Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Sheet Metal Screws (2026): 5 Picks for Gutters, Roofing and Shop Work

Five sheet metal screws for gutters, roofing and shop work, compared on size, head style, material, washer and pack size.

Best Sheet Metal Screws (2026): 5 Picks for Gutters, Roofing and Shop Work
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1mxuteuk #8 5-Size KitBest Overallmxuteuk #8 5-Size Kit9.7/10View on Amazon
  2. 2Wensilon #8 Hex Washer 300-PackBest Bulk PackWensilon #8 Hex Washer 300-Pack9.7/10View on Amazon
  3. 3SVLING #8 Gutter ScrewsBest for GuttersSVLING #8 Gutter Screws9.6/10View on Amazon
  4. 4kvohlum #10 Roofing ScrewsBest for Roofingkvohlum #10 Roofing Screws9.5/10View on Amazon

A gutter elbow that works loose in a storm, a downspout seam that gaps, a patch panel on a trailer that needs fastening before the rain comes: sheet metal work is full of small joints that have to hold. The best sheet metal screws for the job are the ones that match the metal, the head and the length, and this roundup compares the packs on what each listing states: size, head style, material, washer and pack count.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall mxuteuk #8 5-Size Kit: Five #8 lengths from 1/2 to 1-1/4 inch, 115 screws with 115 matching rubber washers, 410 stainless steel, in a clear storage box. Check price on Amazon
  • Best Bulk Pack Wensilon #8 Hex Washer 300-Pack: 300 hex washer head self-drilling screws in #8 x 3/4 inch, 410 stainless steel, with an extra socket bit adapter in each order. Check price on Amazon
  • Best for Gutters SVLING #8 Gutter Screws: 110 #8 x 1/2 inch hex washer head screws in 410 stainless steel, with a 1/4 inch socket bit included, made for gutter elbows and downspouts. Check price on Amazon
  • Best for Roofing kvohlum #10 Roofing Screws: 50 #10 x 3/4 inch hex head screws with an EPDM rubber washer on each screw, made for metal roofing and thin metal panels. Check price on Amazon

The machines

mxuteuk 230PCS #8 Self Tapping Screws

mxuteuk 230PCS #8 Self Tapping Screws

mxuteuk9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 230-piece #8 kit with five lengths, 115 screws and 115 matching rubber washers in 410 stainless steel, stored in a clear plastic box.

Pros

  • Five #8 lengths, 1/2, 5/8, 3/4, 1 and 1-1/4 inch, in one kit
  • 115 rubber washers included, one for each screw
  • Self-drilling point drills into metal without pre-drilling, as stated
  • Clear plastic storage box keeps sizes sorted

Cons

  • Only 10 screws in the longest 1-1/4 inch size
  • Truss head sits above the surface instead of flush
  • Cross groove head needs a matching driver bit, which is not in the box
  • Five lengths in one kit means the box carries sizes a single job may not use
Wensilon (300Pcs) #8×3/4" Hex Washer Head Self

Wensilon (300Pcs) #8×3/4" Hex Washer Head Self

Wensilon9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

300 hex washer head self-drilling screws in #8 x 3/4 inch, 410 stainless steel, with an extra socket bit adapter in each order.

Pros

  • 300 screws in one box, all #8 x 3/4 inch
  • Hex washer head takes a socket for high torque
  • Self-drilling TEK point, no pre-drilling stated
  • Extra socket bit adapter included with each order

Cons

  • One size only, so other lengths need another box
  • No washers included for sealing joints
  • No storage box in the pack
  • No warranty term is stated
Wensilon(300pcs)#8×3/4”for Sheet Metal

Wensilon(300pcs)#8×3/4”for Sheet Metal

Wensilon9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

300 truss head self-tapping screws in #8 x 3/4 inch, 410 stainless steel, with deep threads and an extra cross-drilled tail in each box.

