Electric vs Propane Forge: Which One Should You Buy?
Two Molten Masters propane forges rated at 2600°F go head to head on burners, insulation and size, while no electric forge listing is covered here.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
MMasters 3 Burner Propane Forge Kit9.6/10View on Amazon - 2
MMasters Mini 1 Burner Propane Forge Kit | 2600°F9.5/10View on Amazon
Verdict. In this electric vs propane forge comparison, pick the MMasters 3 Burner Propane Forge Kit if you want the propane forge with 3 burners and a stated size and weight. Pick the MMasters Mini 1 Burner Propane Forge Kit if you want the portable propane forge with a single door. No electric forge listing is covered here, so the electric side has no scored example in this comparison.
A forge is the heart of a small smithing setup, and the heat source shapes how you work. This electric vs propane forge comparison looks at what the two listings here actually state, and both of them are propane forges from Molten Masters. That leaves the electric side without a listing to score.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two forges

MMasters 3 Burner Propane Forge Kit
A 3 Burner propane forge rated at 2600°F with 1-inch insulation, a fire brick and heat-resistant gloves, in a 16.9 inches x 5.1 inches x 6.3 inches body.
Pros
- Rated at 2600°F with 3 burners for knife making and blacksmithing
- 1-inch insulation plus a fire brick for dual protection
- Heat-resistant gloves included in the box
- Gas hose and burner connect for a quick setup
Cons
- 27.45 pounds to lift and move around the shop
- No warranty term is stated
- No safety standard such as CSA, UL or ETL is stated
- Needs a rigidizer or protective coating on the ceramic fiber blanket before use

MMasters Mini 1 Burner Propane Forge Kit | 2600°F
A portable Mini 1 burner propane forge rated at 2600°F with 1-inch insulation and a fire brick, aimed at beginners and hobbyists.
Pros
- Rated at 2600°F with a portable design for beginners and hobbyists
- Single-door design that opens or closes as needed
- 1-inch insulation plus a fire brick for dual protection
- Gas hose and burner connect for a quick setup
Cons
- No weight is stated, so there is no stated figure to judge it by
- No dimensions are stated
- No warranty term is stated
- Needs a rigidizer or protective coating on the ceramic fiber blanket before use
Other welders and gear to compare
Generac 12Check price on Amazon
LSMIITTH Propane Forge Burner with RegulatorCheck price on Amazon
Lincoln Electric KH813 Flame-Resistant Welding SleevesCheck price on Amazon
Lincoln Electric Premium Flame ResistantCheck price on Amazon
Electric vs propane forge: what the listings show
| Gear Score | Burners | Max heat | Insulation | Weight | Size | |
|---|---|---|---|---|---|---|
| MMasters 3 Burner Propane Forge Kit | 9.6/10 | 3 | 2600°F | 1-inch | 27.45 pounds | 3 Burner |
| MMasters Mini 1 Burner Propane Forge Kit | 9.5/10 | 1 | 2600°F | 1-inch | Not stated | 1 burner |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 13 November 2026. Neither listing states a CSA, UL or ETL listing or a warranty term.
Heat and burners
Both forges state the same top heat: 2600°F. The 3 Burner forge has 3 burners, and the Mini has 1 burner. The listings give no heat figure for an electric forge, so this comparison cannot say which side runs hotter on stated specs; the propane side is the only side with a stated figure here. See the gas forge vs coal forge guide for another heat source comparison.
Insulation and safety notes
Both forges list 1-inch insulation and a fire brick. The 3 Burner listing also lists heat-resistant gloves in the box. Both listings carry the same safety note: apply a rigidizer or protective coating to the ceramic fiber blanket insulation, and disconnect the hose after use so residual heat does not reach the hose. Run a propane forge outdoors or with strong ventilation, keep a CO alarm and a fire extinguisher close, and never leave it lit and unattended.
Size and weight
The 3 Burner forge is the only one with stated size and weight: 16.9 inches x 5.1 inches x 6.3 inches and 27.45 pounds. The Mini listing states neither size nor weight, and calls its design portable. That leaves the size gap between the two forges unclear on stated figures.
What is in the box
Both listings describe the same quick start: connect the gas hose and burner. The 3 Burner listing names heat-resistant gloves in the box, and both name a fire brick. If parts arrive damaged, both listings point to help through Amazon Buyer-Seller Messages. Neither listing names a gas cylinder or regulator in the box.
Warranty
Neither listing states a warranty term. That is the main reason both forges score low on warranty, and it leaves the buyer with no written term to lean on. If a stated warranty matters to you, ask the maker before ordering.
Choose the MMasters 3 Burner Propane Forge Kit if
- You want the propane forge with 3 burners and a stated 2600°F figure.
- You want stated size and weight before you order.
- You want heat-resistant gloves in the box.
- You smith knives and general metalwork at home.
Choose the MMasters Mini 1 Burner Propane Forge Kit if
- You want the portable propane forge with a single door.
- You are a beginner or hobbyist starting with knife making and bladesmithing.
- You want the same stated 2600°F figure with 1 burner.
- You can live without stated size, weight or warranty term.
FAQ for welders
How hot do these propane forges get?
Both listings state 2600°F. The 3 Burner forge and the Mini 1 Burner forge share that figure, so heat does not separate them on stated specs. No heat figure is stated for an electric forge here.
What is the difference between the 3 Burner and the Mini 1 Burner forge?
The 3 Burner forge has 3 burners and states its size and weight, while the Mini has 1 burner, a single-door design and a portable build. Both state 2600°F, 1-inch insulation and a fire brick. The Mini listing leaves size and weight unstated.
Do these forges include insulation?
Yes. Both listings state 1-inch insulation and a fire brick. Both also carry a safety note asking for a rigidizer or protective coating on the ceramic fiber blanket insulation before use.
Is there an electric forge in this comparison?
No. Both listings in this comparison are propane forges from Molten Masters, so the electric side has no listing to score. Pick the propane side if you want a forge with stated specs here, and treat electric claims as unclear until a listing states them.
What should I check before lighting a propane forge?
Coat the ceramic fiber blanket with a rigidizer or protective coating, as the safety note asks, and check the gas hose and burner connection. Work outdoors or with strong ventilation, keep a CO alarm and a fire extinguisher close, and disconnect the hose after use.
Related: best propane forge for blacksmithing, gas forge vs coal forge, propane vs charcoal forge, and the forges and anvils hub. Also see the best anvil for blacksmithing.
Scoring, line by line
Both forges are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MMasters 3 Burner Propane Forge Kit | 9.6 | 29 | 21 | 20 | n/a | 0 |
| MMasters Mini 1 Burner Propane Forge Kit | 9.5 | 26 | 20 | 19 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.
Before You Strike an Arc. Set the forge outdoors or with strong ventilation, keep a CO alarm and a fire extinguisher close, and never leave it lit and unattended. Coat the ceramic fiber blanket with a rigidizer or protective coating before first use, as the safety note asks. Check the gas hose and burner connection before lighting, keep heat-resistant gloves and eye protection on, and disconnect the hose after use so residual heat does not reach it.




