Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tongs for Blacksmithing (2026): 5 Picks for the Forge

Five steel blacksmithing tongs and tong sets, compared on jaw type, stock size, length and the warranty each listing states.

Best Tongs for Blacksmithing (2026): 5 Picks for the Forge
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Camoo Wolf Jaw 15 inBest OverallCamoo Wolf Jaw 15 in9.6/10View on Amazon
  2. 2V-SEK 5-Piece SetBest Five-Piece SetV-SEK 5-Piece Set9.6/10View on Amazon
  3. 3Bonbo V-Bit Bolt 17 inBest Single V-Bit TongBonbo V-Bit Bolt 17 in9.6/10View on Amazon
  4. 4Yoursme Rapid Tongs BundleBest Blank SetYoursme Rapid Tongs Bundle9.4/10View on Amazon

A hot bar comes out of the forge glowing, and the next seconds decide the shape it keeps. Your tongs are the hands that hold it through those seconds, steady on the anvil while the hammer falls. The best tongs for blacksmithing grip the stock you actually forge, fit your hand at the anvil, and keep your fingers clear of the heat. This guide compares tongs and tong sets on what each listing states: jaw type, stock size, length and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Camoo Wolf Jaw 15 in: A 15 in wolf jaw tong in steel, with a stated 12-month warranty and an extended head with multiple grip points. Check price on Amazon
  • Best Five-Piece Set V-SEK 5-Piece Set: Five jaw types in one set, with stated stock sizes for each tong and lengths from 15.35 to 16.93 inches. Check price on Amazon
  • Best Single V-Bit Tong Bonbo V-Bit Bolt 17 in: A 17 in V-bit bolt tong that holds square stock from 7/16 to 1 inch, with an abrasion resistant coating. Check price on Amazon
  • Best Blank Set Yoursme Rapid Tongs Bundle: Five tong blanks in 5/16 inch mild steel with rivets included, plus a stated 12 months’ warranty. Check price on Amazon

The machines

Blacksmith Tongs Wolf Jaw Blacksmithing Tool

Blacksmith Tongs Wolf Jaw Blacksmithing Tool

Camoo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 in wolf jaw tong in steel, made to hold round and square stock of various sizes, with a stated 12-month warranty.

Pros

  • Wolf jaw grips round and square stock from different angles
  • Extended head length with multiple grip points
  • Steel build stated as high temperature resistant
  • 12-month warranty stated in the listing

Cons

  • Single jaw type, so it covers fewer stock shapes than a set
  • 15 in is the smallest length stated here
  • No stock size range stated in inches
  • One jaw type only, so other jaw types need another tong
V-SEK Blacksmith Tongs - V-Bit, Flat, Blade

V-SEK Blacksmith Tongs - V-Bit, Flat, Blade

V-SEK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A five-piece set of assembled steel tongs, V-bit, flat, blade, square jaw and wolf jaw, with lengths from 15.35 to 16.93 inches.

Pros

  • Five jaw types cover flat, square, round stock and blades
  • Stated stock sizes for each tong, up to 1 1/2 inch flat stock
  • Forged steel round stock with a non-slip wax surface
  • Lengths from 15.35 to 16.93 inches keep hands back from the forge

Cons

  • No warranty term stated in the listing
  • Blade tongs handle stock from 1/8 to 3/8 inch only
  • Flat tongs are made for 1/4 inch flat stock only
  • Five tongs take more storage than a single tong
17 Inch V-Bit Bolt Blacksmith Tongs

17 Inch V-Bit Bolt Blacksmith Tongs

Bonbo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 17 in V-bit bolt tong in steel with an abrasion resistant coating, made to hold square stock from 7/16 to 1 inch.

Pros

  • Deep V groove stated to hold stock deadlocked under hammering
  • Holds square stock from 7/16 to 1 inch, including railroad spikes
  • 17 in length keeps distance from hot material
  • Abrasion resistant coating on forged steel

Cons

  • No warranty term stated in the listing
  • Single jaw type, so other stock shapes need another tong
  • V-bit jaw is shaped for bolt and square stock, so blade work may need a different tong
  • 17 in length is the longest here, so it needs more bench space
Yoursme DIY Rapid Tongs Bundle Set

Yoursme DIY Rapid Tongs Bundle Set

Yoursme9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bundle of five tong blanks in 5/16 inch mild steel, flat jaw, bolt, scroll, slot jaw and V-bit, each with a rivet included.

Pros

  • Five blank types cover flat jaw, bolt, scroll, slot jaw and V-bit shapes
  • Machined from 5/16 inch thick mild steel
  • Each pair comes with a rivet
  • 12 months' warranty stated in the listing

Cons

  • Blanks, not finished tongs: drill or punch, heat and shape them
  • No finished jaw sizes stated, since you shape the jaws yourself
  • No length stated in the listing
  • Shaping blanks takes forge time before first use
Blacksmith Tongs Set 3-Piece, V-Bit

Blacksmith Tongs Set 3-Piece, V-Bit

SPARKWHIZ9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A three-piece set of V-bit, blade and flat tongs in heavy-duty forged steel with a black oxide finish, made for knife making and forging.

