Best Sheet Metal Screw Assortment Kit (2026): 5 Picks for Sheet Metal Work
Five stainless sheet metal screw kits from 150 to 1200 pieces, compared on size range, head style, material and the warranty in writing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBNUOK 247-Piece Kit9.6/10View on Amazon - 2
Best Size RangeDIVANC 550-Piece Kit9.6/10View on Amazon - 3
Best ValueRuibapa 1200-Piece Kit9.6/10View on Amazon - 4
Best Self-DrillingVGBUY Self-Drilling Kit9.5/10View on Amazon
A bracket that needs fastening, a duct joint that needs closing, or a patch panel that needs holding in place all come down to the same thing: the right screw, in hand, before the job stalls. This guide compares sheet metal screw kits for that work, and names the best sheet metal screw assortment kit on size range, head style, material and the warranty in writing.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BNUOK 247-Piece Kit: 304 stainless steel, a stated 24-month warranty, and a deep cut Phillips drive, in a labeled case. Check price on Amazon
- Best Size Range DIVANC 550-Piece Kit: 550 pieces across 18 sizes from #4 to #12, in 304 stainless steel with threads stated to resist backing off under vibration. Check price on Amazon
- Best Value Ruibapa 1200-Piece Kit: 1200 pieces, round and flat heads from M3 to M6, in a sturdy box with a handle. Check price on Amazon
- Best Self-Drilling VGBUY Self-Drilling Kit: A drill-bit tip that needs no pilot hole, with a hex washer head, in 410 stainless steel. Check price on Amazon
The machines

BNUOK 247Pcs Pan Head Wood Screws Assortment Kit
A 247-piece kit of 304 stainless steel pan head screws in #6 and #8, with a stated 24-month warranty and a labeled case.
Pros
- 304 stainless steel with stated corrosion and rust resistance
- A stated 24-month warranty, the only written warranty in this guide
- Deep cut Phillips drive for a firm fit and less stripping
- Labeled case keeps the four sizes sorted and easy to reach
Cons
- Only #6 and #8 gauges, with no #4, #10 or #12 sizes
- 247 pieces is the second smallest count in this guide
- Pan head only, with no flat head option for flush work
- Longest screw is 1 inch, so no length above 1 inch

DIVANC 550Pcs 304 Stainless Steel Wood Screws
A 550-piece kit of 304 stainless steel pan head screws in 18 sizes from #4 to #12, with lengths from 1/4 inch to 1-1/2 inches.
Pros
- 18 sizes from #4 to #12, the widest gauge range in this guide
- 304 stainless steel with stated rust and oxidation resistance
- Threads stated to resist backing off after prolonged vibration
- 550 pieces with a sturdy case and size labels
Cons
- No warranty term is stated
- Pan head only, with no flat head option for flush work
- Phillips drive only, with no hex or square drive option
- No self-drilling tip is stated

1200 PCS Stainless Steel Wood Screws Assortment
A 1200-piece kit of stainless steel screws in metric sizes M3 to M6, with 605 round head and 595 flat head screws in a box with a handle.
Pros
- 1200 pieces, the largest count in this guide
- Both round head and flat head screws in one kit
- Metric range from M3 to M6 across many lengths
- Sturdy box with a handle that doubles as storage
Cons
- Metric sizes only, with no imperial gauges
- M3 screws are the smallest in this guide
- No self-drilling tip is stated
- Fixed split of 605 round head and 595 flat head screws, so a job needing mostly one style runs short on it

Dianrui 288 PCS Wood Screws Assortment Kit
A 288-piece kit of carbon steel screws in #4 to #10, with pan and flat heads and lengths from 3/8 inch to 2 inches.
Pros
- Lengths from 3/8 inch to 2 inches, the widest length range in this guide
- Both pan head and flat head screws in one kit
- Four gauges, #4, #6, #8 and #10, for small and mid size work
- Labeled plastic box for storage and easy size lookup
Cons
- Carbon steel rather than stainless steel
- No warranty term is stated
- Phillips drive only, with no hex or square drive option
- No self-drilling tip is stated

