Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bit for Drilling Metal: 5 Cobalt and Titanium Sets

Five M35 cobalt and titanium HSS drill bit sets for metal, scored on what each maker states.

Best Drill Bit for Drilling Metal: 5 Cobalt and Titanium Sets
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sinyeenglon Hex ShankBest OverallSinyeenglon Hex Shank9.7/10View on Amazon
  2. 2SEDIANAS Cobalt SetBest Cobalt SetSEDIANAS Cobalt Set9.6/10View on Amazon
  3. 3WORKPRO Titanium SetWidest Size RangeWORKPRO Titanium Set9.6/10View on Amazon
  4. 4HIDOTOL Cobalt SetSolid Cobalt PickHIDOTOL Cobalt Set9.6/10View on Amazon

A drill bit that skates across the steel instead of biting in wastes the hole and the afternoon. The best drill bit for drilling metal is a cobalt set with a split point that starts on center and clears chips without cooking the edge. Several sets here claim that job, from M35 cobalt sets to a titanium set with a hex shank, and the scores below come from what each maker states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Sinyeenglon Hex Shank: M35 cobalt, a hex shank that will not break loose, hardness up to 67 and a stated life up to 12 times an average HSS titanium coated bit. Check price on Amazon
  • Best Cobalt Set SEDIANAS Cobalt Set: M35 cobalt with 5% cobalt, a 135 degree split point and a fully ground twist, in an orange case with a size index. Check price on Amazon
  • Widest Size Range WORKPRO Titanium Set: A 9-piece titanium HSS set from 1/16 to 3/8 inch on a 1/4 inch hex shank, the only set here that reaches 3/8 inch. Check price on Amazon
  • Solid Cobalt Pick HIDOTOL Cobalt Set: M35 cobalt with 5% cobalt, a 135 degree split point and a fully ground twist, in a rose case with a size index holder. Check price on Amazon

The machines

Sinyeenglon Hex Shank Cobalt Drill Bit Set

Sinyeenglon Hex Shank Cobalt Drill Bit Set

Sinyeenglon9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 cobalt set, 1/16 to 1/4 inch, on a 1/4 inch hex shank, with hardness up to 67 and an index holder.

Pros

  • M35 cobalt with hardness up to 67, for hard metals
  • 1/4 inch hex shank will not break loose from the base
  • Stated life up to 12 times an average HSS titanium coated bit
  • 5 times higher torque than the old hex shank, per the maker

Cons

  • No warranty term is stated
  • 13 sizes only reach 1/4 inch, with no larger size
  • Maker states a high cost for the set
  • Hex shank advantage matters most on an impact driver
Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 cobalt set, 1/16 to 1/4 inch, with a 135 degree split point and a fully ground twist, in an orange case.

Pros

  • M35 cobalt with 5% cobalt for heat resistance and hardness
  • 135 degree split point, self-centering to prevent walk-off
  • Fully ground twist clears particles faster for cooler drilling
  • Orange plastic case with a size index for storage

Cons

  • No warranty term is stated
  • 13 sizes only reach 1/4 inch, with no larger size
  • Round straight shank, with no hex grip for impact drivers
  • Plastic case, not metal
HIDOTOL 13 PCS Cobalt Drill Bit Set M35 HSS Twist

HIDOTOL 13 PCS Cobalt Drill Bit Set M35 HSS Twist

HIDOTOL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 cobalt set, 1/16 to 1/4 inch, with a 135 degree split point and a fully ground twist, in a rose case.

Pros

  • M35 cobalt with 5% cobalt for extended tool life
  • 135 degree split point, self-centering to prevent walking
  • Fully ground twist clears particles faster for cooler drilling
  • Rose plastic case with a size index holder

Cons

  • 13 sizes only reach 1/4 inch, with no larger size
  • Round straight shank, with no hex grip for impact drivers
  • Plastic case, not metal
  • Jobber length only, with no short or long bits in the set
M35 Cobalt Drill Bit Set, 13-Piece

M35 Cobalt Drill Bit Set, 13-Piece

WildBossy9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 cobalt set, 1/16 to 1/4 inch, with a 135 degree split point, fully ground flutes and a gold oxide finish, in an indexed case.

Pros

  • M35 cobalt with 5% cobalt for wear and heat resistance
  • 135 degree split point helps reduce bit walking
  • Fully ground flutes move chips away from the cutting edge
  • Gold oxide finish distinguishes the bits

Cons

  • 13 sizes only reach 1/4 inch, with no larger size
  • Round straight shank, with no hex grip for impact drivers
  • Not designed for glass, ceramic tile, concrete or masonry
  • Needs a slower speed and cutting oil on harder metals
WORKPRO 9-Piece Titanium HSS Drill Bit Set

WORKPRO 9-Piece Titanium HSS Drill Bit Set

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9-piece titanium HSS set, 1/16 to 3/8 inch, with a 135 degree split point on a 1/4 inch hex shank for quick change.

