Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill for Titanium (2026): 4 Picks Compared

Four drill picks for titanium work, compared on the titanium use each maker states, cobalt against coated HSS, size spread, point style and warranty.

Best Drill for Titanium (2026): 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bosch CO2142 CobaltBest OverallBosch CO2142 Cobalt9.6/10View on Amazon
  2. 2DEWALT DW1369 29-PieceWidest Size SpreadDEWALT DW1369 29-Piece9.6/10View on Amazon
  3. 3Rocaris 8 Pack 3-10mmMetric PackRocaris 8 Pack 3-10mm9.4/10View on Amazon

Titanium work on the bench punishes the wrong bit fast. The metal grabs, the edge heats, and a bit made for soft stock goes dull before the hole is through. Fit up suffers when holes wander or tear, and rework on expensive stock is nobody’s idea of a good shift. The best drill for titanium in this guide is the bit whose maker actually names titanium as a use, and the rest of the picks show what coated sets do and do not claim.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Bosch CO2142 Cobalt: Cobalt bit whose maker lists titanium as a best use, stated to withstand up to 1,100 degreeF. Check price on Amazon
  • Widest Size Spread DEWALT DW1369 29-Piece: 29 piece set from 1/16 inch to 1/2 inch in a tough case, with a 30 Day Money Back Guarantee stated. Check price on Amazon
  • Metric Pack Rocaris 8 Pack 3-10mm: 8 pack from 3mm to 10mm with a 135 degree split point for thin board, wood and aluminum alloy. Check price on Amazon

The machines

BOSCH CO2142 1-Piece 15/64 In. x 3-7/8 In. Cobalt

BOSCH CO2142 1-Piece 15/64 In. x 3-7/8 In. Cobalt

Bosch9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cobalt bit in 15/64 inch by 3-7/8 inch size whose maker lists titanium among the metals it is best used for, with a rigid thick web and a surface hardened edge.

Pros

  • Maker lists titanium as a best use, alongside stainless steel and cast iron
  • Cobalt bit stated to withstand high temperature applications up to 1,100 degreeF
  • Rigid, thick web design stated to add stability in tough applications
  • Surface hardened to penetrate tough abrasive materials, in jobber length

Cons

  • Only the 15/64 inch by 3-7/8 inch size is covered, so other hole sizes need other bits
  • Sold as a 1 piece pack, so there is no spare in the box if an edge chips
  • No case or index is stated for storage between jobs
  • Full shank in jobber length suits a standard chuck and is not a hex shank bit
DEWALT Titanium Nitride Coated Drill Bit Set

DEWALT Titanium Nitride Coated Drill Bit Set

DEWALT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29 piece titanium nitride coated set from 1/16 inch to 1/2 inch with a pilot point, no spin shanks and a tapered web, supplied in a tough case.

Pros

  • Wide stated range from 1/16 inch to 1/2 inch in a 29 piece set
  • Titanium nitride coated pilot point stated for longer bit life and cleaner holes
  • No spin shanks and a tapered web stated to reduce breaking
  • Supplied in a tough case, with a 30 Day Money Back Guarantee stated

Cons

  • Maker does not list titanium metal among the stated uses for this set
  • Coating is titanium nitride on the bit, which is not the same as a cobalt bit
  • Point angle is not stated, so starting behavior beyond the pilot point claim is unclear
  • Set weight is stated at 3.0 pounds, heavier to carry than the smaller sets here
Rocaris 8 Pack 3-10mm Titanium Coated HSS Twist

Rocaris 8 Pack 3-10mm Titanium Coated HSS Twist

Rocaris9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 pack of titanium coated HSS twist bits from 3mm to 10mm with a 135 degree split point, straight shank and serrated side cutting edges.

Pros

  • Stated sizes 3mm, 4mm, 5mm, 6mm, 6.5mm, 7mm, 8mm and 10mm in an 8 pack
  • 135 degree split point with straight shank stated to prevent walking
  • Fully ground spiral groove stated to decrease friction and heat
  • Serrated side cutting design stated for continued horizontal drilling after breakthrough

Cons

  • Maker lists thin board, wood, aluminum alloy and plastic, with no stated titanium use
  • Titanium here is a coating on HSS, not a cobalt bit for titanium metal
  • No case is stated, so loose bits need their own storage
  • No heat limit is stated for sustained drilling in hard metal
AOKLIT 6 Pack Titanium Coated HSS Twist Drill Bit

AOKLIT 6 Pack Titanium Coated HSS Twist Drill Bit

AOKLIT9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 pack of titanium coated HSS twist bits from 3mm to 8mm with a 135 degree split point and serrated cutting edges for wood, metal and plastic holes.

Pros

  • Stated sizes 3mm, 4mm, 5mm, 6mm, 6.5mm and 8mm in a 6 pack
  • Titanium coating on HSS stated to keep edges sharper for longer
  • Fully ground spiral groove stated to minimize friction and heat
  • Sharp central serration stated to improve chip evacuation

Cons

  • Maker lists thin board, wood, aluminum alloy and plastic, with no stated titanium use
  • Narrower stated spread than the 8 pack and the 29 piece set here
  • No case is stated, so storage is left to the buyer
  • No heat limit is stated for sustained drilling in hard metal

Spec sheet comparison

Model Gear Score Material Sizes Point Stated titanium use Warranty
Bosch CO2142 Cobalt 9.6/10 Cobalt, surface hardened 15/64 inch x 3-7/8 inch Not stated Yes, listed by maker Not stated
DEWALT DW1369 29-Piece 9.6/10 Titanium nitride coated 1/16 inch to 1/2 inch Pilot point Not stated 30 Day Money Back Guarantee
Rocaris 8 Pack 3-10mm 9.4/10 HSS, titanium coated 3mm to 10mm 135 degree split point Not stated Not stated
AOKLIT 6 Pack 3-8mm 9.3/10 HSS, titanium coated 3mm to 8mm 135 degree split point Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (20 November 2026).

Buying guide: best drill for titanium

Stated titanium use comes before coating names

Read the use list, not just the coating. The Bosch CO2142 maker lists titanium among the metals the bit is best used for, alongside stainless steel and cast iron. The Rocaris and AOKLIT makers list thin board, wood, aluminum alloy, plastic and groove processing, and the DEWALT maker lists no material uses at all beyond longer bit life and cleaner holes. A titanium coating on HSS describes the bit surface; it does not state that the bit is rated for drilling titanium metal. Our titanium vs cobalt drill bits comparison covers that split in more depth, and the best drill bit for stainless steel metal guide shows how cobalt picks are stated for hard stock.

Cobalt against coated HSS

The Bosch bit is stated as cobalt with a surface hardened edge and a rigid, thick web. The other picks are stated as HSS with a titanium coating or a titanium nitride coating. That material gap is why the ranking puts the cobalt bit at the top for this keyword even though it covers the 15/64 inch by 3-7/8 inch size only. A set gives diameter choice; a cobalt bit gives the stated material match for titanium. Shops that drill titanium often will feel that trade on every hole, while shops that drill titanium rarely may accept a general set and replace edges more often. The HSS vs cobalt drill bit page lays out the same choice for general metal work.

Heat and chip evacuation

Only the Bosch maker states a heat figure: withstands high temperature applications for extended periods up to 1,100 degreeF. The Rocaris and AOKLIT makers state fully ground spiral grooves to decrease or minimize friction and heat, with serrations and long flutes for chip evacuation. The DEWALT maker states a tapered web to reduce breaking and a pilot point for cleaner holes. None of the coated sets states a heat limit, so sustained drilling in hard metal has no stated ceiling to work to. Keep feed steady, clear chips often, and let the bit cut rather than rub; rubbing builds heat without making hole progress. For fluid choices, see the best cutting oil for drilling metal guide.

Point style and starting the hole

The Rocaris and AOKLIT makers state a 135 degree split point to prevent walking and give rapid, precise starts. The DEWALT maker states a pilot point that starts on contact for cleaner holes. The Bosch maker states jobber length and a full shank, with no point angle given. On titanium, a wandering start scars the surface and throws hole position off, so clamp the work, mark the center, and start with light pressure until the point bites. A center mark matters more on hard stock than on soft stock, where the bit forgives a sloppy start.

Size spread against the job

The DEWALT set states the widest spread, from 1/16 inch to 1/2 inch across 29 pieces in a tough case. The Rocaris pack states 3mm, 4mm, 5mm, 6mm, 6.5mm, 7mm, 8mm and 10mm. The AOKLIT pack states 3mm, 4mm, 5mm, 6mm, 6.5mm and 8mm. The Bosch bit states the 15/64 inch by 3-7/8 inch size in a 1 piece pack. Match the stated spread to the holes you actually drill: a wide set that the maker does not rate for titanium still leaves the titanium job uncovered, while a stated titanium bit in the wrong diameter leaves the hole undrilled. Buy the diameter the job needs, in the material the maker rates for the stock.

Use as directed. Wear eye protection, clamp the work so it cannot spin, keep gloves and loose clothing away from rotating parts, and keep guards in place on drill presses. Stop the spindle before clearing chips or changing bits, and never exceed any stated limit on the bit or the machine. See the OSHA machine guarding guidance and our Safety Disclaimer.

Before You Strike an Arc

  • Confirm the diameter you need against the stated sizes before ordering, since the cobalt pick covers the 15/64 inch by 3-7/8 inch size only.
  • Check the shank style on arrival, because the AOKLIT maker gives hex shank and straight shank descriptions for the same pack.
  • Clamp titanium stock flat and mark hole centers, so the point starts where the fit up needs it.
  • Keep cutting fluid and a chip brush at the drill, and clear chips with the spindle stopped.
  • Store bits in a case or index where stated, and check edges on arrival for chips before the job starts.

FAQ for welders

What kind of bit does the maker rate for titanium here?

The Bosch CO2142 maker lists titanium as a best use for its cobalt bit, alongside stainless steel and cast iron. The coated HSS sets here list thin board, wood, aluminum alloy and plastic, with no stated titanium use. On stated facts, the cobalt bit is the pick for titanium stock.

Does a titanium coating mean the bit drills titanium?

No, not on the stated facts here. The Rocaris and AOKLIT makers describe HSS bits with a titanium coating for thin board, wood, aluminum alloy and plastic. The coating names the bit surface; the use list names the stock, and titanium metal is absent from those use lists.

What size is the cobalt pick?

The Bosch CO2142 is stated at 15/64 inch by 3-7/8 inch, in jobber length with a full shank, sold as a 1 piece pack. Other diameters need other bits, since no size range is stated for this model.

Which set gives the widest size spread?

The DEWALT DW1369 set states sizes from 1/16 inch to 1/2 inch across 29 pieces in a tough case. The Rocaris pack states 3mm to 10mm sizes and the AOKLIT pack states 3mm to 8mm sizes. Width alone does not make a set a titanium pick, since none of the sets states a titanium use.

What heat limit is stated?

Only the Bosch maker states a heat figure: withstands high temperature applications for extended periods up to 1,100 degreeF. The coated sets state groove designs to decrease friction and heat, with no stated heat limit.

Related: sheet metal and tube hub, best drill bit for stainless steel metal, titanium vs cobalt drill bits, HSS vs cobalt drill bit, best cobalt drill bit set, best cutting oil for drilling metal, drilling tips for metal, and best drill bit set for metal.

Scoring, line by line

Each bit or set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Drill bits have no electrical safety listing to state, so every pick here scores zero on that criterion; the ranking comes from the other four. Scores follow what each maker states: a stated titanium use, a stated heat limit and a stated size spread carry weight, while a coating name on its own does not.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Bosch CO2142 Cobalt 9.6 30 21 20 n/a 0
DEWALT DW1369 29-Piece 9.6 26 20 21 n/a 1
Rocaris 8 Pack 3-10mm 9.4 21 18 19 n/a 0
AOKLIT 6 Pack 3-8mm 9.3 20 18 18 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides