Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Air Hammer Parts: Bits, Retainers and Seals

Air hammer parts are the bits, retainers, seals and springs that keep a pneumatic hammer working, and a fix starts with naming the worn part before ordering anything.

Air Hammer Parts: Bits, Retainers and Seals
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Mayhew Tools 32025 Pneumatic Hammer, 4-Piece SetMayhew Tools 32025 Pneumatic Hammer, 4-Piece Set9.8/10View on Amazon
  2. 22 Pack 14" Air Hammer Bits Attachments,0.401 Inch2 Pack 14" Air Hammer Bits Attachments,0.401 Inch9.6/10View on Amazon
  3. 331982 Pneumatic Hammer 4 in. Smoothing Air Hammer31982 Pneumatic Hammer 4 in. Smoothing Air Hammer9.5/10View on Amazon

A chisel bit that will not stay in the retainer, a hammer that leaks air at the seals, a punch that has gone soft at the tip. Air hammer parts are the bits, retainers, seals and springs that keep a pneumatic hammer working, and a fix starts with naming the worn part before ordering anything.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Mayhew Tools 32025 Pneumatic Hammer, 4-Piece Set

Mayhew Tools 32025 Pneumatic Hammer, 4-Piece Set

Mayhew9.8/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece set of .401 turn type shank bits in hardened shock resistant tool steel, with an unlimited lifetime warranty.

Pros

  • Standard .401 turn type Parker shanks fit common air hammers
  • Fully hardened and tempered shock resistant tool steel
  • Black oxide finish to prevent corrosion
  • Unlimited lifetime warranty, made in the USA

Cons

  • A 4-piece set is more than a shop needs for a worn bit swap
  • Turn type shank only, so check your hammer takes a turn type retainer
  • No retainer, seals or springs in the box, so worn parts need separate orders
  • Bits alone do not fix a hammer that has lost air power or leaks at the seals
2 Pack 14" Air Hammer Bits Attachments,0.401 Inch

2 Pack 14" Air Hammer Bits Attachments,0.401 Inch

Zepkouel9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two 14 inch Cr-Mo bits, a pointed chisel and a 3/4 inch flat chisel, in the standard 0.401 inch shank.

Pros

  • Two 14 inch bits, a pointed chisel and a 3/4 inch flat chisel
  • Standard 0.401 inch shank fits ordinary air hammers
  • 42Cr-Mo alloy steel with heat treatment for hardness and wear resistance
  • Black oxide surface treatment for rust resistance

Cons

  • Pointed and flat shapes only, so other shapes need separate bits
  • 14 inch bits are long, so they do not suit tight spaces
  • No retainer or seals in the pack
  • No warranty term is stated
31982 Pneumatic Hammer 4 in. Smoothing Air Hammer

31982 Pneumatic Hammer 4 in. Smoothing Air Hammer

Sialvnd9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-inch smoothing bit for metal surface finishing, in a pack of 2 pieces with a universal type fit.

Pros

  • 4-inch smoothing bit for metal surface finishing work
  • Universal type fit with a handle diameter of about 10 mm
  • Steel build for strength and wear
  • Pack holds 2 pieces, so a spare is on hand

Cons

  • Smoothing bit only, so cutting and chiseling need a different bit
  • 4-inch face suits finishing, not deep gouging
  • No retainer or seals in the pack
  • No warranty term is stated

What wears out on an air hammer

An air hammer is a simple tool, and the parts that wear are the ones that move or seal. The bit takes the impact, the retainer holds the bit in the barrel, and the seals hold air pressure where it belongs. When the bit slips, the hammer loses power, or air leaks at the nose, start with those parts.

Air hammer parts: bits, retainers and seals

Bits do the cutting, chiseling and smoothing. Retainers lock the bit shank into the barrel so the bit stays put under impact. Seals keep compressed air inside the hammer, and springs cushion the retainer and the bit. A bit that fits the wrong shank will not seat, and a seal that has hardened will leak no matter how new the bit is.