Pros

  • Widest size range here, 1/16 to 3/8 inch
  • 1/4 inch hex shank for quick change in impact drivers
  • 135 degree split point tip allows fast cutting
  • Titanium plating gives high hardness and durability

Cons

  • Titanium HSS, not M35 cobalt, for the hardest metals
  • 9 pieces, fewer than the 13-piece sets
  • Cannot be used for masonry construction materials
  • Smaller bits use a stamped locking chunk, not a full ground chunk

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Material Size range Point Shank Pieces
Sinyeenglon Hex Shank 9.7/10 M35 cobalt 1/16-1/4 in Not stated 1/4 in hex 13
SEDIANAS Cobalt Set 9.6/10 M35 cobalt 1/16-1/4 in 135 degree split Round straight 13
HIDOTOL Cobalt Set 9.6/10 M35 cobalt 1/16-1/4 in 135 degree split Round straight 13
WildBossy Cobalt Set 9.6/10 M35 cobalt 1/16-1/4 in 135 degree split Round straight 13
WORKPRO Titanium Set 9.6/10 Titanium HSS 1/16-3/8 in 135 degree split 1/4 in hex 9

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 15 November 2026.

What makes the best drill bit for drilling metal

Material

Four sets here are M35 cobalt, and three of them state 5% cobalt. The WORKPRO set is titanium HSS. The M35 sets name stainless steel and cast iron as their ground, while the WORKPRO set names wood, PVC, copper, aluminum alloy and stainless steel. For hardened metal, the M35 cobalt sets state the stronger case.

Point angle

Four sets here state a 135 degree split point, and the Sinyeenglon set does not state one. The split point is self-centering and helps prevent walk-off, so the bit starts on center instead of skating across the metal. A centre punch is recommended for greater accuracy on flat metal. See the types of drill bit guide for the difference.

Shank

Two sets here use a 1/4 inch hex shank, the Sinyeenglon and the WORKPRO, and three use a round straight shank. The hex shank will not break loose from the base on the Sinyeenglon set, and the WORKPRO set fits power screwdrivers and impact drivers for quick change. The round shank sets fit keyed and keyless drill chucks, drill presses and bench drills.

Size range

Four sets here cover 1/16 to 1/4 inch in 13 sizes, and the WORKPRO set covers 1/16 to 3/8 inch in 9 sizes. The 13-piece sets pack more sizes into a narrower range, while the WORKPRO set reaches the largest size here. Pick the range that covers the holes you drill most.

Before You Strike an Arc

  • Clamp the work before you drill, and wear eye and face protection; no gloves near rotating parts.
  • Check the case on arrival: count the bits against the size index and confirm the sizes run 1/16 to 1/4 inch, or 1/16 to 3/8 inch for the WORKPRO set.
  • Run a slower speed on harder metals and use cutting oil to control heat.
  • Use a centre punch for greater accuracy on flat metal.
  • Keep the bits in the indexed case so the sizes stay in order.

FAQ for welders

What is the best drill bit for drilling metal?

For hardened metal, the M35 cobalt sets here state the stronger case, with the Sinyeenglon set on top for its hex shank and stated hardness up to 67. The WORKPRO titanium set covers the widest size range, to 3/8 inch, but it is titanium HSS, not M35 cobalt. Pick M35 cobalt for stainless steel and cast iron, and the WORKPRO set for general metal work with a quick-change shank.

Can these drill bits drill stainless steel?

Yes. The M35 cobalt sets name stainless steel as their ground, and the WORKPRO set lists stainless steel among its materials. Run a slower speed on harder metals and use cutting oil to control heat.

What size drill bits do I need for metal?

The four 13-piece sets cover 1/16 to 1/4 inch, and the WORKPRO set covers 1/16 to 3/8 inch. The 13-piece sets give a finer step between sizes, while the WORKPRO set reaches the largest size here. Pick the range that covers the holes you drill most.

Do I need a hex shank or a round shank?

The Sinyeenglon and WORKPRO sets use a 1/4 inch hex shank, which suits impact drivers and quick change. The other three sets use a round straight shank, which fits keyed and keyless drill chucks, drill presses and bench drills. Pick the shank that fits the tool you drill with.

Can these bits drill masonry?

No. The WORKPRO set states it cannot be used for masonry construction materials, and the WildBossy set states it is not designed for glass, ceramic tile, concrete or masonry. Pick a material-specific bit for those surfaces.

Related: best cobalt drill bit set, best drill bit set for metal, best drill bits for steel, best drill bits for cast iron.

Scoring, line by line

We scored each set on performance, build, value, safety and warranty, using only the figures and claims each maker states. No set here states a safety certification or a warranty term, so every set scores zero on safety and warranty; the ranking comes from performance, build and value. The weights are published on our How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Sinyeenglon Hex Shank 9.7 32 22 21 n/a 0
SEDIANAS Cobalt Set 9.6 30 21 21 n/a 0
HIDOTOL Cobalt Set 9.6 30 21 21 n/a 0
WildBossy Cobalt Set 9.6 29 21 21 n/a 0
WORKPRO Titanium Set 9.6 27 20 21 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides