Best Screw Extractor Set (2026): 5 Picks for Broken Screws
Five screw extractor sets compared on piece counts, left-hand bits, extractor types, steel and cases, with the sizes and hardness each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFMENTOOLS 15-Piece Set9.5/10View on Amazon - 2
Largest Setcoobeast 35-Piece Set9.5/10View on Amazon - 3
Best Casetopme 19-Piece Set9.5/10View on Amazon - 4
Smallest SizesNuovoware 22-Piece Set9.4/10View on Amazon
A screw head strips at the worst moment, usually on a fastener that has to come out before the job moves on. The best screw extractor set gives the bench a way back: a left-hand bit drills a hole in the broken screw, and an extractor bites into that hole and turns the screw out in reverse. This roundup compares five sets on what each listing states: piece counts, left-hand bits, extractor types, steel and hardness, and cases.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall FMENTOOLS 15-Piece Set: A center punch plus 7 left-hand bits and 7 spiral extractors, stated HRC 63 to 66, and the only stated after-sales term here, one year. Check price on Amazon
- Largest Set coobeast 35-Piece Set: 35 pieces: 16 left-hand cobalt bits, 13 multi-spline extractors and 6 spiral extractors in a blow molded case. Check price on Amazon
- Best Case topme 19-Piece Set: 19 pieces with a slotted storage case, 7 left-hand bits, 7 spiral extractors and 5 multi-spline extractors. Check price on Amazon
- Smallest Sizes Nuovoware 22-Piece Set: 22 pieces with drill bits from 1.5 mm and extractors from 1.3 mm, plus a magnetic extension bit holder. Check price on Amazon
The machines

35 Pcs Screw Extractor Set,Left Hand Drill Bits
A 35-piece set with 16 left-hand cobalt drill bits, 13 multi-spline extractors and 6 spiral extractors in a blow molded case.
Pros
- 35 pieces, the largest set here
- 16 left-hand cobalt drill bits with a titanium coating
- Multi-spline and spiral extractors in the same case
- Blow molded case keeps the set organized
Cons
- Drill bits are not suggested for stainless steel
- No weight is stated
- No warranty term is stated
- No extractor sizes are stated in mm or inches

15Pcs Screw Extractor Set and Left Hand Drill Bit
A 15-piece set with a center punch, 7 left-hand drill bits and 7 spiral extractors, covering screws from M3 to M18, with one year of after-sales service stated.
Pros
- Includes a center punch for marking the starting point
- Bit sizes from 1/8 in to 19/64 in and extractors from #1 to #5
- Bits state HRC 63 to 66 and a 135-degree split-point design
- One year of after-sales service stated
Cons
- Cannot handle extremely hard alloy or 440 series stainless steel screws
- Left-hand rotation only, so the drill must run counterclockwise
- High speed needs precise control to avoid bit wandering
- No weight is stated

19 Piece Easy Out Screw Extractor Set and Left
A 19-piece set with 7 left-hand drill bits, 7 spiral extractors and 5 multi-spline extractors in a slotted storage case.
Pros
- 7 left-hand bits, 7 spiral extractors and 5 multi-spline extractors
- Extractors are CR-MO, stated harder and tougher than chrome vanadium steel
- Bits are 6542 HSS with a titanium coating
- Slotted storage case keeps each piece in place
Cons
- Excessive impact and torque may break the tool, per the listing
- No warranty term is stated
- No extractor sizes are listed
- No hardness figure is stated

Nuovoware Damaged Screw Extractor Set
A 22-piece set with 10 sizes of drills and extractors, a magnetic extension bit holder and a socket adapter, in a storage tool box.
Pros
- 22 pieces with a magnetic extension bit holder and socket adapter
- Drill sizes from 1.5 mm and extractor sizes from 1.3 mm
- HSS 4341 steel, per the listing
- Storage tool box keeps the set together
Cons
- Listing says 10 sizes but the size lists name 8 drill sizes and 8 extractor sizes
- No warranty term is stated
- No hardness figure is stated