Pros

  • Three jaw types in one kit: V-bit, blade and flat
  • Heavy-duty forged steel with a black oxide finish
  • Long handles keep hands far from hot metal
  • Smooth hinge for easy opening and closing

Cons

  • No warranty term stated in the listing
  • No length stated in the listing
  • No stock sizes stated in inches
  • No weight stated in the listing

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Length Jaw type Stock it holds Warranty
Camoo Wolf Jaw 15 in 9.6/10 15 in Wolf jaw Round and square stock, various sizes 12 months
V-SEK 5-Piece Set 9.6/10 15.35 to 16.93 in V-Bit, Flat, Blade, Square Jaw, Wolf Jaw Flat stock to 1 1/2 in and 1/4 in thick or less; blade stock 1/8 to 3/8 in; square stock 1/2 in Not stated
Bonbo V-Bit Bolt 17 in 9.6/10 17 in V-Bit bolt, wolf jaw Square stock 7/16 to 1 in Not stated
Yoursme Rapid Tongs Bundle 9.4/10 Not stated Flat Jaw, Bolt, Scroll, Slot Jaw, V-Bit Smaller stock sizes 12 months
SPARKWHIZ 3-Piece Set 9.4/10 Not stated V-Bit, Blade, Flat Knife blanks, round bars, flat stock Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 November 2026.

Buying guide: choosing the best tongs for blacksmithing

Jaw type and stock fit

Jaw shape decides what the tongs hold. A wolf jaw grips round and square stock from different angles, and the Camoo wolf jaw suits stock of various sizes. A V-bit jaw has a deep V groove that holds flat stock steady under the hammer: the V-SEK V-bit tong handles flat stock up to 1 1/2 inch and 1/4 inch thick or less, and the Bonbo V-bit bolt tong holds square stock from 7/16 to 1 inch. Flat tongs suit thin flat stock, blade tongs hold knife blades, and square jaw tongs hold square stock.

Length and hand distance

Length sets how far your hands sit from hot steel. The Camoo tong is 15 in long, the V-SEK tongs run from approximately 15.35 to 16.93 inches, and the Bonbo tong is 17 in long. The V-SEK listing states its lengths keep hands a safe distance from the forge when removing steel, and the Bonbo listing states its 17 inch length keeps distance from hot material while giving control. Longer tongs give more distance but need more room.

Sets, single tongs and blanks

A set covers more stock shapes in one purchase. The V-SEK set has five jaw types and the SPARKWHIZ set has three, while the Camoo and Bonbo are single tongs with one jaw type each. The Yoursme bundle is different again: five blanks you drill or punch, heat and shape yourself, each with a rivet included. Blanks suit a smith who wants tongs shaped to fit; finished tongs suit anyone who wants to grip stock at once.

Warranty

Two listings here state a warranty term. The Camoo tong carries a 12-month warranty and the Yoursme bundle carries 12 months’ warranty, while the V-SEK, Bonbo and SPARKWHIZ listings state no warranty term. The Camoo and Bonbo listings also state a 30-day return, and the Yoursme listing states a 30-day full refund. A stated warranty term matters more than a return window for tongs in daily forge work.

Use as directed. Work the forge outdoors or with strong ventilation, keep a fire extinguisher within reach, and never leave a lit forge unattended. Check the jaw fit on cold stock before heating, and check that the rivet and hinge move freely. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Check the jaw fit on cold stock in the size you forge most, and confirm the stated stock range covers it.
  • Open and close the tongs before heating and check the rivet and hinge move freely.
  • For the Yoursme blanks, drill or punch, heat and shape the jaws before first use.
  • Forge outdoors or with strong ventilation, keep a fire extinguisher within reach, and never leave a lit forge unattended.
  • Let hot tongs cool before setting them down.

FAQ for welders

What size tongs do I need for blacksmithing?

Match the jaw to your stock first, then the length to your reach. The Camoo wolf jaw tong is 15 in long, the Bonbo V-bit tong is 17 in long, and the V-SEK tongs run from approximately 15.35 to 16.93 inches. Longer tongs keep your hands farther from hot steel.

What is the difference between wolf jaw and V-bit tongs?

A wolf jaw grips round and square stock of various sizes from different angles, which suits general forging. A V-bit jaw has a deep V groove that holds flat stock steady under the hammer, and the V-SEK V-bit tong handles flat stock up to 1 1/2 inch and 1/4 inch thick or less. Choose the wolf jaw for mixed stock and the V-bit jaw for flat stock.

Are tong blanks a good choice for a beginner?

Blanks suit a beginner who wants to learn shaping at the forge. The Yoursme bundle gives five blank types in 5/16 inch mild steel, each with a rivet, and you drill or punch, heat and shape them to fit. If you want tongs ready to grip stock, pick a finished tong instead.

How long should blacksmithing tongs be?

The tongs here run from 15 in to 17 in where the listing states a length. The V-SEK listing states its lengths keep hands a safe distance from the forge, and the Bonbo listing states its 17 inch length keeps distance from hot material. Pick the length that keeps your hands clear at the anvil.

Do blacksmithing tongs come with a warranty?

Some do. The Camoo tong carries a 12-month warranty and the Yoursme bundle carries 12 months’ warranty, while the V-SEK, Bonbo and SPARKWHIZ listings state no warranty term. The Camoo and Bonbo listings state a 30-day return, and the Yoursme listing states a 30-day full refund.

Related: best anvil for blacksmithing, best blacksmith hammers, best propane forge for blacksmithing, coal forge for beginners, and the metal fab tools hub. Also see our types of blacksmith hammers. Also see our propane forge temperature. Also see our electric vs propane forge.

Scoring, line by line

Each tong is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Blacksmithing tongs are hand tools with no electrical safety listing to state, so every tong here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Camoo Wolf Jaw 15 in 9.6 28 20 20 n/a 2
V-SEK 5-Piece Set 9.6 30 21 21 n/a 0
Bonbo V-Bit Bolt 17 in 9.6 28 20 20 n/a 0
Yoursme Rapid Tongs Bundle 9.4 23 19 18 n/a 2
SPARKWHIZ 3-Piece Set 9.4 27 20 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides