steel, not a cobalt high-speed steel
- Single bit only, no set of fixed diameters
- No warranty term stated
Other welders and gear to compare
Cobalt Steel Single End Countersink Drill Bit with CobaltCheck price on Amazon
Countersink Drill Bit SetCheck price on Amazon
NEIKO 10181A Step Drill Bit SetCheck price on Amazon
NordWolf 5-Piece M35 Cobalt Stubby Drill Bit SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Material | Flutes | Angle | Sizes | Shank | Warranty |
|---|---|---|---|---|---|---|---|
| JNB Pro 5-Pc Set | 9.7/10 | M35 HSS, 5% cobalt | 5 | 82 degrees | 1/4 to 3/4 in | 1/4 in round | Not stated |
| Matework M35 6-Pc Set | 9.7/10 | M35 cobalt | 5 | 82 degrees | 1/4 to 3/4 in, plus 5/16 in | 1/4 in hex | Not stated |
| Matework M2 6-Pc Set | 9.6/10 | M2 cobalt | 5 | 82 degrees | 1/4 to 3/4 in, plus 5/16 in | 1/4 in hex | Not stated |
| THINKWORK 10-Pc Set | 9.6/10 | HSS, TiN coating | 4 | 118 degrees | 1/4 to 3/4 in | 1/4 and 3/8 in straight | Not stated |
| CONQUER 5-Flute Bit | 9.5/10 | Alloy steel | 5 | 87 degrees | 1/8 to 3/4 in | 1/4 in hex | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 28 October 2026. Where a listing contradicts itself, both figures are shown.
Buying guide: best countersink bit for stainless steel
Cobalt grade first
Stainless work favors the cobalt sets here. The JNB Pro set states M35 HSS with 5% cobalt, and the Matework M35 set states M35 cobalt high-speed steel with a cobalt coating, while the second Matework set states M2 cobalt high-speed steel. The THINKWORK set states high-speed steel with a titanium nitride coating, and the CONQUER bit states alloy steel. Listings for the cobalt sets name stainless steel and other hard metals directly, which is the strongest match for this use case.
Flutes and chatter
Four picks here state a 5-flute design, and the THINKWORK set states a 4-flute spiral design. The JNB Pro listing states clean chips with no chatter and use without coolant, and the Matework listings state stability during cutting and efficient debris discharge from their 5-flute design. Flute count is not the whole story, but the listings that talk about chatter and debris all point to the 5-flute shape.
Angle match
Angle decides whether the screw head sits flush. The JNB Pro set and both Matework sets state an 82 degree angle, the angle stated across the cobalt picks here. The THINKWORK set states a 118 degree cutting angle for the set as a whole, and the CONQUER bit states 87 degrees in its title while its spec table states 90 degrees. Match the bit angle to the screw head in hand before cutting, since a mismatched angle leaves a ring or a proud edge.
Size range and shank
Most sets here run the same five diameters: 1/4 in, 3/8 in, 1/2 in, 5/8 in and 3/4 in. Both Matework sets add a 5/16 in special size, and the single CONQUER bit covers holes from 1/8 in to 3/4 in, 3 mm to 19 mm, in one cutter. Shanks differ too: a 1/4 in round shank on the JNB Pro set, 1/4 in hex shanks on both Matework sets and the CONQUER bit, and straight shanks of 1/4 in and 3/8 in on the THINKWORK set. Check the shank against the drill in hand, since a hex shank swaps quickest in a quick-change chuck.
Before You Strike an Arc
- Match the bit angle to the screw head: 82 degrees on the cobalt sets here, 87 degrees in the CONQUER title.
- Check the shank against the drill chuck: hex shanks on three picks, a 1/4 in round shank on the JNB Pro set, straight shanks on the THINKWORK set.
- Pick the size from the screw head, not the hole: sizes run 1/4 in to 3/4 in across the sets here, plus a 5/16 in size on the Matework sets.
- Check the set on arrival: count the pieces against the listing, 5, 6 or 10 here, and confirm the case is in the box where the listing states one.
FAQ for welders
What angle countersink bit works for stainless steel?
The cobalt sets here state an 82 degree angle, and that is the angle to match against the screw head in hand. The CONQUER bit states 87 degrees in its title, so it suits a different screw head profile. Angle matters more than brand: a mismatched angle leaves the screw sitting proud or leaves a ring around the head.
Do I need a cobalt bit for stainless steel?
Cobalt is the strongest match in this group. The JNB Pro set states M35 HSS with 5% cobalt, and the Matework sets state M35 and M2 cobalt high-speed steel, with listings that name stainless steel and other hard metals. The HSS set with a titanium nitride coating and the alloy steel bit also list stainless steel among their materials, so cobalt is a preference for hard metal work, not the only option stated here.
Can one countersink bit cover every screw size?
One bit can cover a range, but not every fixed diameter. The single CONQUER bit covers holes from 1/8 in to 3/4 in, 3 mm to 19 mm, in one cutter. The sets give fixed diameters instead, 1/4 in to 3/4 in, with the Matework sets adding a 5/16 in size. Fixed diameters give a cleaner seat for one screw size, while the single bit trades that for range.
What shank fits a handheld drill?
All five picks here are stated for handheld or stationary drills. The JNB Pro listing names stationary or hand drill use, the CONQUER listing states a 1/4 in quick-change hex shank for handheld drills and drill presses, and the Matework sets state 1/4 in hex shanks. The THINKWORK set states straight shanks of 1/4 in and 3/8 in. Pick the shank that matches the chuck in hand.
Why does a countersink chatter in stainless?
The listings here point to flute design and debris clearing. The JNB Pro listing states clean chips with no chatter from its 5-flute design and use without coolant, and the Matework listings state stability during cutting and efficient debris discharge. A dull edge or a clogged flute leaves a rough seat, so the listings that discuss chatter all come back to flute shape and chip clearing.
Related: the best drill bits for steel, the best step drill bit for sheet metal, the best jigsaw blade for stainless steel and our metal fab tools hub.
Scoring, line by line
Each bit is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states a safety certification, so every bit here scores zero on that criterion, and no listing states a warranty term, so warranty scores zero across the group. The ranking comes from material, flutes, angle, size range and kit contents.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JNB Pro 5-Pc Set | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Matework M35 6-Pc Set | 9.7 | 30 | 22 | 21 | n/a | 0 |
| Matework M2 6-Pc Set | 9.6 | 29 | 21 | 21 | n/a | 0 |
| THINKWORK 10-Pc Set | 9.6 | 28 | 20 | 21 | n/a | 0 |
| CONQUER 5-Flute Bit | 9.5 | 27 | 19 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




