Air Hammer Bit Types and What Each One Does
Air hammer bit types cover chisels, punches, cutters and hammer bits, and this guide explains what each one does and scores 4 sets for the shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
9pcs Air Hammer Chisel Set9.7/10View on Amazon - 2
Air Hammer Bits Set, Pneumatic Air Hammer Chisel9.6/10View on Amazon - 3
Astro Tools 401K6 6-Piece Heavy Duty THOR Air9.6/10View on Amazon - 4
Astro Tools 401K3 3-Piece Heavy Duty THOR Air9.6/10View on Amazon
A rivet that will not move, a weld bead that needs chipping, a tile floor that has to come up: the air hammer does the work, and the bit decides what the work is. Air hammer bit types are chisels, punches, cutters and hammer bits, each shaped for one job. A chisel cuts and splits, a punch drives rivets out, a cutter trims, and a hammer bit does the hammering. This guide explains what each one does, which shank fits, and how the sets in this guide compare.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

9pcs Air Hammer Chisel Set
A 9-piece set with a standard 0.401 inch shank and a canvas pouch, for rivet removal, tile work and weld bead cleanup.
Pros
- Standard 0.401 inch shank fits most air hammers
- Canvas pouch with a slot for each bit
- Heat-treated alloy steel for regular workshop use
- 9 pieces cover rivet removal, tile, masonry and rust removal
Cons
- No warranty term is stated
- Canvas pouch, not a hard case
- No bit lengths are stated
- 0.401 inch shank fits most air hammers, not all of them

Air Hammer Bits Set, Pneumatic Air Hammer Chisel
A 9-piece set of hardened carbon-steel bits for demolition, rust removal and chiseling weld spots, sized for most standard pneumatic hammers.
Pros
- 9 different shapes for many jobs
- Hardened carbon steel, heat treated to hold shape
- Fits most standard pneumatic hammers
- Covers masonry, concrete, rust removal and weld spots
Cons
- No shank size is stated
- No storage pouch is stated
- No warranty term is stated
- No bit lengths are stated

Astro Tools 401K6 6-Piece Heavy Duty THOR Air
A 6-piece set with 2 cold chisels, 3 cutters and a 1 inch hammer bit for cutting, trimming and hammering on high power air hammers.
Pros
- 2 cold chisels, 3 cutters and a 1 inch hammer bit in one set
- THOR alloy with a harder surface and high toughness
- Hardened bits for high power air hammers
- 7 inch long, 1 inch diameter hammer bit for heavy blows
Cons
- Only 6 pieces, fewer than the 9-piece sets
- No storage pouch or case is stated
- No punch or tile bit in the set
- Only 1 hammer bit, so no spare hammer shape

