Best Tongs for Blacksmithing Under $50 (2026)
Best tongs for blacksmithing under 50, compared on length, jaw shape, stock sizes and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCongGongGo 3-Piece Tongs Set9.7/10View on Amazon - 2
Best Single TongCamoo Wolf Jaw Tongs 17 in9.6/10View on Amazon - 3
Best Knife-Making SetV-SEK 3-Piece Tongs Set9.6/10View on Amazon - 4
Best Forged Wolf JawBzsunway Wolf Jaw Tongs 15 in9.5/10View on Amazon
A hot bar on the anvil needs a grip that holds through the hammer blows, and the wrong tongs let the work twist or slip at the worst moment. This guide covers the best tongs for blacksmithing under 50, compared on length, jaw shape, the stock each pair holds, and the warranty in writing, so a beginner or a bladesmith can pick the tongs that fit the work on the bench.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall CongGongGo 3-Piece Tongs Set: Three jaw types in one set, heat-treated steel, and blade tongs sized for 1/8 to 3/8 inch stock. Check price on Amazon
- Best Single Tong Camoo Wolf Jaw Tongs 17 in: A 17 inch wolf jaw tong with multiple grip points and a 12-month warranty. Check price on Amazon
- Best Knife-Making Set V-SEK 3-Piece Tongs Set: V-bit, blade and flat tongs, with blade tongs for 1/8 to 3/8 inch knife stock. Check price on Amazon
- Best Forged Wolf Jaw Bzsunway Wolf Jaw Tongs 15 in: Forged steel wolf jaw for knife forging, with a 1-year replacement for quality issues. Check price on Amazon
The machines

Blacksmith Tongs Set 3 Pcs Flat, Wolf Jaw Bolt
A 3-piece set of heat-treated forged steel tongs with wolf jaw, flat jaw and square jaw tongs, plus blade tongs sized for knife stock from 1/8 to 3/8 inch thick.
Pros
- Wolf jaw, flat jaw and square jaw tongs cover flat, square and round stock in one set
- Blade tongs hold flat stock from 1/8 to 3/8 inch thick and up to 1-3/4 inches wide
- Deep V-groove round stock tongs deadlock onto 1/2 inch round stock
- Heat-treated forged steel with a linseed oil finish against rust
Cons
- No warranty term is stated in the listing
- Three tongs to store, oil and keep track of instead of one
- Flat and square jaws are sized for 3/16 inch flat and 1/2 inch square stock, so larger stock needs a different tong
- Round stock grip is stated at 1/2 inch, so heavier round bar is outside the stated range

Camoo Blacksmith Tongs Wolf Jaw 17 in, Black
A 17 inch wolf jaw tong in steel with an extended head and multiple grip points, made to hold round and square stock, with a 12-month warranty.
Pros
- 17 inch length keeps hands clear of the forge
- Wolf jaw grips round and square stock from different angles
- Extended head with multiple grip points for varied forging work
- 12-month warranty stated in the listing
Cons
- Wolf jaw only, so flat stock and knife blades need a different tong
- A single tong in the box, with no flat or blade tong included
- Returns are limited to 30 days
- At 17 inches it is long for small work away from the forge

V-SEK Blacksmith Tongs Set - V-Bit, Blade, Flat
A 3-piece set of forged steel tongs, V-bit, blade and flat, about 14.84 to 16.53 inches long, made for knife making and flat stock work.
Pros
- Three jaw shapes in one set: V-bit, blade and flat
- V-bit tongs hold flat stock up to 1-1/2 inches wide and 1/4 inch thick
- Blade tongs hold stock from 1/8 to 3/8 inch thick for knife work
- Forged steel round stock with a non-slip wax surface against rust
Cons
- No warranty term is stated in the listing
- Flat tongs are made for 1/4 inch flat stock, so thicker flat stock needs another tong
- Lengths run about 14.84 to 16.53 inches, so the set is shorter than the 17 inch single tongs
- Three tongs to store and keep oiled instead of one

Bzsunway Knife Forging Tool Blacksmithing Tongs
A forged steel wolf jaw tong for knife forging, listed at 15 inches with a V bolt down the jaw, and a 1-year replacement for quality issues.
Pros
- Wolf jaw grips stock end on or across the jaw, in a variety of widths
- Forged heavy-duty steel, wear resistant and made for high temperatures
- Suits beginners and experienced smiths forging knives and general work
- 1-year replacement for quality-related issues stated in the listing
Cons
- Wolf jaw only, with no flat or blade tong in the box
- At 15 inches it gives less hand distance from the forge than the 17 inch Camoo
- Returns are limited to 30 days
- No spare or second tong in the box for a helper at the anvil
Spec sheet comparison
| Model | Gear Score | Length | Jaw types | Stock it holds | Warranty |
|---|---|---|---|---|---|
| CongGongGo 3-Piece Tongs Set | 9.7/10 | 16 in | Wolf, flat, square, blade | 1/8 to 3/8 in flat, 1/2 in round | Not stated |
| Camoo Wolf Jaw Tongs 17 in | 9.6/10 | 17 in | Wolf jaw | Round and square stock | 12-month |
| V-SEK 3-Piece Tongs Set | 9.6/10 | About 14.84 to 16.53 in | V-bit, blade, flat | Up to 1-1/2 in flat, 1/8 to 3/8 in blade | Not stated |
| Bzsunway Wolf Jaw Tongs 15 in | 9.5/10 | 15 in | Wolf jaw | Various sizes and shapes | 1-year replacement |
All specs here repeat what the maker rates and the listing prints, copied down 20 November 2026. Where a listing states a figure two ways, the table shows both.
Best tongs for blacksmithing under 50: buying guide
Jaw shape decides what the tongs hold
Wolf jaw tongs grip round and square stock, and the Camoo and Bzsunway picks are wolf jaw tongs. V-bit tongs lock flat stock when the hammer lands, and the V-SEK set pairs V-bit tongs with blade and flat tongs. The CongGongGo set adds a square jaw tong, so one box covers flat, square and round stock plus knife blades.
Length keeps hands clear of the forge
The Camoo measures 17 inches, while the V-SEK set runs about 14.84 to 16.53 inches and the CongGongGo set measures 16 inches. The Bzsunway title states 15 inches while its description says about 17 inches, so confirm that length before ordering. Longer tongs give more distance from the heat, while shorter tongs give more control at the anvil.
Stock sizes in writing
The V-SEK V-bit tongs hold flat stock up to 1-1/2 inches wide and 1/4 inch thick, and its blade tongs hold stock from 1/8 to 3/8 inch thick. The CongGongGo blade tongs hold flat stock from 1/8 to 3/8 inch thick and up to 1-3/4 inches wide, its flat and square jaw tongs grip 3/16 inch flat and 1/2 inch square stock, and its round stock tongs deadlock onto 1/2 inch round stock. The Camoo and Bzsunway listings state no stock sizes, so the grip range for those two is not in writing.
Steel, finish and rust
Every pick here is steel. The V-SEK set is forged from steel round stock with a non-slip wax surface, and the CongGongGo set is heat-treated forged steel with a linseed oil finish. Both finishes resist rust and corrosion in a humid forge. The Camoo lists high-quality steel that resists high temperature, and the Bzsunway is forged heavy-duty steel made for high temperatures.
Warranty in writing
Cover is stated for the Camoo and the Bzsunway, and not for the sets. The Camoo carries a 12-month warranty with a 30-day return, and the Bzsunway offers a 1-year replacement for quality issues with a 30-day return. The V-SEK and CongGongGo listings state no warranty term.
Before You Strike an Arc
- Check the jaws meet evenly and grip your stock before the first heat.
- Match the jaw shape to the stock on the bench: wolf jaw for round and square, V-bit for flat, blade tongs for knife stock.
- Check the wax or linseed oil finish on arrival, and oil the tongs before storing them.
- Confirm the length keeps your hands clear of the forge mouth on your setup.
- Keep the warranty wording with the receipt: Camoo states a 12-month warranty and Bzsunway states a 1-year replacement for quality issues, while the V-SEK and CongGongGo listings state no warranty term.
FAQ for welders
What length tongs should a beginner buy?
The Camoo measures 17 inches, the V-SEK set runs about 14.84 to 16.53 inches, and the CongGongGo set measures 16 inches. The Bzsunway title states 15 inches while its description says about 17 inches, so confirm that length before ordering.
What is the difference between wolf jaw and V-bit tongs?
Wolf jaw tongs grip round and square stock, and the Camoo and Bzsunway picks are wolf jaw tongs. V-bit tongs have a deep V groove that locks flat stock in place under the hammer, and the V-SEK set includes V-bit tongs for flat stock up to 1-1/2 inches wide and 1/4 inch thick.
Can one set of tongs hold flat, square and round stock?
Yes, the CongGongGo set covers all three: wolf jaw tongs for flat, square and round stock, flat and square jaw tongs for 3/16 inch flat and 1/2 inch square stock, and round stock tongs that deadlock onto 1/2 inch round stock. The V-SEK set covers flat stock and knife blades with its V-bit, blade and flat tongs, but it has no round stock tong.
Do any of these tongs come with a warranty?
Yes. The Camoo states a 12-month warranty, and the Bzsunway states a 1-year replacement for quality issues. Both also allow a return within 30 days. The V-SEK and CongGongGo listings state no warranty term.
Are these tongs good for knife making?
Yes, for the blade work they state. The V-SEK blade tongs hold stock from 1/8 to 3/8 inch thick, and the CongGongGo blade tongs hold flat stock from 1/8 to 3/8 inch thick and up to 1-3/4 inches wide. The Bzsunway is sold as a knife forging tool with a wolf jaw.
Related: best tongs for blacksmithing, best anvil for blacksmithing, best blacksmith hammers, coal forge for beginners, best propane forge for blacksmithing and best high carbon steel for knife making.
Scoring, line by line
Each tong is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CongGongGo 3-Piece Tongs Set | 9.7 | 32 | 22 | 22 | n/a | 0 |
| Camoo Wolf Jaw Tongs 17 in | 9.6 | 28 | 20 | 19 | n/a | 2 |
| V-SEK 3-Piece Tongs Set | 9.6 | 30 | 20 | 21 | n/a | 0 |
| Bzsunway Wolf Jaw Tongs 15 in | 9.5 | 26 | 19 | 18 | n/a | 2 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




