Types of Blacksmith Hammers: Cross Peen, Flat Peen and Sledge
Cross peen, flat peen, hand sledge and hammer sets do different work at the forge, and head weight and handle shape decide which hammer suits each job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ESTWING Sure Strike Blacksmith's Hammer9.6/10View on Amazon - 2
Spec Ops Tools Blacksmith Hammer for Striking9.6/10View on Amazon - 3
DESHIL 3 lb Flat Peen Blacksmith Hammer9.5/10View on Amazon - 4
Titan 63125 5-Piece Hammer Set9.5/10View on Amazon
A hot bar on the anvil needs a hammer that matches the job: spreading, bending, driving or shaping. Types of blacksmith hammers differ by the shape of the peen, the weight of the head and the handle under it, and the wrong shape wastes effort and marks the work. This guide explains the main shapes, what each one does at the forge, and how head weight and handle design change the swing.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ESTWING Sure Strike Blacksmith's Hammer
A 64 oz hand sledge with a forged steel head and a non-slip fiberglass handle, from a maker of striking tools for nearly 100 years.
Pros
- Forged steel head, built for hard striking work
- Non-slip cushion grip on a fiberglass handle
- Maker of striking tools for nearly 100 years
- Warranty against failure in normal use stated
Cons
- Listing gives 3 different weight figures
- No concrete warranty term stated
- Compact handle suits close work and limits reach on long swings

Spec Ops Tools Blacksmith Hammer for Striking
A 2.5 lb cross peen hammer with a shock-absorbing handle, a removable mallet cap and overstrike armor.
Pros
- Tapered cross peen suits blacksmithing and metal shaping
- Removable santoprene mallet cap replaces a rubber mallet
- Composite overstrike armor protects the handle
- Bi-material handle dampens shock and vibration
Cons
- No warranty term stated
- Handle length not stated apart from the 10.5 inch overall size
- 2.5 lb weight suits shaping more than heavy driving
- No stated steel grade for the head

DESHIL 3 lb Flat Peen Blacksmith Hammer
A 3 lb flat peen hammer with a fiberglass handle and a textured rubber grip, built for forging, masonry and repair work.
Pros
- 3 lb head gives steady impact for shaping metal
- Flat peen wedge end supports bending and spreading
- Textured rubber handle area helps reduce slipping
- Handle end hole supports hanging storage
Cons
- No warranty term stated
- No stated steel grade for the head
- Flat peen suits bending more than the spreading a cross peen gives
- No overstrike guard stated

Titan 63125 5-Piece Hammer Set
A 5-piece hammer set with ball pein, sledge, rubber mallet and cross pein hammers on shock-absorbing fiberglass handles.
Pros
- 5 hammers in a set cover ball pein, sledge, mallet and cross pein work
- Includes a 3 lb cross pein hammer for forging
- Shock-absorbing fiberglass handles with textured grips
- Includes a 32 oz rubber mallet for non-marring strikes
Cons
- Warranty reads only MANUFACTURER WARRANTY, with no term stated
- Ball pein hammers and the rubber mallet are not blacksmith hammers
- Set weighs 13.85 pounds, so it is a bench set rather than a carry hammer
- No stated steel grade for the heads
Types of Blacksmith Hammers at the Forge
The cross peen is the classic blacksmith hammer. Its tapered peen runs across the handle and spreads metal sideways, which suits drawing out a bar, shaping a taper and working a fuller. The Spec Ops hammer (on Amazon) in this guide carries a tapered cross peen for blacksmithing, metal shaping and demolition.
The flat peen is a wedge end that bends, spreads and adjusts metal. The DESHIL hammer (on Amazon) in this guide uses a flat peen for bending and spreading during forging or workshop use. It suits straightening and adjusting more than the focused spreading of a cross peen.
The hand sledge is a heavy striking hammer with a flat face on each end. The Estwing hammer in this guide is a 64 oz hand sledge with a forged steel head, built for driving and heavy shaping where a cross peen would be too light. Ball pein hammers round and shape metal with a ball end, and they appear in the Titan set in this guide alongside a cross pein hammer and a sledge.
How Head Weight Changes the Work
Head weight sets how much force each blow carries and how long the arm lasts. A 2.5 lb hammer suits shaping and controlled work: the Spec Ops hammer states 2.5 lbs, and the Estwing bullets describe a 2 lb head on a 2.5 lb sledge. A 3 lb head hits harder and suits heavier forging: the DESHIL hammer states a 3 lb head, and the Titan set includes a 3 lb cross pein hammer and a 3 lb sledgehammer.
Lighter heads in the Titan set, a 16 oz ball pein and a 32 oz ball pein, suit small metalwork and detail shaping. The 32 oz rubber mallet in the same set suits strikes that must not mar the surface. Match the head to the stock: a heavy head on thin stock dents and distorts it, while a light head on heavy stock takes more blows than the job needs.
Handles and Grip
The Estwing, DESHIL and Titan hammers (on Amazon) all state fiberglass handles, and the Spec Ops hammer uses a bi-material handle that absorbs shock and dampens vibration. The DESHIL listing says its fiberglass handle balances durability and manageable weight for shop or jobsite work. The Spec Ops hammer adds composite overstrike armor where the handle meets the head.
Grip texture matters when the hands sweat. The Estwing handle has a non-slip cushion grip, the DESHIL handle has a textured rubber area, and the Titan handles have textured grips. The Spec Ops mallet cap adds a soft striking face that suppresses strike noise, which helps in a shared shop.
The Gear: Hammers for the Forge
The shapes above need a hammer in hand, so here are the 4 hammers from the listings: a cross peen, a flat peen, a hand sledge and a 5-piece set, ranked by Gear Score.
Side by Side
| Gear Score | Head | Handle | |
|---|---|---|---|
| Estwing MRF64BS | 9.6/10 | 64 oz forged steel head | Fiberglass, non-slip cushion grip |
| Spec Ops SPEC-M-BLK25-S | 9.6/10 | 2.5 lb cross peen head | Bi-material, shock-absorbing |
| DESHIL T38-3LB | 9.5/10 | 3 lb flat peen head | Fiberglass, textured rubber grip |
| Titan 63125 | 9.5/10 | 5-piece set, 16 oz to 3 lb heads | Fiberglass, textured grips |
Head weight and handle material are the simplest way to sort these hammers: the cross peen and flat peen shape metal, the hand sledge drives it, and the set covers more shapes at once.
FAQ for welders
What hammer does a blacksmith use most?
The cross peen hammer is the usual pick at the forge, since its tapered peen spreads metal and draws out a bar. The Spec Ops hammer in this guide is a cross peen hammer built for blacksmithing and metal shaping, and the Titan set includes a 3 lb cross pein hammer for the same work. A flat peen hammer suits bending and adjusting, while a hand sledge suits heavy driving.
What weight hammer should a beginner blacksmith start with?
A 2.5 lb hammer is a sound starting point, since it suits shaping and controlled work without tiring the arm as fast as a heavier head. The Spec Ops hammer states 2.5 lbs, and the Estwing bullets describe a 2.5 lb sledge. A 3 lb hammer, like the DESHIL flat peen, suits heavier forging once the swing is steady.
What is a cross peen hammer used for?
A cross peen hammer spreads metal sideways and draws out a bar, which suits shaping a taper and working a fuller. The Spec Ops hammer states its tapered cross peen is for blacksmithing, metal shaping and enhanced demolition. It also suits general metalwork where a flat face would spread the blow too wide.
What is the difference between a flat peen and a cross peen hammer?
A flat peen is a wedge end that bends, spreads and adjusts metal, while a cross peen is a tapered peen that runs across the handle and spreads metal sideways. The DESHIL hammer in this guide is a flat peen hammer, and the Spec Ops hammer is a cross peen hammer. Pick the flat peen for bending and adjusting, and the cross peen for drawing out and shaping.
Can a hand sledge replace a blacksmith hammer?
A hand sledge can drive and shape heavy stock, but it lacks the peen that spreads and shapes metal. The Estwing hammer in this guide is a 64 oz hand sledge with a forged steel head, built for driving and heavy shaping. Keep a cross peen or flat peen hammer beside it for the shaping work a sledge face cannot do.
Related: best blacksmith hammers, best cross peen blacksmith hammer, ball peen hammer uses, and ball peen vs cross peen hammer.