Astro Tools 401K3 3-Piece Heavy Duty THOR Air
A 3-piece set of 1 inch hammering bits in 4, 7 and 12 inch lengths for hammering on high power air hammers.
Pros
- 3 hammering bits in 4, 7 and 12 inch lengths
- THOR alloy with a harder surface and high toughness
- Hardened bits for high power air hammers
- 1 inch diameter bits for hammering work
Cons
- Only 3 pieces, all hammering bits
- No chisel or cutter in the set
- No storage pouch or case is stated
- 1 inch diameter on all 3 bits, so no narrower tip is included
The types in one paragraph
These shapes cover most air hammer work. A cold chisel cuts, splits and chips weld spots. A punch drives rivets out. A cutter cuts metal and trims edges. A hammer bit does the hammering, with a 1 inch face on the Astro sets. A chipping bit breaks tile, masonry and concrete. The sets in this guide mix these shapes: the ZMCYNG and Firecore sets hold 9 pieces each, the Astro 401K6 holds 6, and the Astro 401K3 holds 3 hammering bits.
Side by side
| Bit Set | Gear Score | Pieces | Shank | Material |
|---|---|---|---|---|
| Firecore 9-Piece Set | 9.7/10 | 9 | 0.401 in | Heat-treated alloy steel |
| ZMCYNG 9-Piece Set | 9.6/10 | 9 | Not stated | Hardened carbon steel |
| Astro 401K6 6-Piece | 9.6/10 | 6 | 0.401 in | THOR alloy |
| Astro 401K3 3-Piece | 9.6/10 | 3 | 0.401 in | THOR alloy |
The shank decides fit: the Firecore set and the Astro sets state a 0.401 inch shank, which fits most air hammers. The ZMCYNG set states no shank size. The table above compares the sets by pieces, shank and material.
Chisels: cut, split and chip
The cold chisel is the cutting bit. The Astro 401K6 includes 2 cold chisels, and the ZMCYNG set lists chiseling and removing weld spots among its uses. The Firecore set lists chiseling wood and cleaning up weld beads. A chisel edge cuts sheet, splits rusted parts and chips slag and scale off a bead. Keep the edge square to the work and let the hammer do the cutting.
Punches and hammer bits: drive and peen
The punch and the hammer bit move metal instead of cutting it. The Firecore set lists rivet removal, and the ZMCYNG set lists riveting among its uses. The Astro 401K3 is 3 hammering bits only, in 4, 7 and 12 inch lengths, all 1 inch in diameter. The Astro 401K6 adds a 7 inch long, 1 inch diameter hammer bit beside its chisels and cutters. Use the punch for rivets, and the hammer bit where a flat blow spreads the force.
Cutters: trim and shape
The cutter is the shaping bit. The Astro 401K6 includes 3 cutters beside its 2 cold chisels and hammer bit. The ZMCYNG set lists metal cutting among its uses, and the Firecore set lists metal cutting and surface preparation. A cutter trims an edge, opens a slot and cleans a cut. Swap to a chisel when the job needs a straight split instead of a trim.
Shank fit: the 0.401 inch standard
Shank size decides whether a bit fits the hammer. The Firecore set and the Astro sets state a standard 0.401 inch shank, which fits most air hammers. The ZMCYNG set states no shank size, so measure the hammer’s retainer before ordering. A bit that fits loosely will chatter and wear the retainer, so check the lock before each use.
Air hammer bit types: the sets
The sets below cover the types above: chisels for cutting and weld spots, punches for rivets, cutters for trimming, and hammer bits for driving.
How to pick a set
Count the jobs first. The Firecore 9-piece set covers chiseling, rivet removal, tile, masonry and rust removal in one set, and it adds a canvas pouch with a slot for each bit. A 6-piece set like the Astro 401K6 suits a shop that cuts and hammers and wants the THOR alloy. A 3-piece hammer set suits a shop that hammers only. Match the shank to the hammer, and check the warranty: the Astro sets state a manufacturer warranty with no stated term, and the ZMCYNG and Firecore sets state no warranty term.
Chips and noise. Chiseling throws chips and an air hammer is loud. Wear safety glasses and hearing protection, clamp the work before you strike, and keep hands clear of the bit. See our air hammer uses guide for the tool itself.
FAQ for welders
What shank size do air hammer bits use?
The 0.401 inch shank is the standard here: the Firecore set and the Astro sets state a 0.401 inch shank. The ZMCYNG set states no shank size, so check the fit before ordering. A 0.401 inch shank fits most air hammers, per the Firecore listing.
What is a cold chisel bit for?
Cutting and splitting metal, and chipping weld spots and slag. The Astro 401K6 includes 2 cold chisels, and the ZMCYNG set lists chiseling and removing weld spots. Keep the edge square to the work and let the hammer do the cutting.
Can an air hammer bit remove rivets?
Yes, with a punch. The Firecore set lists rivet removal among its uses, and the ZMCYNG set lists riveting. Drive the rivet out with the punch, and keep the work clamped so it cannot move.
What is the difference between a chisel and a cutter bit?
A chisel cuts and splits with a straight edge, while a cutter trims and shapes. The Astro 401K6 includes 2 cold chisels and 3 cutters. Use the chisel for a straight split and the cutter for a trim.
How many bits do I need?
It depends on the jobs. The Firecore 9-piece set covers chiseling, rivet removal, tile, masonry and rust removal, while the Astro 401K3 covers hammering only with 3 bits. Start with the set that matches the jobs on the bench.
Related: air hammer uses, best heavy duty air hammer, what is pneumatic tool oil, and the metal fab tools hub. Also see our best pneumatic air hammer under 150.