The bits side by side

Mayhew 32025 Zepkouel 14 in Sialvnd 31982
Bits 4-piece set 2 pieces, 14 in 2 pieces, 4 in smoothing
Shank Standard .401 turn type Standard 0.401 in Universal type, about 10 mm
Steel Hardened shock resistant tool steel 42Cr-Mo alloy steel Steel
Finish Black oxide Black oxide Not stated
Warranty Unlimited lifetime Not stated Not stated

The bit sets below differ in shank, length and steel. The Mayhew set covers the standard .401 turn type shank with a lifetime warranty, the Zepkouel set gives long 14 inch bits for reach, and the Sialvnd bit (on Amazon) handles smoothing and finishing work. See our air hammer bit types guide for what each bit shape does.

How to match a bit to your hammer

Match the shank first. The Mayhew and Zepkouel bits here use a standard 0.401 inch shank, and the Mayhew set uses a .401 turn type Parker shank. A turn type shank fits a retainer that locks with a twist, so check the retainer on your hammer before ordering. The Sialvnd smoothing bit lists a universal type fit with a handle diameter of about 10 mm. Then match the bit shape to the job: a pointed chisel for cutting and slotting, a flat chisel for chipping and rust removal, and a smoothing bit for finishing a metal surface.

  • Shank. The Mayhew and Zepkouel bits use a standard 0.401 inch shank, which fits ordinary air hammers. The Mayhew set uses a .401 turn type Parker shank, so check that your retainer takes a turn type shank.
  • Length. The Zepkouel bits are 14 inch long, which reaches into deep spots and stays clear of the work, while the Sialvnd smoothing bit is 4 inch for surface work.
  • Steel. The Mayhew bits are fully hardened and tempered shock resistant tool steel. The Zepkouel bits are 42Cr-Mo alloy steel with heat treatment for hardness, toughness, impact resistance and wear resistance.

Bits that fit your hammer

These bits handle the cutting, slotting and smoothing steps above: sets in the standard 0.401 inch shank and a smoothing bit in a universal type fit.

Safety gear and shop checks

Air hammers throw chips and make noise. Wear eye and hearing protection, gloves and a jacket, and clamp the work before you pull the trigger. Check the air line and fittings for leaks, and keep the bit retainer locked before each use. Follow the safety notes in your hammer manual.

FAQ for welders

What size shank does an air hammer bit need?

Match the shank your hammer takes. The Mayhew and Zepkouel bits here use a standard 0.401 inch shank, and the Mayhew set uses a .401 turn type Parker shank. The Sialvnd smoothing bit lists a universal type fit with a handle diameter of about 10 mm. Check the retainer on your hammer before ordering.

What is a smoothing bit for?

A smoothing bit finishes a metal surface after cutting or chiseling. The Sialvnd 31982 is a 4-inch smoothing bit for metal surface finishing work.

How long are air hammer bits?

It depends on the bit. The Zepkouel bits are 14 inch long, and the Sialvnd smoothing bit is 4 inch. Match the length to the reach your job needs.

Do air hammer bits need a retainer?

Yes. The retainer locks the bit shank into the barrel so the bit stays put under impact. The bits here are sold without a retainer, so check the retainer on your hammer when a bit will not stay seated.

What steel are air hammer bits made from?

It varies by maker. The Mayhew bits are fully hardened and tempered shock resistant tool steel, and the Zepkouel bits are 42Cr-Mo alloy steel with heat treatment. Both listings state a black oxide finish.

Related: air hammer tips, best pneumatic air hammer, best heavy duty air hammer, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Air Hammer Tips for Metal Work

Air hammer tips come in flat, pointed, cutting and punch shapes, and every shape suits a different job in the shop.

Metal Fab Tools ·

Best Heavy Duty Air Hammer (2026)

Five heavy duty air hammers, compared by blows per minute, stroke, impact force, chisels and warranty, for exhaust, pins and body work.