Pros

  • 300 screws in one box, all #8 x 3/4 inch
  • Deep thread design for holding power in sheet metal
  • Truss head gives a wide bearing surface on thin sheet
  • 410 stainless steel, corrosion resistant and rustproof as stated

Cons

  • One size only, so other lengths need another box
  • No washers included for sealing joints
  • Truss head sits above the surface instead of flush
  • No warranty term is stated
SVLING #8 x 1/2" Self Tapping Gutter Screws

SVLING #8 x 1/2" Self Tapping Gutter Screws

SVLING9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

110 hex washer head self-tapping screws in #8 x 1/2 inch, 410 stainless steel, with a 1/4 inch socket bit included, made for gutter elbows and downspouts.

Pros

  • Made for gutter elbows and downspouts, as stated
  • Hex washer head works with sockets for high torque
  • Sharp self-tapping point cuts through metal sheets, aluminum and plastic
  • 1/4 inch socket bit included in the box

Cons

  • 1/2 inch length suits thin sheet and gutters, not thicker stock
  • 110 pieces, fewer than the bulk packs here
  • No washers included for sealing joints
  • Only one 1/4 inch socket bit is included
#10 x 3/4" (50 PCS) Metal Roofing Screws

#10 x 3/4" (50 PCS) Metal Roofing Screws

kvohlum9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

50 hex head self-drilling screws in #10 x 3/4 inch, carbon steel with a zinc-plated surface, each with an EPDM rubber washer and a hex bit socket included.

Pros

  • EPDM washer forms a tight seal as the screw tightens, as stated
  • #10 thread diameter, larger than the #8 picks here
  • Hex bit socket included in the package
  • Self-drilling point screws into metal or wood without pre-drilling, as stated

Cons

  • Carbon steel with zinc plating, not stainless steel
  • 50 pieces, the smallest pack here
  • Made for thin metals, so thicker stock needs a longer screw
  • No storage box is stated in the listing

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Size Head Material Pack Washer
mxuteuk #8 5-Size Kit 9.7/10 #8, 1/2 to 1-1/4 in Truss head 410 stainless steel 230 pieces Rubber washers included
Wensilon #8 Hex Washer 300-Pack 9.7/10 #8 x 3/4 in Hex washer head 410 stainless steel 300 pieces Not stated
Wensilon #8 x 3/4 Truss Head 9.6/10 #8 x 3/4 in Truss head 410 stainless steel 300 pieces Not stated
SVLING #8 Gutter Screws 9.6/10 #8 x 1/2 in Hex washer head 410 stainless steel 110 pieces Not stated
kvohlum #10 Roofing Screws 9.5/10 #10 x 3/4 in Hex head Carbon steel, zinc-plated 50 pieces EPDM rubber washer

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 18 November 2026.

Buying guide: how to pick the best sheet metal screws

Size and length

Size is the gauge number and the length. The picks here are #8 and #10, with lengths from 1/2 inch to 1-1/4 inch. A #10 screw has a larger thread diameter than a #8, and a longer screw reaches through thicker layers. Match the length to the stack: the SVLING screws at 1/2 inch suit gutter elbows and downspouts, while the mxuteuk kit runs to 1-1/4 inch for thicker joints.

Head style

Head style decides the driver and how the screw sits. A truss head spreads the load on thin sheet and sits above the surface. A hex washer head drives with a socket and takes high torque, as the SVLING listing states. A hex head with a washer, like the kvohlum roofing screws, adds a seal under the head. Pick the head for the driver already on the bench and the finish the joint needs.

Self-drilling or self-tapping

Self-drilling screws carry a drill point and cut their own hole in metal without pre-drilling, as the mxuteuk, Wensilon hex washer and kvohlum listings state. Self-tapping screws have a sharp point that cuts a thread as it turns, and the SVLING and Wensilon truss listings state they go in without pre-drilling. Either way, check the point type before ordering, since it decides whether the job needs a pilot hole.

Material and corrosion

Four picks here are 410 stainless steel, which the listings state resists rust and corrosion, and the mxuteuk listing states it suits outdoor or humid environments. The kvohlum screws are carbon steel with a zinc-plated surface, which the maker states is corrosion-resistant and anti-rust. For gutters, roofing and trailer exteriors, match the material to the weather the joint will see.

Washers and sealing

A washer under the head seals the hole and spreads the load. The mxuteuk kit includes 115 rubber washers, one for each screw, and the kvohlum screws bond an EPDM washer to a metal washer on every screw. The other three packs list no washer, so joints that must stay dry need a washer added or a different pick.

