Best Screw Extractor (2026)
Five screw extractors, pliers and kits, compared by size range, steel, hardness and warranty, for stripped, rusted and broken fasteners.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVampliers Pliers9.6/10View on Amazon - 2
Best KitTHINKWORK 54-Piece Kit9.5/10View on Amazon - 3
Best for Tight SpacesENGINEER PZ-589.5/10View on Amazon - 4
Best Classic SetIRWIN 35-Piece Set9.4/10View on Amazon
A stripped screw head stops a job cold: the driver spins, the head rounds out, and the fastener stays put. The best screw extractor gets that fastener out without wrecking the part around it, and this guide compares extractor pliers and kits on the numbers that decide the pick: fastener range, steel, hardness, extras and warranty, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Vampliers Pliers: High carbon Japanese steel, HRC60±2, fits screws Ø3 to 9.5 mm, and the only stated warranty here, 4 years. Check price on Amazon
- Best Kit THINKWORK 54-Piece Kit: 54 pieces in Cr-Mo steel and HSS with left hand drill bits, for fasteners 6 to 19 mm, in a storage case. Check price on Amazon
- Best for Tight Spaces ENGINEER PZ-58: Slim jaws for confined areas, vertical and horizontal serrations, and a side wire cutter, made in Japan. Check price on Amazon
- Best Classic Set IRWIN 35-Piece Set: 35 extractors and drill bits with etched sizes and a plastic case, in the left hand spiral flute style. Check price on Amazon
The machines

VAMPLIERS 6.25" Stripped Screw Extractor
A 6.25 inch extractor plier in high carbon Japanese steel, HRC60±2, for damaged screws Ø3 to 9.5 mm, with a 4 year warranty.
Pros
- High carbon Japanese steel jaws, hardness HRC60±2
- Removes damaged screws Ø3 to 9.5 mm (0.12 to 0.37 in)
- Side wire cutter: copper wire Ø3.2 mm, steel wire Ø2.6 mm
- 4 year warranty with purchase, the only stated warranty here
Cons
- 6.25 in length suits small fasteners, not large bolts
- No storage case in the listing
- Grips the screw head; it does not drill out a broken stud

54-Piece Broken Bolt Extractor Kit with Easy Out
A 54 piece broken bolt extractor kit in chrome-molybdenum steel and HSS, with left hand drill bits and a storage case, for fasteners 6 to 19 mm.
Pros
- 54 pieces: extractors and left hand drill bits in one case
- Chrome-molybdenum and high-speed steel for hard fasteners
- Fits fasteners 6 to 19 mm, with a 3/8 inch square drive
- Laser-etched markings and a heavy-duty blow-molded case
Cons
- No hardness figure in the listing
- No warranty term in the listing
- No drill bit sizes listed per extractor
- Kit weight not stated

ENGINEER PZ-58 Screw Removal Pliers Stripped Screw
A made in Japan screw removal plier with slim jaws for confined areas, for fasteners Ø3 to 9.5 mm, with a side wire cutter.
Pros
- Made in Japan, with vertical and horizontal serrations on the jaws
- Slim jaws for work in confined areas
- Removes fasteners Ø3 to 9.5 mm, including tamper proof screws
- Side cutting blade, hardness HRC60±2, spring loaded
Cons
- No warranty term in the listing
- No material stated in the listing
- No storage case in the listing
- 6.3 in length suits small fasteners, not large bolts

IRWIN Tools Hanson Screw Extractor and Drill Bit
A 35 piece extractor and drill bit set in the easy out spiral flute style, with sizes etched on each tool and a plastic case.
Pros
- 35 extractors and drill bits, the commonly used sizes per the listing
- Aggressive left hand design with spiral flutes that bite as resistance rises
- Extractor sizes and drill bit sizes etched on each tool
- Removes broken studs, bolts, socket screws and fittings
Cons
- No fastener size range in the listing
- No material or hardness stated
- No warranty term in the listing

