Best Screw Extractor for #6 Screw (2026): 5 Picks for Stripped Screws
5 screw extractors for #6 screws compared on size range, steel, grip design and stated drill sizes, from 6 piece sets to a single No. 6 spiral extractor.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best for #6 ScrewIVY Classic No. 69.7/10View on Amazon - 2
Best OverallGreywolf 6 Piece Set9.7/10View on Amazon - 3
Best Spiral FluteIRWIN Spiral 6 Piece9.6/10View on Amazon - 4
Best CompactOntel SpeedOut 4 Piece9.5/10View on Amazon
A screw head strips at the worst moment, usually on the last fastener of a job that is already behind schedule. The head rounds out, the driver spins, and the screw sits flush in the work with nothing left to grab. This guide compares the best screw extractor for #6 screw work, 5 extractors and sets scored on size range, steel, grip and stated drill sizes, so the pick matches the screw in front of you.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best for #6 Screw IVY Classic No. 6: A single No. 6 spiral extractor that removes 5/8 to 7/8 inch screws with a 13/32 inch drill. Check price on Amazon
- Best Overall Greywolf 6 Piece Set: A 6 piece HSS set at 63 to 65HRC with a hex shank, for screws and bolts 3 to 12mm. Check price on Amazon
- Best Spiral Flute IRWIN Spiral 6 Piece: A 6 piece spiral flute set with the size and drill bit size etched on each tool. Check price on Amazon
- Best Compact Ontel SpeedOut 4 Piece: A 4 piece titanium-coated set that removes 4 inch deck screws with any drill. Check price on Amazon
The machines

IVY Classic 01356 Chrome Alloy-Steel No. 6 Spiral
A single No. 6 spiral extractor in chrome alloy steel that removes 5/8 to 7/8 inch screws with a 13/32 inch drill.
Pros
- The only pick sized exactly as a No. 6 extractor
- States the drill size, 13/32 inch, and the screw range, 5/8 to 7/8 inch
- Tapered left hand spiral flute grips the screw firmly
- Polished body and sandblasted flute resist rust
Cons
- 1 extractor only, no set or case
- No warranty term is stated
- No stated hardness figure
- Suits 1 screw size range, not a range of screws

Greywolf 6 pcs Damaged Screw Extractor
A 6 piece set in heat treated HSS 4341 at 63 to 65HRC, with a left hand spiral groove, hex shank and case, for screws and bolts 3 to 12mm.
Pros
- Heat treated HSS 4341 at 63 to 65HRC
- Patented left hand spiral groove with 2x the grip
- Hex shank stops the drill chuck slipping
- Fits 1/4 inch and 3/8 inch chucks and hand drivers
Cons
- Lists 5 sizes, #0 to #4, for a 6 piece set
- No warranty term is stated
- No stated drill size per extractor
- Material is named as both HSS 4341 and titanium alloy, with no explanation

IRWIN Screw Extractor, Spiral Flute
A 6 piece spiral flute set for broken studs, bolts, socket screws and fittings, with the extractor size and drill bit size etched on each tool.
Pros
- Aggressive left hand spiral design for extra grip
- Spiral flutes embed deeper as resistance rises
- Size and drill bit size etched on each tool
- Removes studs, bolts, socket screws and fittings
Cons
- No material is stated
- No hardness figure is stated
- Warranty is listed as YES with no term stated
- No stated size range for the screws it fits

6PCs Damaged Screw Extractor Kits
A 6 piece set in sizes 1# to 6#, with stated drill sizes from 4mm to 15mm and a storage case, for damaged, broken and rusted screws and bolts.
Pros
- Stated drill size for every extractor, 4mm to 15mm
- Stated screw range for every size, 4mm to 25mm
- Storage case included for carry and storage
- Covers damaged, broken and rusted heads and bolts
Cons
- Title says chrome-vanadium steel, bullets say bearing steel
- No warranty term is stated
- No hardness figure is stated
- Chuck fit is not stated

Ontel SpeedOut Titanium Damaged Screw Extractor
A 4 piece titanium-coated set that works with any drill and removes stripped and damaged screws, including 4 inch deck screws from redwood.
Pros
- Titanium coating lasts 6 times longer than regular bits, per the listing
- Removes 4 inch long deck screws from redwood
- Works with any drill
- Compact 4 piece set
Cons
- No stated hardness figure
- No stated size range
- Warranty is listed as Warranty with no term stated
- No stated drill sizes
Other welders and gear to compare
LOPMOU Damaged Screw Extractor SetCheck price on Amazon
Drill America DEWEZ6 #6 Carbon Steel Screw ExtractorCheck price on Amazon
Greywolf 6 pcs screw extractor setCheck price on Amazon
NEIKO 01925A Screw-Extractor And Left-Hand Drill-Bit SetCheck price on Amazon
ENGINEER PZ-58 Screw Removal Pliers Stripped Screw ExtractorCheck price on Amazon
Spec sheet comparison
| Extractor | Gear Score | Pieces | Sizes | Material | Fits | Warranty |
|---|---|---|---|---|---|---|
| IVY Classic No. 6 | 9.7/10 | 1 | No. 6 | Chrome alloy-steel | 5/8 to 7/8 inch screws | Not stated |
| Greywolf 6 Piece Set | 9.7/10 | 6 | #0 to #4 | HSS 4341 | 3 to 12mm screws and bolts | Not stated |
| IRWIN Spiral 6 Piece | 9.6/10 | 6 | Not stated | Not stated | Studs, bolts, fittings | Not stated |
| Zeromall 6 Piece Kit | 9.6/10 | 6 | 1# to 6# | Bearing steel | 4 to 25mm screws | Not stated |
| Ontel SpeedOut 4 Piece | 9.5/10 | 4 | 4 sizes | Titanium-coated | Stripped screws | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).
Buying guide: the best screw extractor for #6 screw
Match the extractor size to the screw
Extractor sizes run in numbered steps, and the size must suit the screw left in the work. The IVY Classic is a single No. 6 that removes 5/8 to 7/8 inch screws with a 13/32 inch drill, while the Greywolf set covers 3 to 12mm and the Zeromall kit runs 1# to 6# with a stated drill size for each step. Pick the size from the screw range the listing states, not from the extractor number alone.
Drill size stated on the listing
An extractor needs a pilot hole drilled to the size the maker lists. The IVY Classic states a 13/32 inch drill, and the Zeromall kit states a drill size for each of its 6 extractors, from 4mm to 15mm. The IRWIN set etches the recommended drill bit size on each tool, which keeps the size with the tool. Where a listing states no drill size, check the maker guidance before drilling.
Spiral grip and shank
Left hand spiral flutes bite deeper as resistance rises, which is how the IRWIN and IVY Classic extractors hold. The Greywolf set adds a patented left hand spiral groove with 2x the grip and a hex shank that stops the drill chuck slipping. A hex shank or an etched size marking is worth more than a plain round shank when the screw is rusted in place.
Steel and hardness
Steel decides whether the extractor holds or snaps in the hole. The Greywolf set states heat treated HSS 4341 at 63 to 65HRC and claims 30% harder than standard carbon steel extractors. The IVY Classic states chrome alloy steel, the Ontel set is titanium coated, and the Zeromall kit names bearing steel in its bullets while its title says chrome-vanadium steel. Where a listing states no hardness figure, treat the steel claim as a maker statement rather than a measured figure.
Use as directed. Drill the pilot hole to the stated size, run the drill at low speed, and keep the extractor straight so it bites without snapping. Wear eye protection and gloves when drilling out a broken screw, and keep the work clamped so it cannot spin. If the extractor will not bite, stop and drill the hole to the next stated size rather than forcing the tool.
Before You Strike an Arc
- Check the extractor size against the screw range the listing states before drilling.
- Confirm the drill size for the extractor in hand, 13/32 inch for the IVY Classic or the stated size for each Zeromall step.
- Check the chuck fit: the Greywolf set fits 1/4 inch and 3/8 inch chucks and hand drivers.
- Run the drill at low speed until the broken screw is out, as the Zeromall listing advises.
- Check the case contents on arrival where a listing names 5 sizes for a 6 piece set, as the Greywolf listing does.
FAQ for welders
Do screw extractor sets work?
Yes, when the size matches the screw and the pilot hole is drilled to the stated size. The extractor bites into the drilled hole with a left hand spiral, so turning it counter-clockwise backs the screw out. A set that states the drill size for each extractor, such as the Zeromall kit, takes the guesswork out of the pilot hole.
What is a bolt extractor set?
A bolt extractor set removes broken, stripped or rusted bolts and studs, the same way a screw extractor removes damaged screws. The IRWIN set here is made for broken studs, bolts, socket screws and fittings, and the Greywolf set covers bolts from 3 to 12mm. The difference is mainly the size range and the grip the set is built for.
What is a screw extractor kit?
A screw extractor kit is a set of extractors in numbered sizes, usually with a case, for removing stripped, damaged or broken screws. The 6 piece kits here cover sizes from 1# to 6# or #0 to #4, and the 4 piece Ontel set covers stripped screws with titanium-coated bits. A kit suits a shop that meets damaged screws in more than 1 size.
What size screw extractor to use?
Use the extractor whose stated screw range covers the screw in the work. The IVY Classic No. 6 removes screws 5/8 to 7/8 inch with a 13/32 inch drill, while the Greywolf set covers 3 to 12mm and the Zeromall kit states a range for each size from 4mm to 25mm. Measure the screw first, then match it to the stated range.
Related: best screw extractor set, best bolt extractor set, screw extractor vs bolt extractor, best screw extractor for small screws, and the metal fab tools hub.
Scoring, line by line
Each extractor is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No extractor here states a safety standard such as CSA, UL or ETL, so every pick scores zero on safety. No listing states a concrete warranty term either, so warranty scores zero across the guide and the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| IVY Classic No. 6 | 9.7 | 33 | 22 | 20 | n/a | 0 |
| Greywolf 6 Piece Set | 9.7 | 30 | 22 | 21 | n/a | 0 |
| IRWIN Spiral 6 Piece | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Zeromall 6 Piece Kit | 9.6 | 29 | 19 | 21 | n/a | 0 |
| Ontel SpeedOut 4 Piece | 9.5 | 28 | 20 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




