Best Drill for Metal (2026): 4 Cordless Picks
Cordless drills for metal, from a 12V compact to a 20V 354 in-lb driver, compared on torque, speed, chuck and the metal capacity each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDCA ADJZ20359.5/10View on Amazon - 2
Best 2-SpeedCOMOWARE 20V Drill9.4/10View on Amazon - 3
Lightweight PickAVID POWER 20V Drill9.4/10View on Amazon - 4
Best 12V PickFADAKWALT 12V Drill9.3/10View on Amazon
A bracket needs holes, a panel needs mounting, and the drill on the bench is either up to the metal or it is not. The best drill for metal is a cordless drill with enough torque, the right speed range and a chuck that holds the bit true, and this guide compares the cordless drills on what each listing states: torque, speed, chuck, metal capacity and weight.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall DCA ADJZ2035: The highest stated torque here at 354 in-lbs, two speeds to 1500 RPM, a 2.0Ah battery and a 25-piece kit. Check price on Amazon
- Best 2-Speed COMOWARE 20V Drill: A 20V drill with 266 in-lbs, two speeds, a 25+1 clutch, a 1500mAh battery and a storage case. Check price on Amazon
- Lightweight Pick AVID POWER 20V Drill: A 2.5 lb 20V drill with 280 in-lbs, a battery level display and 22 bits in the box. Check price on Amazon
- Best 12V Pick FADAKWALT 12V Drill: A compact 12V drill with 180 in-lbs, 21+1 torque settings and a brake for small metal jobs. Check price on Amazon
The machines

DCA Cordless Drill Set, 354 in-lbs Torque
A 20V cordless drill with 354 in-lbs of torque, two speeds to 1500 RPM, a 2.0Ah battery and a 25-piece kit, rated by the maker for metal to 2/5 inch.
Pros
- Highest stated torque here at 354 in-lbs
- 2 speeds, 0-400 and 0-1500 RPM, for driving and drilling
- 2.0Ah battery with 33% more run time than a 1.5Ah battery, per the listing
- 25-piece kit with 21 bits, a flexible shaft, battery and charger
Cons
- No warranty term is stated in the listing
- Heaviest listed weight among the 20V drills at 2.8 lb, against 2.5 lb for the AVID
- No battery level display is listed, unlike the AVID
- One battery only, so a flat battery stops the job

COMOWARE 20V Cordless Drill & Bits Set w/Charger
A 20V cordless drill with 266 in-lbs of torque, two speeds to 1300 RPM, a 25+1 clutch and a storage case with a bit set.
Pros
- 2 speeds, 0-350 and 0-1300 RPM, for screws and holes
- 25+1 clutch settings for driving control
- 1500mAh battery with a fast charger and a storage case
- LED work light and 3/8 inch keyless metal chuck
Cons
- Clutch is listed as 25+1 in one place and 17-torque in another
- Listed for light metal only, not heavy-duty work
- No warranty term is stated in the listing

AVID POWER 20V Cordless Drill Set for Home DIY
A lightweight 20V cordless drill with 280 in-lbs of torque, a battery level display, a 3/8 inch keyless chuck and 22 bits.
Pros
- 280 in-lbs of torque, above the COMOWARE at 266 in-lbs
- Lowest stated weight here at 2.5 lb
- Battery level display shows the charge in real time
- 22 bits in the box: 10 drill bits, 10 driver bits, flexible shaft and extension bar
Cons
- One speed range of 0-550 RPM, the slowest top speed here
- Not suitable for drill bits over 25mm, per the listing
- Not for concrete or masonry walls
- No warranty term is stated in the listing

FADAKWALT Cordless Drill Set,12V Power Drill Set
A compact 12V cordless drill with 180 in-lbs of torque, 21+1 torque settings, a 0-650 RPM range and an electric brake.
Pros
- Compact 12V size for tight spaces and light jobs
- 21+1 torque settings for fine control
- LED light and electric brake for precise work in dark areas
- Kit includes wood bits, masonry bits and screwdriver bits
Cons
- Lowest stated torque here at 180 in-lbs
- 12V, the lowest voltage here
- No weight is stated in the listing
- No warranty term is stated in the listing
Other welders and gear to compare
ZELCAN 10 Sizes Titanium Step Drill BitCheck price on Amazon
NEIKO 10185A Step Drill BitCheck price on Amazon
NEIKO 10194A Step Drill BitCheck price on Amazon
NEIKO 10182A Titanium Step Drill BitCheck price on Amazon
NEIKO 10184A Step Drill BitCheck price on Amazon
RCINDUSCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Voltage | Torque | Speeds | Chuck | Metal capacity | Weight |
|---|---|---|---|---|---|---|---|
| DCA ADJZ2035 | 9.5/10 | 20V | 354 in-lbs | 0-400, 0-1500 RPM | 3/8 in keyless | 2/5 in | 2.8 lb |
| COMOWARE 20V Drill | 9.4/10 | 20V | 266 in-lbs | 0-350, 0-1300 RPM | 3/8 in keyless | Light metal | 5.2 lb |
| AVID POWER 20V Drill | 9.4/10 | 20V | 280 in-lbs | 0-550 RPM | 3/8 in keyless | 3/8 in steel plate | 2.5 lb |
| FADAKWALT 12V Drill | 9.3/10 | 12V | 180 in-lbs | 0-650 RPM | 3/8 in keyless | Metal, no size stated | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 13 November 2026.
Buying guide: the best drill for metal
Torque
Torque decides whether the bit keeps turning in metal or stalls. The drills here state 180 to 354 in-lbs, with the DCA at the top and the FADAKWALT at the bottom. More torque helps on larger bits and thicker metal, but the listing figure is a maximum, not a promise at every speed. Check the metal capacity the listing states alongside the torque: the DCA lists metal to 2/5 inch, and the AVID lists steel plate to 3/8 inch.
Speed
Speed ranges here run from one 0-550 RPM range on the AVID to 2-speed ranges topping at 1500 RPM on the DCA and 1300 RPM on the COMOWARE. Low speed drives screws with control and starts holes without skating. High speed drills faster in thin metal. 2 speeds give more control than 1 speed, which is why the DCA and the COMOWARE score higher here.
Chuck and bits
All 4 drills here use a 3/8 inch keyless chuck, so the bit choice matters more than the chuck. The DCA kit holds 21 bits, the AVID holds 22 bits, the COMOWARE holds a bit set in a storage case, and the FADAKWALT holds wood bits, masonry bits and screwdriver bits. Check that the bits in the box cover metal: the COMOWARE lists HSS twist drill bits, which suit metal, while the FADAKWALT lists wood and masonry bits with no metal bit named.
Battery and weight
Batteries here are 20V on the DCA, COMOWARE and AVID, and 12V on the FADAKWALT, with capacities of 1500mAh on the COMOWARE and 2.0Ah on the DCA. The AVID and FADAKWALT state no capacity, so there is nothing to compare on run time for those two. Weights run from 2.5 lb on the AVID to 5.2 lb on the COMOWARE, and the FADAKWALT states no weight at all. A lighter drill tires the arm less on long jobs, and a heavier drill steadies the bit on thick metal.
What the listings leave out
No drill here states a warranty term, and none states a safety listing, so both criteria score zero across the board. The COMOWARE listing disagrees with itself on the bit count and the clutch, and the AVID listing disagrees on weight. Read the listing, not the headline, and check the figures that matter for the job before buying.
Use as directed. Wear eye protection and clamp the work before the bit spins. Keep gloves away from rotating parts, keep the chuck guard in place where fitted, and let the bit cool before handling it. See OSHA machine guarding guidance for the guard rules that cover drills, grinders and saws.
Before You Strike an Arc
- Charge the battery fully after it arrives, and recharge it every 3 months when the drill sits unused.
- Check the chuck size and the bit shank before the first hole: all 4 drills here take a 3/8 inch chuck.
- Clamp the work and wear eye protection, and keep gloves away from the spinning chuck.
- Check the bit count and clutch settings on arrival against the listing, since the COMOWARE listing disagrees with itself on both.
For more options, see our sheet metal tube guides.
FAQ for welders
What torque do I need to drill metal?
It depends on the bit size and the metal thickness, and the listings here state 180 to 354 in-lbs. The DCA at 354 in-lbs states the most torque here, and the FADAKWALT at 180 in-lbs states the least. Match the torque to the largest bit and the thickest metal on the job, and check the metal capacity the listing states.
Can a cordless drill drill through steel?
Yes, within the limits the listing states. The AVID lists steel plate to 3/8 inch, and the DCA lists metal to 2/5 inch. The COMOWARE lists light metal only, and the FADAKWALT lists metal with no size stated. Use a sharp HSS bit, low speed and steady pressure, and let the bit cut rather than forcing it.
What is the difference between 12V and 20V drills?
Voltage tracks the power class: the 12V FADAKWALT states 180 in-lbs, while the 20V drills here state 266 to 354 in-lbs. A 20V drill suits larger bits and thicker metal, and a 12V drill suits screws and light work in tight spaces. Pick by the largest job on the bench, not the smallest.
How many bits come with these drills?
The DCA kit holds 21 bits, the AVID holds 22 bits, and the FADAKWALT holds 3 wood bits, 3 masonry bits and 10 screwdriver bits. The COMOWARE title says 34pcs while the bullets say 23 Pcs, so count the bits on arrival. Check that the box holds metal bits before buying for metal work.
Do these drills come with a warranty?
No drill here states a warranty term in its listing. The COMOWARE listing says the maker stands behind the drill, and the FADAKWALT listing offers customer service, but neither states a term in years or months. Check the listing for the exact term before buying when a warranty matters.
Related: best twist drill bit set, best cobalt drill bit set, HSS vs cobalt drill bit and drill press speed chart by bit size. Also see our drilling set. Also see our tapping wrench. Also see our tapping gel. Also see our best oil for drilling metal. Also see our drilling tool for tight spaces.
More related guides (16)
- best tool belt for sheet metal workers
- drilling chuck
- best sheet metal screws
- best annular cutter set
- measuring tape measurements
- drilling and tapping chart
- how to insert a drill bit
- how thick is 18 gauge metal
- sheet metal weight calculator
- drill index with bits
- sheet metal screw assortment value kit 50 pack
- tapping vs thread milling
- cutting oil vs coolant
- best drill for titanium
- best drill for metal work
- best drill for drilling steel
Scoring, line by line
Each drill is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No drill here states a safety listing or a warranty term, so every drill scores zero on those two criteria, and the ranking comes from performance, build and value alone.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DCA ADJZ2035 | 9.5 | 32 | 21 | 21 | 0 | 0 |
| COMOWARE 20V Drill | 9.4 | 28 | 20 | 20 | 0 | 0 |
| AVID POWER 20V Drill | 9.4 | 27 | 20 | 20 | 0 | 0 |
| FADAKWALT 12V Drill | 9.3 | 23 | 18 | 18 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