Screw Extractor Set Stocking Stuffers for Men
An HSS 4341 extractor set with a stated hardness up to 67 HRC, for screws with a hardness not exceeding 65 HRC.
Pros
- Hardness stated up to 67 HRC
- States the screw hardness limit, 65 HRC
- Made for use with power drills at a slow speed
- Removes stripped screws in furniture, cars, motorcycles, plumbing and machinery
Cons
- No extractor sizes are stated
- No piece count is stated in the bullets
- No case is stated
- No warranty term is stated
Other welders and gear to compare
GEARWRENCH 4 PC. Bolt Biter Screw Extraction SetCheck price on Amazon
BOSCH BSPE6D 12-Piece Assorted Set Spiral Flute High-CarbonCheck price on Amazon
NEIKO 01925A Screw-Extractor And Left-Hand Drill-Bit SetCheck price on Amazon
Kolvoii 81-Piece SAE/Metric Tap and Die SetCheck price on Amazon
LOPMOU Damaged Screw Extractor SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Pieces | Drill bits | Extractors | Steel | Case | Warranty |
|---|---|---|---|---|---|---|---|
| FMENTOOLS 15-Piece Set | 9.5/10 | 15 | 7 left-hand | 7 spiral | 6542 HSS bits, 35# CR-MO extractors | Storage case | None stated |
| coobeast 35-Piece Set | 9.5/10 | 35 | 16 left-hand cobalt | 13 multi-spline, 6 spiral | HSS titanium coated, Cr-Mo | Blow molded case | None stated |
| topme 19-Piece Set | 9.5/10 | 19 | 7 left-hand | 7 spiral, 5 multi-spline | 6542 HSS, CR-MO | Storage case with slots | None stated |
| Nuovoware 22-Piece Set | 9.4/10 | 22 | 8 sizes listed, 1.5 to 5.9 mm | 8 sizes listed, 1.3 to 5.7 mm | HSS 4341 | Storage tool box | None stated |
| CASEKEY Extractor Set | 9.3/10 | 6 | Not stated | Not stated | HSS 4341 | Not stated | None stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026.
Buying guide: best screw extractor set
Left-hand bits and extractor types
Every set here pairs left-hand drill bits with extractors. The left-hand bit drills the hole while turning counterclockwise, and on some broken screws the bit alone spins the screw out. Multi-spline extractors match the size of the left-hand bit and bite with straight splines, while spiral extractors have flutes that embed deeper as resistance rises. The coobeast set carries both types, 13 multi-spline and 6 spiral, and the topme set carries both as well, 7 spiral and 5 multi-spline.
Steel and hardness
Steel decides whether the extractor bites or breaks. The FMENTOOLS bits are 6542 HSS with a stated hardness of HRC 63 to 66, and its extractors are 35# CR-MO steel. The coobeast bits are cobalt with a titanium coating, and the topme bits are 6542 HSS with a titanium coating; both sets state Cr-Mo extractors. The Nuovoware and CASEKEY sets state HSS 4341, and CASEKEY states a hardness up to 67 HRC with a limit of 65 HRC for the screw. A stated hardness figure beats a bare material name when the screw is hard.
Sizes and coverage
Piece counts run from 15 to 35 here, but the count alone says little; the sizes inside the case matter. The FMENTOOLS set lists bit sizes from 1/8 in to 19/64 in and extractors from #1 to #5, and states coverage from M3 to M18. The Nuovoware set lists drill sizes from 1.5 to 5.9 mm and extractor sizes from 1.3 to 5.7 mm. The coobeast set states 16 bits, 13 multi-spline extractors and 6 spiral extractors without listing sizes, and the CASEKEY listing states no sizes at all. Match the extractor to the hole the bit drills, not to the piece count.
Cases and organization
A case keeps small bits from walking off the bench. The coobeast set stores in a heavy duty blow molded case, the topme set in a durable storage case with a slot for each piece, and the FMENTOOLS set in a durable storage case. The Nuovoware set comes with a little storage tool box. The CASEKEY listing states no case, so plan on a pouch or a tray if the bits need a home.
What the listings do not state
No listing here states a torque rating, so there is no figure for how much force an extractor takes before it breaks. The coobeast listing notes its drill bits are not suggested for stainless steel, and the FMENTOOLS listing states its bits cannot handle 440 series stainless steel. Only the FMENTOOLS listing states an after-sales term, one year. Treat an unstated figure as unknown, not as zero.
Use as directed. Wear eye protection when drilling, keep the drill at a slow speed, and never force an extractor that will not turn; excess torque may break the tool, per the topme listing. Set the drill to counterclockwise rotation for left-hand bits, keep hands clear of the bit, and stop if the extractor binds. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Drill: every set here runs on a power drill, and the listings state slow speed for extraction; check that the drill runs counterclockwise for left-hand bits.
- Cutting fluid: the FMENTOOLS listing states to apply cutting fluid for smoother removal.
- Sizes: check the bit and extractor sizes in the case against the screws on the bench; the FMENTOOLS set lists sizes from 1/8 in to 19/64 in.
- Fit check: pick a left-hand bit smaller than the damaged screw, and use the extractor that matches that hole.
- Stainless steel: the coobeast bits are not suggested for stainless steel, and the FMENTOOLS bits cannot handle 440 series stainless steel; check the screw material first.
FAQ for welders
How do you use a screw extractor set?
Drill a hole in the broken screw with a left-hand bit smaller than the screw, then turn the extractor counterclockwise into the hole until it grips and backs the screw out. Run the drill at a slow speed, as the listings state. The FMENTOOLS listing adds cutting fluid for smoother removal.
How does a screw extractor work?
The extractor has spiral or multi-spline flutes that bite into the drilled hole as you turn it counterclockwise. The grip tightens as resistance rises, so the broken screw turns out with the extractor. The coobeast listing states its spiral flutes embed themselves to increase grip as resistance increases.
What size extractor do I need for a broken screw?
Choose a left-hand bit smaller than the damaged screw, drill the hole, then use the extractor that matches that hole. The FMENTOOLS set lists bit sizes from 1/8 in to 19/64 in and extractors from #1 to #5, and states coverage from M3 to M18. No listing here names a size for a #6 screw.
Can a screw extractor set remove a broken bolt or stud?
Yes, per the listings. The sets here list screws, bolts, studs and fasteners: the FMENTOOLS set covers screws from M3 to M18, and the coobeast set lists broken bolts and damaged screws. Pick the extractor that matches the hole the bit drills.
What if the extractor will not grip the screw?
Check that the drill is set to counterclockwise rotation, the speed is slow, and the hole is the size the extractor needs. The topme listing warns that excess impact and torque may break the tool, so keep the speed slow and steady rather than forcing the extractor.
Related: best bolt extractor set, screw extractor vs bolt extractor, best extra long screw extractor, and the metal fab tools hub.
Scoring, line by line
Each set is scored out of 10 on performance, build, value, safety certification and warranty, with the weights published on our How We Pick page. No extractor here states a safety certification, so every set here scores zero on that criterion; the ranking comes from performance, build and value, plus the stated after-sales term on the FMENTOOLS set.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| coobeast 35-Piece Set | 9.5 | 30 | 21 | 21 | 0 | 0 |
| FMENTOOLS 15-Piece Set | 9.5 | 30 | 21 | 20 | 0 | 0 |
| topme 19-Piece Set | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Nuovoware 22-Piece Set | 9.4 | 29 | 20 | 20 | 0 | 0 |
| CASEKEY Extractor Set | 9.3 | 26 | 19 | 18 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




