Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Screw Extractor for Small Screws (2026)

Five screw extractor sets and pliers compared by extractor sizes, drill bits, steel, grip and warranty, for stripped small screws in the shop.

Best Screw Extractor for Small Screws (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VAMPLIERS VT-001-5Best OverallVAMPLIERS VT-001-59.7/10View on Amazon
  2. 2DOAHO 9 PCSBest Drill SetDOAHO 9 PCS9.5/10View on Amazon
  3. 3STREBITO 32 PCSMost PiecesSTREBITO 32 PCS9.5/10View on Amazon
  4. 4VAZIOYAR PliersBest PliersVAZIOYAR Pliers9.4/10View on Amazon

A small screw with a stripped head stops the whole job: the driver spins, the head rounds out a little more with each try, and the part it holds will not come free. The best screw extractor for small screws gets it out without chewing up the threads around it. This guide compares five sets and pliers that list sizes for small screws, by extractor sizes, drill bits, steel, grip and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall VAMPLIERS VT-001-5: Removes screws Ø2 – 3.5mm and M1.2 – M2 screws, high carbon Japanese steel, ESD Safe handles and a 4-Year Warranty. Check price on Amazon
  • Best Drill Set DOAHO 9 PCS: 6 HSS 4341 extractors and 3 twist drill bits at 63-65HRC, for stripped screws in wood, plastic and thin stainless steel. Check price on Amazon
  • Most Pieces STREBITO 32 PCS: 20 extractors plus 10 screwdriver bits, an extension shaft and a socket adapter, for 3 – 12 mm screws and bolts. Check price on Amazon
  • Best Pliers VAZIOYAR Pliers: Serrated jaws grip stripped screw heads from 3 to 12.7mm, and the pliers also strip and cut wire and crimp terminals. Check price on Amazon

The machines

VAMPLIERS 5" Mini Stripped M2 Screw Extractor

VAMPLIERS 5" Mini Stripped M2 Screw Extractor

Vampliers9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 inch mini plier that removes stripped screws from Ø2 to 3.5mm and M1.2 to M2 screws, in high carbon Japanese steel with ESD Safe TPR handles and a 4-Year Warranty.

Pros

  • Removes screws Ø2 - 3.5mm and M1.2 - M2 screws, the smallest range here
  • High carbon Japanese steel, hardness HRC56±2, made in Japan
  • ESD Safe TPR handles for electronics work
  • 4-Year Warranty with purchase

Cons

  • Made for small screws only, not larger fasteners
  • No drill bits included, it grips the screw head
  • No storage case is stated
DOAHO 9 PCS Damaged Screw Extractor Set,Birthday

DOAHO 9 PCS Damaged Screw Extractor Set,Birthday

Doaho9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 piece set with 6 HSS 4341 extractors and 3 twist drill bits, at 63-65HRC, for stripped screws in plastics, wood, aluminium, copper, iron and thin stainless steel.

Pros

  • 6 extractors in sizes #0 to #4, plus 3 twist drill bits
  • HSS 4341 steel at 63-65HRC, the highest hardness stated here
  • Drill bits in HSS2.0, HSS3.0 and HSS3.5 for small screws
  • Clear two-step method in the listing: drill, then extract

Cons

  • Bullets list #2 twice among the six extractors
  • Not suitable for thick stainless steel, high carbon steel or alloy steel
  • No storage case is stated
  • No warranty term is stated
STREBITO 32PCS Damaged Screw Extractor Set

STREBITO 32PCS Damaged Screw Extractor Set

STREBITO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 32 piece set with 20 extractors, 10 screwdriver bits, an extension shaft and a socket adapter, in HSS 4341 and S2 steel at 60-65HRC, for 3 - 12 mm screws and bolts.

Pros

  • 20 extractors, Ex#1 to #10 and Dr#1 to #10
  • Works with 3 - 12 mm screws and bolts
  • Magnetic extension shaft and socket adapter included
  • Zippered canvas bag with an extra compartment

Cons

  • No warranty term is stated
  • 10 of the 32 pieces are screwdriver bits, not extractors
  • The listing states a 3 - 12 mm screw range but no bit diameters
  • No listing of which extractor fits which screw size
Nuovoware Damaged Screw Extractor Set

Nuovoware Damaged Screw Extractor Set

Nuovoware9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 33 piece set with 10 different sizes of drills and extractors, a magnetic extension bit holder and a socket adapter, in HSS 4341 steel, packed in a storage tool box.

Pros

  • 33 pieces, the largest count here
  • Magnetic extension bit holder and socket adapter included
  • Storage tool box keeps the set together
  • Two-step method in the listing: smaller bit, then same-size extractor

Cons

  • The 10 sizes are not listed by number
  • No hardness figure is stated
  • No warranty term is stated
  • No screw-size range is stated
VAZIOYAR Multi-Function Screw Extractor Pliers

VAZIOYAR Multi-Function Screw Extractor Pliers

Vazioyar9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch extractor plier with serrated jaws for stripped screw heads from 3 to 12.7mm, in chrome vanadium steel with non-slip handles, that also strips and cuts wire and crimps terminals.

Pros

  • Serrated jaws grip round, square, hex and flat screw heads
  • Fits screw heads from 3 to 12.7mm, Truss M2 - 4 and Pan M1.6 - 6
  • Chrome vanadium steel with a black oxide finish
  • Also strips wire, cuts wire and crimps terminals

Cons

  • Pliers grip the head, so a fully sheared screw has nothing to grip
  • No warranty term is stated
  • No extractor sizes are listed by number
  • 6 inch plier, larger than the 5 inch Vampliers

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Pieces Extractor sizes Small screw fit Steel Warranty
VAMPLIERS VT-001-5 9.7/10 1 M1.2 – M2 Ø2 – 3.5mm High carbon steel 4-Year Warranty
DOAHO 9 PCS 9.5/10 9 #0 – #4 HSS2.0, HSS3.0, HSS3.5 bits HSS 4341, 63-65HRC Not stated
STREBITO 32 PCS 9.5/10 32 Ex#1 – #10 3 – 12 mm screws HSS 4341, S2, 60-65HRC Not stated
Nuovoware 33 PCS 9.4/10 33 10 sizes Not stated HSS 4341 Not stated
VAZIOYAR Pliers 9.4/10 1 Not stated 3 – 12.7mm heads Chrome vanadium Not stated

Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).

Buying guide: best screw extractor for small screws

Match the extractor to the screw

Size is the whole job with small screws. The Vampliers fits M1.2 to M2 screws and heads from Ø2 to 3.5mm, the VAZIOYAR pliers fit screw heads from 3 to 12.7mm, including Truss screws M2 to 4 and Pan screws M1.6 to 6, and the STREBITO set works with 3 to 12 mm screws and bolts. The DOAHO set lists extractors from #0 to #4 with drill bits in HSS2.0, HSS3.0 and HSS3.5, while the Nuovoware set states 10 different sizes without naming them. Measure the screw head before you pick a size.

Drill bits and extractors

Most sets here work in two steps: drill a hole, then extract. The Nuovoware listing says to choose a drill bit smaller than the damaged screw, then use the same size extractor to take it out in reverse with an electric hand drill. The STREBITO listing says to pick a bit slightly smaller than the damaged screw, drill a reverse hole, then switch to the extractor bit, apply steady downward pressure, and turn counterclockwise at low speed. The DOAHO set works the same way: drill the hole with the screw removal head or a twist drill bit, then convert to the extractor head and take the screw out.

Steel and hardness

Three sets here state HSS 4341 steel: DOAHO, Nuovoware and STREBITO. The DOAHO set states 63-65HRC, the STREBITO set states 60-65HRC with S2 steel and CRV screwdriver bits, and the Vampliers states high carbon Japanese steel at HRC56±2. The VAZIOYAR pliers state chrome vanadium steel with a black oxide finish. The DOAHO listing states its set suits low and medium hardness materials such as plastics, wood, aluminium, copper, iron and thin stainless steel, and not high hardness materials such as thick stainless steel, high carbon steel and alloy steel, while the STREBITO listing states its set is made for stainless steel.

Pliers or a drill set

Pliers and drill sets solve the same problem in different ways. The two pliers here grip the screw head and twist it out, with no hole to drill, which suits screws whose heads are stripped but still standing proud. Drill sets suit screws with heads too damaged to grip, since the extractor bites into a drilled hole. The Vampliers is built for electronics, with a stated range for laptops, mother boards, circuit boards, phones, PCs and game consoles, while the VAZIOYAR pliers also strip wire, cut wire and crimp terminals for general repair work.

Storage and carry

Small extractors are easy to lose, so storage matters. The Nuovoware set comes in a little storage tool box, and the STREBITO set comes in a compact zippered canvas bag with an extra compartment for small additional tools. The DOAHO set states no storage, and the two pliers need no case at all. Keep the set where you keep the drills, so the right size is on hand when a screw strips.

Use as directed. Wear eye protection when drilling, keep fingers clear of the bit, and run the drill at low speed as the listings describe. Small screws snap easily, so use steady downward pressure and stop if the extractor starts to slip. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Check the screw size first: the Vampliers fits M1.2 to M2 screws and Ø2 to 3.5mm heads, the VAZIOYAR fits heads from 3 to 12.7mm.
  • Pick the drill bit smaller than the damaged screw, as the Nuovoware and STREBITO listings describe.
  • Match the steel to the job: the DOAHO set suits low and medium hardness materials and not thick stainless steel or high carbon steel.
  • Check what arrives: the Nuovoware set comes in a storage tool box, the STREBITO set in a zippered canvas bag.
  • For electronics work, the Vampliers lists ESD Safe TPR handles and a 4-Year Warranty.

FAQ for welders

What size screw extractor do I need for a small screw?

Match the extractor to the screw head. The Vampliers fits M1.2 to M2 screws and heads from Ø2 to 3.5mm, the VAZIOYAR pliers fit heads from 3 to 12.7mm, and the STREBITO set works with 3 to 12 mm screws and bolts. The DOAHO set lists extractors from #0 to #4 with drill bits in HSS2.0, HSS3.0 and HSS3.5.

How do you use a screw extractor set?

Drill a hole in the broken screw with a bit smaller than the screw, then switch to the extractor and turn it counterclockwise at low speed. The DOAHO, Nuovoware and STREBITO listings all describe the same two steps, and the STREBITO listing adds steady downward pressure so the bit grips the screw. Use an electric hand drill at low speed, as the listings describe.

Can a screw extractor remove a rusted screw?

The listings here say yes. The VAZIOYAR pliers state they extract stripped, damaged, fixed and rusted screws, and the STREBITO set states it removes damaged, broken and rusted screws and bolts. Grip the head firmly with pliers, or drill cleanly and let the extractor bite, rather than forcing a slipping driver.

Are extractor pliers better than a drill set for small screws?

It depends on the screw head. Pliers grip the head and twist it out with no drilling, which suits a stripped head that still stands proud. A drill set suits a head too damaged to grip, since the extractor bites into a drilled hole. For tiny screws in electronics, the Vampliers pliers state a range down to Ø2mm.

Do screw extractor sets work on stainless steel?

It depends on the set. The DOAHO listing states its set suits thin stainless steel but not thick stainless steel, high carbon steel or alloy steel. The STREBITO listing states its set is made for stainless steel, with HSS 4341 and S2 steel at 60-65HRC. Check the listing for the material before you buy.

Related: the best screw extractor set, screw extractor vs bolt extractor, the best twist drill bit set, and our metal fab tools hub.

Scoring, line by line

Each pick is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Only one pick here states a safety feature, the ESD Safe handles on the Vampliers, so the other four score zero on safety; the ranking comes from the other four criteria as well.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VAMPLIERS VT-001-5 9.7 32 22 20 7 3
DOAHO 9 PCS 9.5 30 21 21 0 0
STREBITO 32 PCS 9.5 29 21 21 0 0
Nuovoware 33 PCS 9.4 28 20 21 0 0
VAZIOYAR Pliers 9.4 27 20 20 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides

Metal Fab Tools ·

Best Screw Extractor (2026)

Five screw extractors, pliers and kits, compared by size range, steel, hardness and warranty, for stripped, rusted and broken fasteners.