VGBUY Self Drilling Screws Assortment Kit
A 150-piece kit of 410 stainless steel self-drilling screws with a hex washer head, in #8 and #10, for metal-to-metal and metal-to-wood joints.
Pros
- Self-drilling tip stated to need no pilot hole
- Hex washer head with external hex drive for a strong hold
- 410 stainless steel with stated corrosion resistance and rustproofing
- Stated for metal roofing, HVAC and ductwork, and steel frames
Cons
- 150 pieces, the smallest count in this guide
- Only #8 and #10 gauges, in four sizes
- Hex drive needs a hex driver rather than a standard Phillips bit
- Smallest screw is 1/2 inch, so no shorter screw for thin sheet
Other welders and gear to compare
SATANTECH #8#10#14 Self Drilling Screws Assortment KitCheck price on Amazon
KURUI Self Tapping Screws Assortment KitCheck price on Amazon
SVLING Black Self Tapping Screws Assortment Kit 190PCSCheck price on Amazon
700Pcs 304 Stainless Steel Pop Rivets Kit with Washers 8-SizeCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Pieces | Sizes | Material | Head and drive | Warranty |
|---|---|---|---|---|---|---|
| BNUOK 247-Piece Kit | 9.6/10 | 247 | #6 and #8 | 304 stainless steel | Pan head, Phillips | 24 months |
| DIVANC 550-Piece Kit | 9.6/10 | 550 | #4 to #12, 18 sizes | 304 stainless steel | Pan head, Phillips | Not stated |
| Ruibapa 1200-Piece Kit | 9.6/10 | 1200 | M3 to M6 | Stainless steel | Round and flat head | Not stated |
| Dianrui 288-Piece Kit | 9.5/10 | 288 | #4 to #10 | Carbon steel | Pan and flat head, Phillips | Not stated |
| VGBUY Self-Drilling Kit | 9.5/10 | 150 | #8 and #10 | 410 stainless steel | Hex washer head | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 November 2026. Where a listing states a figure two ways, the table shows both.
Buying guide for the best sheet metal screw assortment kit
Size range and gauge
A sheet metal screw assortment value kit is judged first on the sizes it holds. The kits here run from #4 to #12 in gauge and from 1/4 inch to 2 inches in length, with the DIVANC kit covering the widest gauge range at #4 to #12 and the Dianrui kit covering the longest length at 2 inches. The Ruibapa kit works in metric sizes from M3 to M6, so match it to hardware that uses metric threads. Count the sizes a kit holds, not just the piece count: a kit with 1200 pieces in a few sizes stocks deep on those sizes, while a kit with 18 sizes stocks wide.
Head style and drive
Pan heads sit proud of the surface and suit brackets and general fastening, while flat heads sit flush and suit work where the head must not stand proud. The Dianrui and Ruibapa kits hold both head styles; the BNUOK and DIVANC kits hold pan heads only, and the VGBUY kit holds a hex washer head. Drive matters too: most kits here use a Phillips drive, while the VGBUY kit uses an external hex drive, so check the bit in the driver before starting.
Material
Three kits here list stainless steel: BNUOK and DIVANC list 304 stainless steel, and VGBUY lists 410 stainless steel, which the maker notes is magnetic. The Ruibapa kit lists stainless steel without a grade, and the Dianrui kit lists carbon steel. For damp or outdoor work, a stainless kit is the safer pick from the stated materials; for dry indoor work, the carbon steel kit still covers the same gauges.
Self-drilling or self-tapping
Only the VGBUY kit states a self-drilling tip, shaped like a drill bit, that lets the screw go in without a pilot hole. The other kits list self-tapping screws without stating a drill-bit tip. For thin metal work where drilling each hole first slows the job, the self-drilling kit saves a step; for wood and plastic, a self-tapping screw starts fine.
Warranty and what is in the box
Only one kit here states a warranty in writing: the BNUOK kit promises 24 months. The other four kits state no warranty term, so the written cover is a real difference between them. Four of the kits state a storage case or box, and the BNUOK and DIVANC cases state size labels, which matter when the kit holds many sizes.
Shop safety. Sheet metal edges cut, and drilling throws chips. Wear eye protection, clamp the work before drilling, keep gloves off near a spinning drill bit, and keep guards in place on the drill. Check the screw size against the sheet before driving it, and stop if the screw spins without biting: back it out and try the next size up.
Before You Strike an Arc
- Match the screw length to the stack being joined, so the tip does not poke through the far side.
- Check the head style and drive against the driver bit before starting.
- Sort the kit by size on arrival and check the case labels match the screws inside.
- Wear eye protection and clamp the work before drilling or driving.
- Keep the case closed between jobs so sizes do not mix.
FAQ for welders
Are sheet metal screws good for wood?
Yes, for light fastening. The BNUOK, Dianrui and VGBUY kits all state wood among their uses, and the DIVANC kit states wood and plastic. A sheet metal screw cuts its own thread, so it holds in wood. Match the gauge to the job: the #4 screws in the Dianrui and DIVANC kits suit small work, while the #10 and #12 screws suit heavier fastening.
Do sheet metal screws work in wood?
Yes. Four of the kits here state wood as a use, with the BNUOK kit stating wood projects and the Dianrui kit stating furniture maintenance and decoration. The screws are self-tapping, so they cut a thread as they drive. A pilot hole helps in hardwood, where a screw driven without one can split the wood.
How to fix loose sheet metal screws?
First check whether the hole has worn oversize: back the screw out and look at the hole. If the threads no longer bite, move to the next gauge up from the same kit, for example from a #6 to a #8 where the kit holds both. If no larger size is on hand, a longer screw of the same gauge can reach fresh material behind the hole.
How are sheet metal screws sized?
By gauge number and length. The kits here run from #4 to #12 in gauge, with lengths from 1/4 inch to 2 inches, and the Ruibapa kit uses metric sizes from M3 to M6 with lengths from 6 mm to 50 mm. Check the case label before picking a screw, since kits here hold many sizes that look alike.
How much is a bag of sheet metal screws?
The kits in this guide are sold by piece count rather than by the bag, and the counts here run from 150 pieces in the VGBUY kit to 1200 pieces in the Ruibapa kit. Compare the piece count and the sizes inside before choosing: the smallest kit here holds 150 pieces in 4 sizes, while the largest holds 1200 pieces.
Related: best sheet metal screws for single-size picks, best sheet metal tools, and the sheet metal and tubing hub. Also see how to remove a broken screw from metal. Also see best screw extractor. Also see sheet metal weight calculator.
Scoring, line by line
Each kit is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BNUOK 247-Piece Kit | 9.6 | 29 | 21 | 20 | n/a | 3 |
| DIVANC 550-Piece Kit | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Ruibapa 1200-Piece Kit | 9.6 | 28 | 20 | 22 | n/a | 0 |
| Dianrui 288-Piece Kit | 9.5 | 28 | 19 | 20 | n/a | 0 |
| VGBUY Self-Drilling Kit | 9.5 | 27 | 20 | 18 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




