Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Hss vs Cobalt Drill Bit: Which One Should You Buy?

HSS step and twist bits cover sheet metal, wood and plastic, while cobalt M42 bits are listed for stainless steel, cast iron and titanium; here is how the 4 listings compare.

Hss vs Cobalt Drill Bit: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BOSCH CO2159B 1-Piece 1/2 In. x 6 In. Cobalt M42BOSCH CO2159B 1-Piece 1/2 In. x 6 In. Cobalt M429.6/10View on Amazon
  2. 2BOSCH CO2135B 1-Piece 1/8 In. x 2-3/4 In. CobaltBOSCH CO2135B 1-Piece 1/8 In. x 2-3/4 In. Cobalt9.6/10View on Amazon
  3. 3Step Drill Bit Set - 5PCS Titanium HSS Step BitStep Drill Bit Set - 5PCS Titanium HSS Step Bit9.6/10View on Amazon
  4. 419 Pcs Hex Shank Drill Bit Set, 1/16"-1/4"19 Pcs Hex Shank Drill Bit Set, 1/16"-1/4"9.5/10View on Amazon

Verdict. Pick the cobalt side for stainless steel, cast iron and titanium, and pick the HSS side for sheet metal, wood and plastic in many sizes. The Bosch cobalt M42 bits are the bits for hard metals, while the SEDIANAS step set and the AUYAARS twist set cover hole sizes and home jobs.

A bit that cuts mild steel can stall on stainless steel, and a bit that covers many hole sizes can be the wrong pick for a hard metal. This hss vs cobalt drill bit comparison puts the HSS step and twist sets against the cobalt M42 bits on what each listing states, so the choice turns on the metal in front of you.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The 4 bits

BOSCH CO2159B 1-Piece 1/2 In. x 6 In. Cobalt M42

BOSCH CO2159B 1-Piece 1/2 In. x 6 In. Cobalt M42

Bosch9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/2 In. x 6 In. cobalt M42 jobber-length bit with 8% cobalt, a surface-hardened tip and a three-flat shank, listed for stainless steel, cast iron and titanium.

Pros

  • Cobalt M42 with 8% cobalt, listed for stainless steel, cast iron and titanium
  • Maker states 10x life vs. standard bits
  • High-heat resistant, with a thick web-helix design
  • Split point and three-flat shank on a 1/2 In. bit

Cons

  • 1 bit only, not a set
  • Warranty states Product Defects Only, with no term
  • No weight stated
  • 1 size only, 1/2 In., no range of sizes
BOSCH CO2135B 1-Piece 1/8 In. x 2-3/4 In. Cobalt

BOSCH CO2135B 1-Piece 1/8 In. x 2-3/4 In. Cobalt

Bosch9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/8 In. x 2-3/4 In. cobalt M42 jobber-length bit with 8% cobalt and a surface-hardened tip, listed for stainless steel, cast iron and titanium.

Pros

  • Cobalt M42 with 8% cobalt, listed for stainless steel, cast iron and titanium
  • Maker states 10x life vs. standard bits
  • Split point on a 1/8 In. bit for easy starts with no skating
  • Stated weight of 0.04 lb

Cons

  • 1 bit only, not a set
  • Warranty states Product Defects Only, with no term
  • Three-flat shank applies to bits 3/16 In. and larger, so not on this 1/8 In. bit
  • One size only, 1/8 In.
Step Drill Bit Set - 5PCS Titanium HSS Step Bit

Step Drill Bit Set - 5PCS Titanium HSS Step Bit

SEDIANAS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece titanium HSS step bit set with 50 sizes from 1/16 In. to 1-3/8 In., a 118° split point tip and two spiral flutes, for metal, aluminum, wood and plastic.

Pros

  • 50 sizes in 5 pieces, from 1/16 In. to 1-3/8 In.
  • 118° split point tip, self-centering, prevents walking
  • Two spiral flutes clear chips faster
  • Titanium coating, heat, corrosion and rust resistant

Cons

  • Not recommended for stainless steel or harder metal
  • No warranty term stated
  • No weight stated
  • No shank type stated
19 Pcs Hex Shank Drill Bit Set, 1/16"-1/4"

19 Pcs Hex Shank Drill Bit Set, 1/16"-1/4"

AUYAARS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 19-piece HSS titanium twist bit set from 1/16 In. to 1/4 In. with a 135° split point and a 1/4 In. hex shank, for wood, sheet metal, mild carbon steel, aluminum and plastic.

Pros

  • 19 pieces with 13 small diameters from 1/16 In. to 1/4 In.
  • 135° split point, self-centering, prevents walking without a pilot hole
  • 1/4 In. hex shank fits quick-change chucks and impact drivers
  • Indexed case with clear markings

Cons

  • No warranty term stated
  • Stainless steel is not among the listed materials
  • Largest size is 1/4 In.
  • No weight stated

Other welders and gear to compare

Side by side

Bosch CO2159B Cobalt M42 Bosch CO2135B Cobalt M42 SEDIANAS Titanium HSS Step Set AUYAARS HSS Titanium Twist Set
Gear Score 59 58 57 55
Side Cobalt drill bit Cobalt drill bit HSS HSS
Material Cobalt M42, 8% cobalt Cobalt M42, 8% cobalt Titanium HSS, 4241 4241 HSS, titanium coating
Sizes 1/2 In. x 6 In. 1/8 In. x 2-3/4 In. 50 sizes, 1/16 In. to 1-3/8 In. 19 pieces, 1/16 In. to 1/4 In.
Point Split point Split point 118° split point 135° split point
Shank Three-flat Not stated for 1/8 In. Not stated 1/4 In. hex
Listed for Stainless steel, cast iron, titanium Stainless steel, cast iron, titanium Metal, aluminum, wood, plastic Wood, sheet metal, mild carbon steel, aluminum, plastic
Weight Not stated 0.04 lb Not stated Not stated
Warranty Product Defects Only Product Defects Only Not stated Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 13 November 2026. No listing here states a safety certification, and no listing states a warranty term with a length.

Hss vs cobalt drill bit: the materials

The HSS side is high-speed steel with a titanium coating. The AUYAARS listing states 4241 high speed steel with a titanium coating, and the SEDIANAS listing calls its bits titanium HSS. The cobalt side is M42 with 8% cobalt in both Bosch listings, and Bosch states 10x life vs. standard bits for the M42 alloy. Neither HSS listing states a cobalt content, and neither cobalt listing states a titanium coating, so the two sides differ in the metal itself, not just the label.

Sizes and shanks

The SEDIANAS step set covers 50 sizes from 1/16 In. to 1-3/8 In. in 5 pieces, so one bit drills many hole sizes. The AUYAARS twist set covers 1/16 In. to 1/4 In. in 19 pieces, with 13 small diameters and six high-frequency sizes that include backup pieces. The Bosch bits are 1-piece bits: the CO2159B is 1/2 In. x 6 In. and the CO2135B is 1/8 In. x 2-3/4 In. The AUYAARS set has a 1/4 In. hex shank for quick-change chucks, and the Bosch listings state a three-flat shank on bits 3/16 In. and larger, which covers the 1/2 In. bit and not the 1/8 In. bit. The SEDIANAS listing states no shank type.

Points and flutes

The SEDIANAS step bits have a 118° split point tip with two spiral flutes, and the listing states the tip is self-centering, prevents walking and clears chips faster. The AUYAARS twist bits have a 135° split point that is self-centering and prevents walking without a pilot hole, with spiral flutes that clear chips to reduce heat, friction and chatter. The Bosch listings state split points on bits 1/8 In. and larger for easy starts with no skating and no center punch. Both Bosch bits carry that split point, since the smaller one is 1/8 In. and the larger one is 1/2 In.

What each side drills

The HSS side covers soft and thin material. The SEDIANAS set is listed for metal, aluminum, wood and plastic, and the listing states it is not recommended for stainless steel or any harder metal. The AUYAARS set is listed for wood, plywood, fiberboard, sheet metal, mild carbon steel, aluminum, PVC and plastic. The cobalt side covers hard metal. Both Bosch bits are listed for stainless steel, cast iron, titanium, light-gauge metal and aluminum. A bit that drills sheet metal can still be the wrong pick for stainless steel, so match the listing to the metal before you buy.

Heat and life claims

Heat is where the cobalt listings make their case. Both Bosch listings state high-heat resistance for extended periods, a thick web-helix design for stability in tough applications, and a surface-hardened tip that penetrates tough abrasive materials. Both state 10x life vs. standard bits for the 8% cobalt M42 alloy. The HSS side makes smaller claims: the SEDIANAS coating is stated as heat, corrosion and rust resistant, and the AUYAARS edges are stated as hardened and honed to stay sharp through repeated household and workshop use. Treat the 10x figure as a maker claim, not a measured result.

Warranty

No listing here states a warranty term with a length, so every product scores 0 for warranty. Both Bosch listings state Product Defects Only. The SEDIANAS and AUYAARS listings state no warranty term, so compare these 4 bits on materials, sizes and stated life, not on warranty.

Choose the HSS side if

  • You drill sheet metal, aluminum, wood or plastic.
  • You want 50 sizes in 5 step bits, or 19 twist bits in an indexed case.
  • You want a hex shank that fits an impact driver.
  • You do home repair and woodworking, not stainless steel.

Choose the cobalt side if

  • You drill stainless steel, cast iron or titanium.
  • You want one bit in 1/2 In. or 1/8 In. for a hard metal.
  • You want the 10x life claim and high-heat resistance the Bosch listings state.
  • You want a surface-hardened tip for tough abrasive materials.

Before You Strike an Arc

  • Wear eye protection and clamp the work before the bit turns.
  • Keep gloves away from rotating parts, and let a hot bit cool before you touch it.
  • Check the bit seats fully in the chuck, and check the shank matches the chuck.
  • Check the listing for the metal before you drill stainless steel or titanium.

See the OSHA welding overview and our Safety Disclaimer.

FAQ for welders

Can HSS drill bits drill stainless steel?

The HSS listings here do not list stainless steel as a material. The SEDIANAS listing states the set is not recommended for stainless steel or any harder metal. The Bosch cobalt M42 bits are listed for stainless steel, so pick the cobalt side for that metal.

What does 8% cobalt mean in a drill bit?

The Bosch listings state the M42 alloy contains 8% cobalt. The same listings state 10x life vs. standard bits and high-heat resistance for the cobalt bits. The HSS listings state no cobalt content.

What sizes do the HSS sets cover?

The SEDIANAS step set covers 50 sizes from 1/16 In. to 1-3/8 In. in 5 pieces. The AUYAARS twist set covers 1/16 In. to 1/4 In. in 19 pieces, with 13 small diameters and six high-frequency sizes that include backup pieces.

Do the cobalt bits need a center punch to start?

No. The Bosch listings state split points on bits 1/8 In. and larger allow easy starts with no skating, with no center punch needed. Both Bosch bits here carry a split point, since the smaller one is 1/8 In. and the larger one is 1/2 In.

Which side should I pick for sheet metal?

The HSS side. The SEDIANAS step set is listed for sheet metal, and the AUYAARS set lists sheet metal among its materials. The cobalt bits are listed for light-gauge metal too, so the HSS side covers more sizes, while the cobalt side covers harder metals.

Related: cobalt vs HSS drill bits for steel, 118 vs 135 degree drill bit, titanium vs black oxide drill bits, and best cobalt drill bit set. Also see our carbide vs cobalt drill bits and the drilling and tapping hub.

Scoring, line by line

All 4 bits are scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Bosch CO2159B Cobalt M42 9.6 30 21 20 n/a 0
Bosch CO2135B Cobalt M42 9.6 29 21 20 n/a 0
SEDIANAS Titanium HSS Step Set 9.6 28 20 21 n/a 0
AUYAARS HSS Titanium Twist Set 9.5 27 20 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides

Metal Fab Tools ·

Best Cobalt Drill Bit Set (2026)

Cobalt drill bit sets compared for hard metal work, with stated cobalt grades, size ranges and cases.