Best Drill Bit to Drill Hardened Steel (2026): 5 Picks Compared
5 cobalt and HSS drill bits compared by material, coating, point, shank and size, from a single TiAlN-coated bit to a 99-piece set.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCOMOWARE M35 Cobalt 99-Piece9.7/10View on Amazon - 2
Best Single BitOSTTE M35 Cobalt 3/4 Inch9.6/10View on Amazon - 3
Best Stubby SetEZARC M35 Cobalt Stubby Set9.6/10View on Amazon - 4
Best 3-PackNarwhal M35 Cobalt 3-Pack9.6/10View on Amazon - 5
Best Long BitsNEIKO M2 HSS Extra Long Set9.4/10View on Amazon
A hardened bolt snaps off flush in a bracket, and the best drill bit to drill hardened steel is the one that bites instead of skating across the surface. We compared cobalt and HSS bits by material, coating, point and shank, from a single coated bit to a full set.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall COMOWARE M35 Cobalt 99-Piece: 99-piece M35 cobalt set from 1/16 to 3/8 inch, with a 135° split point Check price on Amazon
- Best Single Bit OSTTE M35 Cobalt 3/4 Inch: Single 3/4 inch M35 cobalt bit with a TiAlN coating, 89 HRC surface hardness Check price on Amazon
- Best Stubby Set EZARC M35 Cobalt Stubby Set: Stubby 8-piece M35 cobalt set with an AlTiN coating and a self-centering tip Check price on Amazon
- Best 3-Pack Narwhal M35 Cobalt 3-Pack: 3-pack of 3/4 inch M35 cobalt bits, rated for hardened steel up to 40 HRC Check price on Amazon
- Best Long Bits NEIKO M2 HSS Extra Long Set: 5-piece M2 HSS set of 12-inch bits from 1/8 to 3/8 inch, for deep reach Check price on Amazon
The machines

COMOWARE M35 Cobalt Drill Bit Set for Hardened
A 99-piece M35 cobalt set from 1/16 to 3/8 inch with a 135° split point, for hardened metal and stainless steel.
Pros
- 99 pieces from 1/16 to 3/8 inch cover most drill sizes
- M35 cobalt steel for heat and wear resistance
- 135° split point prevents walking on hard surfaces
- Partitioned case with a clear size index keeps bits organized
Cons
- 99 pieces is more than a single job needs
- Largest bit is 3/8 inch, so no 3/4 inch holes
- No warranty term is stated
- Drill bits only, no countersink or screwdriver bits

3/4 Inch Industrial Grade M35 Cobalt Drill Bit
A single 3/4 inch M35 cobalt bit with a TiAlN coating and a 135° split point, for hardened steel, stainless steel and other hard metal.
Pros
- M35 cobalt with 5% cobalt for heat resistance and edge strength
- TiAlN coating lifts surface hardness to 89 HRC
- 135° split point centers the bit and cuts walking
- 3-flat 1/2 inch shank grips tighter than a round shank
Cons
- Single bit, not a set
- 3/4 inch size suits large holes, not small ones
- No warranty term is stated
- 1/2 inch shank needs a drill with a 1/2 inch chuck

EZARC M35 Cobalt Stubby Drill Bit Set for Hard
A stubby 8-piece M35 cobalt set with an AlTiN coating and a self-centering tip, for hard metal in tight spaces.
Pros
- M35 cobalt with AlTiN coating for hardness, heat and wear resistance
- Self-centering tip bites fast and cuts bit walking
- Stubby profile reaches tight spaces
- 3-in-1 set adds a countersink and screwdriver bits
Cons
- Stubby bits suit tight spaces, not deep holes
- Only 5 drill bits in the set
- Set is for metal, not wood or plastic
- Countersink and screwdriver bits add pieces, not drill sizes

Narwhal 3/4" Drill Bit (3 Pack - 1/2 Inch Shank)
A 3-pack of 3/4 inch M35 cobalt bits with a 135° split point, for hardened steel up to 40 HRC.
Pros
- M35 cobalt with 5% cobalt for hardened steel up to 40 HRC
- 135° split point for repeated holes in hard material
- 3-pack of 3/4 inch bits with a plastic storage case
- Fully ground for a precise drilling diameter
Cons
- 3-pack is all 3/4 inch bits, no other sizes
- 3/4 inch size suits large holes, not small ones
- Rated for hardened steel up to 40 HRC, not harder steel
- 1/2 inch shank needs a drill with a 1/2 inch chuck

NEIKO 10047A Extra Long Drill Bit Set | 5-Piece
A 5-piece M2 HSS set of 12-inch bits from 1/8 to 3/8 inch, for metal, wood, plastic and PVC.
Pros
- 12-inch length gives added length for deep holes
- Heat-treated M2 HSS for hardness, wear resistance and toughness
- 5 sizes from 1/8 to 3/8 inch in one set
- Works on metal, wood, plastic and PVC
Cons
- M2 HSS is a general-purpose steel, not a cobalt steel for hardened metal
- 12-inch length suits deep reach, not tight spaces
- Sharp pointed tips, not a split point for centering
- 5 sizes only, from 1/8 to 3/8 inch
Other welders and gear to compare
HIDOTOL 13 PCS Cobalt Drill Bit Set M35 HSS Twist Drill BitsCheck price on Amazon
NordWolf 5-Piece M35 Cobalt Stubby Drill Bit SetCheck price on Amazon
Crosstar 21Pcs M35 Cobalt Drill Bit SetCheck price on Amazon
Carbide Drill Bit Set : 1/16 3/16 1/8 1/4 for Hardened SteelCheck price on Amazon
1/8 Carbide Drill Bit : Max 700 Holes For Hardened &Check price on Amazon
Spec sheet comparison
| Drill Bit | Gear Score | Material | Size | Point | Shank | Pack |
|---|---|---|---|---|---|---|
| COMOWARE M35 Cobalt 99-Piece | 9.7/10 | M35 cobalt | 1/16 to 3/8 in | 135° split point | Tri-flat | 99 |
| OSTTE M35 Cobalt 3/4 Inch | 9.6/10 | M35 cobalt | 3/4 in | 135° split point | 3-flat 1/2 in | 1 |
| EZARC M35 Cobalt Stubby Set | 9.6/10 | M35 cobalt | 1/8 to 3/8 in | Self-centering tip | 1/4 in hex | 8 |
| Narwhal M35 Cobalt 3-Pack | 9.6/10 | M35 cobalt | 3/4 in | 135° split point | 1/2 in | 3 |
| NEIKO M2 HSS Extra Long Set | 9.4/10 | M2 HSS | 1/8 to 3/8 in | Sharp pointed tips | Not stated | 5 |
Ratings in this table are the makers’ own claims taken from each product page (15 November 2026).
Buying guide: best drill bit to drill hardened steel
M35 cobalt or M2 HSS
M35 cobalt is the steel for hardened metal. The OSTTE, COMOWARE, EZARC and Narwhal bits are all M35 cobalt, while the NEIKO set is M2 HSS. COMOWARE states that M35 cobalt offers superior heat and wear resistance compared to standard HSS, which is what the NEIKO uses. For hardened steel, pick a cobalt bit.
Coating and point
The OSTTE TiAlN coating lifts surface hardness to 89 HRC, and the EZARC AlTiN coating adds hardness, heat resistance and wear resistance. A 135° split point centers the bit and cuts walking: the OSTTE, COMOWARE and Narwhal bits all list one, while the EZARC uses a self-centering tip. The same bits drill stainless steel, as our drill bits for drilling stainless steel guide shows.
Shank and chuck fit
Match the shank to your drill. The Narwhal and OSTTE bits use a 1/2 inch shank, and the EZARC uses a 1/4 inch hex shank for drills and impact drivers. The COMOWARE set mixes round and tri-flat shanks. Check the shank against your chuck before ordering.
Size and set
Pick the size for the hole. The Narwhal and OSTTE bits are 3/4 inch, for large holes. The COMOWARE set runs from 1/16 to 3/8 inch, and the EZARC and NEIKO sets run from 1/8 to 3/8 inch. A set covers more sizes than a single bit. For a full set, see our drill bit set for metal guide.
Before You Strike an Arc
- Check the shank against your chuck: the Narwhal and OSTTE bits use a 1/2 inch shank.
- Check the bit size against the hole: the Narwhal and OSTTE bits are 3/4 inch.
- Keep the bits in the storage case between jobs, so the sizes stay sorted.
- Wear eye protection and clamp the work, and keep gloves away from rotating parts.
FAQ for welders
What is the best drill bit material for hardened steel?
M35 cobalt. The OSTTE, COMOWARE, EZARC and Narwhal bits are all M35 cobalt, while the NEIKO set is M2 HSS.
Can a regular drill bit drill hardened steel?
A cobalt bit is the pick for hardened steel. The NEIKO set is M2 HSS for general metalwork, and it does not list a cobalt grade or a split point.
What does a 135° split point do?
It centers the bit and cuts walking on hard surfaces. The OSTTE, COMOWARE and Narwhal bits all list a 135° split point. The EZARC uses a self-centering tip for the same job.
Do I need a drill press to drill hardened steel?
No. The OSTTE bit suits standard drill drivers and drill presses, and the EZARC hex shank fits drills and impact drivers. Clamp the work before drilling.
What size drill bit do I need for hardened steel?
Match the bit to the hole. The Narwhal and OSTTE bits are 3/4 inch, for large holes. The COMOWARE set runs from 1/16 to 3/8 inch.
Related: drill bit for drilling metal, drill press safety, and the metal fab tools hub.
Scoring, line by line
Each bit is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Drill bits have no safety listing to state, so no safety points were given; the ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| COMOWARE M35 Cobalt 99-Piece | 9.7 | 32 | 21 | 22 | n/a | 0 |
| OSTTE M35 Cobalt 3/4 Inch | 9.6 | 33 | 22 | 18 | n/a | 0 |
| EZARC M35 Cobalt Stubby Set | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Narwhal M35 Cobalt 3-Pack | 9.6 | 30 | 21 | 19 | n/a | 0 |
| NEIKO M2 HSS Extra Long Set | 9.4 | 23 | 18 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