WORKPRO 8" Linesman PRO Screw Extractor
An 8 inch linesman plier with non-slip jaws for crushed, rusted and stripped screws, in chrome vanadium steel.
Pros
- Non-slip jaws squeeze and turn crushed, rusted and fixed screws
- Chrome vanadium steel, heat-treated hardness up to 55 HRC
- High-frequency treated hardness up to 65 HRC
- Ergonomic, hand-friendly body
Cons
- Size range printed backwards: 0.97 to 0.41 inch head diameter
- No warranty term in the listing
- No side wire cutter stated, unlike the ENGINEER and Vampliers pliers
Other welders and gear to compare
NEIKO 01925A Screw-Extractor And Left-Hand Drill-Bit SetCheck price on Amazon
VAMPLIERS 5" Mini Stripped M2 Screw Extractor Pliers ESD SafeCheck price on Amazon
19 Piece Easy Out Screw Extractor Set and Left Hand DrillCheck price on Amazon
CRAFTSMAN CMMT14108 Spiral Screw ExtractorCheck price on Amazon
IRWIN Screw ExtractorCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Type | Fastener range | Material | Hardness | Extras | Warranty |
|---|---|---|---|---|---|---|---|
| Vampliers Pliers | 9.6/10 | Pliers | Ø3 – 9.5 mm | High carbon steel | HRC60±2 | Side wire cutter, spring-loaded | 4 years |
| THINKWORK 54-Piece Kit | 9.5/10 | Kit | 6 – 19 mm | Cr-Mo steel, HSS | Not stated | Left hand drill bits, storage case | Not stated |
| ENGINEER PZ-58 | 9.5/10 | Pliers | Ø3 – 9.5 mm | Not stated | HRC60±2 | Side wire cutter, spring-loaded | Not stated |
| IRWIN 35-Piece Set | 9.4/10 | Kit | Not stated | Not stated | Not stated | Drill bits, plastic case | Not stated |
| WORKPRO Linesman | 9.4/10 | Pliers | 0.41 – 0.97 in head | Chrome vanadium steel | 55 HRC, 65 HRC | Non-slip jaws | Not stated |
Specifications are manufacturer stated, as published on each listing and collected 11 November 2026. Fastener range is the screw size the listing says the tool removes.
Best Screw Extractor: Pliers or Kit?
Pliers for screw heads you can grip
Pliers grip the screw head from the outside, so they suit a stripped head that still stands proud of the surface. The Vampliers and ENGINEER pliers fit screws Ø3 to 9.5 mm, and the WORKPRO plier lists screw head diameters from 0.41 to 0.97 in. Slim jaws matter in tight spots: the ENGINEER listing calls out slim jaws for confined areas. Pliers need no drilling, which makes them the fast option when the head is reachable.
Kits for broken studs and bolts
A kit suits a fastener broken below the surface, where there is no head to grip. Drill a hole with the bit the extractor calls for, seat the extractor, and turn it out. The THINKWORK kit covers fasteners 6 to 19 mm with left hand drill bits, and the IRWIN set covers broken studs, bolts, socket screws and fittings with 35 extractors and drill bits.
Size range first
Match the range to the fastener before ordering. The pliers here top out at 9.5 mm, so a larger bolt needs a kit. The THINKWORK kit states 6 to 19 mm; the IRWIN set states no range, so check the etched sizes on the tools against the job.
Steel and hardness
The listings name chrome vanadium steel, high carbon Japanese steel, and chrome-molybdenum steel with HSS. Hardness figures appear on 3 of the 5 listings: HRC60±2 for the Vampliers and ENGINEER pliers, and 55 HRC with 65 HRC high-frequency treatment for the WORKPRO plier. The kits state no hardness figure.
Warranty and storage
Only 1 of the 5 listings states a warranty: Vampliers, 4 years in the bullets against 3 years in the spec table. Both kits include a case: a blow-molded case for the THINKWORK 54 piece kit and a plastic case for the IRWIN 35 piece set. The pliers list no case, so plan storage for them.
Before You Strike an Arc
- Check the fastener size first: Ø3 to 9.5 mm for the pliers here, 6 to 19 mm for the THINKWORK kit.
- Match the drill bit to the extractor: the IRWIN set etches extractor and drill bit sizes on each tool, and the THINKWORK kit includes left hand drill bits.
- Count the case on arrival: 54 pieces in the THINKWORK kit, 35 pieces in the IRWIN set.
- Wear eye protection when drilling and extracting: broken fasteners and chips fly.
- Confirm the warranty in writing: only the Vampliers listing states one, 4 years in the bullets against 3 years in the spec table.
FAQ for welders
How to use a screw extractor?
Drill a pilot hole in the broken fastener with the drill bit size the extractor listing states, seat the extractor in the hole, and turn it counter-clockwise so the left hand flutes bite and back the fastener out. The pliers in this guide skip the drilling step: grip the screw head with the jaws and turn.
How to use a screw extractor kit?
A kit pairs drill bits with extractors: drill with the left hand bit, then drive the extractor into the hole and turn it out. The THINKWORK kit includes left hand drill bits and a case for fasteners 6 to 19 mm, and the IRWIN set includes 35 extractors and drill bits with the sizes etched on each tool.
What is a screw extractor set?
A set of extractors, usually with drill bits, for removing broken or stripped screws and bolts. The sets here run from 35 pieces to 54 pieces. Pliers are the other style: they grip the screw head from the outside, with no drilling.
What size screw extractor do I need?
Match the extractor to the fastener. The pliers here fit screws Ø3 to 9.5 mm, and the THINKWORK kit fits fasteners 6 to 19 mm. Check the range on the listing before ordering, and pick the extractor whose range covers the fastener.
Do I need left hand drill bits?
Left hand bits turn counter-clockwise, so they can back a broken fastener out while drilling. The THINKWORK kit includes a left hand drill bit set, and the IRWIN set pairs extractors with drill bits. The pliers need no drill bits at all.
Related: the best screw extractor set, screw extractor vs bolt extractor and the best bolt extractor set. Also see our metal fab tools hub.
Scoring, line by line
Each extractor is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. No listing here states a safety standard, so every pick scores zero on safety and the ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Vampliers Pliers | 9.6 | 30 | 22 | 20 | 0 | 3 |
| THINKWORK 54-Piece Kit | 9.5 | 32 | 21 | 21 | 0 | 0 |
| ENGINEER PZ-58 | 9.5 | 30 | 22 | 20 | 0 | 0 |
| IRWIN 35-Piece Set | 9.4 | 29 | 19 | 20 | 0 | 0 |
| WORKPRO Linesman | 9.4 | 27 | 19 | 19 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