Pack size and extras

Pack sizes here run from 50 to 300 pieces. A 300-piece pack suits a run of gutter or shop work in one size, while the 230-piece mxuteuk kit spreads across five lengths. Check what else is in the box: the Wensilon hex pack adds a socket bit adapter, the SVLING pack adds a 1/4 inch socket bit, and the kvohlum pack adds a hex bit socket.

Use as directed. Sheet metal edges and screw points are sharp. Wear eye protection when driving screws, clamp the work before drilling or driving, and keep gloves away from a spinning bit. Check the screw length against the stack before driving, and keep hands clear of the point. See the Safety Disclaimer.

Before You Strike an Arc

  • Count the screws on arrival and match the lengths to the sizes the listing states, since kits mix sizes in one box.
  • Check that the washers sit flat under the heads on the mxuteuk and kvohlum screws before driving.
  • Confirm the driver bit fits the head: the mxuteuk kit uses a cross groove, and the hex washer and hex head picks take a socket.
  • Drive a screw into scrap of the same sheet first to check the point bites and the head seats.

FAQ for welders

Can sheet metal screws go through steel?

Yes, where the listing states it. The mxuteuk, Wensilon hex washer and kvohlum screws are self-drilling and the makers state they drill into metal without pre-drilling. The SVLING and Wensilon truss screws are self-tapping with a sharp point that cuts through metal sheet. No listing here states a maximum steel thickness, so match the screw to thin sheet and check the point type before ordering.

What size sheet metal screws for downspouts?

The SVLING pick is made for the job: #8 x 1/2 inch hex washer head screws in 410 stainless steel, with a 1/4 inch socket bit in the box. The listing names gutter elbows and downspouts directly. A 1/2 inch length suits the thin sheet of a downspout seam.

What are sheet metal screws?

Sheet metal screws are screws made to fasten thin sheet metal, with a sharp or drill point and deep threads that cut their own path. The picks here are #8 and #10, in truss head, hex washer head and hex head styles, in 410 stainless steel or zinc-plated carbon steel. They fasten sheet to sheet, sheet to wood and sheet to thin metal framing.

What size sheet metal screws for gutters?

For gutters, the SVLING #8 x 1/2 inch screws are the named pick, made for gutter elbows and downspouts. The mxuteuk kit covers the same work with #8 screws from 1/2 to 1-1/4 inch and a rubber washer on each screw. Pick the length for the gutter seam and keep the washer where the joint must stay dry.

Do sheet metal screws need a pilot hole?

Not where the listing states otherwise. The self-drilling picks here drill into metal without pre-drilling, as the makers state, and the self-tapping picks cut their own thread as they turn. If the point will not bite, stop and check the metal and the point type rather than forcing the screw.

Related: best sheet metal screws, best sheet metal tools, best sheet metal brake for gutters, aluminum sheet metal gauge chart, steel sheet metal gauge chart, best sheet metal gauge thickness tool, best saw blade for cutting metal roofing, best cut resistant gloves for sheet metal, and best drill bit to drill through metal.

Scoring, line by line

Each screw is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Sheet metal screws carry no electrical safety listing, so every screw here scores zero on that criterion, and no listing here states a warranty term, so every screw scores zero there too; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
mxuteuk #8 5-Size Kit 9.7 32 22 22 n/a 0
Wensilon #8 Hex Washer 300-Pack 9.7 30 21 22 n/a 0
Wensilon #8 x 3/4 Truss Head 9.6 29 21 21 n/a 0
SVLING #8 Gutter Screws 9.6 28 20 20 n/a 0
kvohlum #10 Roofing Screws 9.5 27 19 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Metal Fab Tools ·

How to Remove Broken Screw from Metal

A broken screw stuck in metal comes out with the right extractor for the fastener, and this guide shows the steps and the 4…

Sheet Metal and Tubing ·

Best Tool Belt for Sheet Metal Workers (2026)

Five tool belts and rigs for sheet metal workers, compared on waist fit, pockets, suspenders, material and warranty, scored from what each listing states.