Oxy Acetylene Torch Setup: Hoses, Regulators and Tips
Oxy acetylene torch setup: how to match regulators, hoses and tips to the cylinders, and which of 4 torch kits fits brazing or cutting work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Victor 0384-2101 Journeyman Edge 2.0 540/5109.8/10View on Amazon - 2
VEVOR Oxygen Acetylene Torch Kit with Check Valves9.6/10View on Amazon - 3
ESAB Victor 0384-0945 G150 J-P Light Duty Gas9.5/10View on Amazon - 4
RX WELD Light Duty Oxy-Fuel Welding and Cutting9.5/10View on Amazon
Oxy acetylene torch setup starts at the cylinders: the regulators, hoses and torch have to match each other before the gas flows. A torch that cuts clean is not luck; it is a setup where each fitting is the right size and each valve is checked before lighting. This guide walks through the setup in order, then lines up the torch kits that cover light brazing through heavy cutting.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Victor 0384-2101 Journeyman Edge 2.0 540/510
A heavy outfit that cuts up to 8 inches and welds up to 3 inches, with flash arrestors and a lifetime regulator warranty.
Pros
- Cuts up to 8 in (203.2 mm) and welds up to 3 in (76.2 mm) with accessories
- Built-in flash arrestors and check valves on the torch handle
- Ess42 series regulators with a lifetime warranty on the regulators
- Measures 25.09 x 14.53 x 5.31 inches and weighs 21.0 pounds
Cons
- No hose length is stated
- No tip sizes are stated in the listing
- Weighs 21.0 pounds, so it needs a solid spot on the bench
- A heavy outfit for 8 inch cutting, so it is more kit than a light brazing job needs

VEVOR Oxygen Acetylene Torch Kit with Check Valves
A torch kit with 2 tips, 2 regulators, a 15 ft hose rated to 300 PSI and a cylinder holder for the workshop.
Pros
- Includes 2 welding tips, number 0 and number 2, for different thicknesses
- 15 ft hose rated to 300 PSI with a 3/16 inch inside diameter
- CGA540 oxygen and CGA200 acetylene regulators with a cylinder holder
- Brass welding tips resist corrosion and high temperatures
Cons
- No warranty term is stated
- The acetylene regulator only fits MC-type acetylene cylinders
- No cut or weld capacity is stated in the listing

ESAB Victor 0384-0945 G150 J-P Light Duty Gas
A portable tote kit with regulators, torch handle, striker, goggles and a 12.5 ft hose, sold without tanks.
Pros
- Cuts up to 1/2 in and welds up to 1 1/4 in with optional nozzles
- 7 year warranty on the regulator and 10 year warranty on the torch handle and cutting attachment
- Molded tote with storage compartments, striker, goggles and tank key
- R150-200 and R150-540 regulators with a 103-01FP torch handle
Cons
- No check valves or flash arrestors are stated in the listing
- Tanks are not included
- No hose pressure figure is stated
- The 12.5 ft hose is shorter than the 15 ft hoses on the other kits here

RX WELD Light Duty Oxy-Fuel Welding and Cutting
A light duty kit for HVAC brazing with A-size regulators, check valves and a 15 ft hose, sold without cylinders.
Pros
- Welds up to 5/64 in (2.0 mm) and reaches 1 in (25.7 mm) with optional nozzles
- A-size regulators: CGA540 oxygen and CGA200 acetylene for small cylinders
- Check valves block reverse gas flow and cut the risk of flashback
- 15 ft R-rated rubber hose with 3/8-24 A fittings
Cons
- No warranty term is stated
- Cylinders are not included
- Light duty only: it is built for brazing and small work, not heavy cutting
- No tip sizes are stated in the listing
Oxy acetylene torch setup: the parts in order
A torch setup has 4 parts in a line: the cylinders, the regulators, the hoses and the torch. Gas runs from the cylinder through the regulator, down the hose and into the torch handle, where the tips shape the flame. Each joint in that line has to fit, and each part has to suit the job.
Start with the cylinders chained upright, then fit the regulators: oxygen takes a CGA540 connection on the kits in this guide, and acetylene takes a CGA200 connection on the RX WELD, VEVOR and Victor G150 kits. The Victor Journeyman is a 540/510 outfit. The VEVOR kit (on Amazon) states its acetylene regulator only fits MC-type acetylene cylinders, so check the cylinder type before you order. Fit the hoses next, oxygen to oxygen and acetylene to acetylene, then the torch handle and the tip for the job.
Check every joint for leaks before you light up: open the cylinder valves slowly and brush soapy water over each fitting, watching for bubbles that mark a leak. A joint that leaks needs tightening or a new seal, not a lit torch. Light with a striker and set the flame by eye until it burns clean and steady.
Side by side
| Gear Score | Cut capacity | Weld capacity | Hose | Regulators | |
|---|---|---|---|---|---|
| Victor Journeyman Edge 2.0 | 9.8/10 | Up to 8 in | Up to 3 in | Not stated | Ess42 series |
| VEVOR Oxy Acetylene Kit | 9.6/10 | Not stated | Not stated | 15 ft | CGA540 / CGA200 |
| Victor G150 J-P Tote Kit | 9.5/10 | Up to 1/2 in | Up to 1 1/4 in | 12.5 ft | R150-200 / R150-540 |
| RX WELD Light Duty Kit | 9.5/10 | Not stated | Up to 5/64 in (1 in with optional nozzles) | 15 ft | CGA540 / CGA200 |
Cut and weld figures are what each listing states for its own kit, and the table says so where a listing states nothing. The Victor Journeyman is the only kit here that states flash arrestors, and the Victor G150 (on Amazon) is the only kit here with a stated warranty on the torch handle.
The kits: torches for brazing through heavy cutting
Each step above needs a kit that fits it: regulators that match the cylinders, a hose that reaches the work, and tips sized to the metal. The 4 kits below cover those steps, ranked by Gear Score.
How to choose from this oxy acetylene torch setup
Match the kit to the cut. Light brazing and HVAC work need little: the RX WELD kit welds up to 5/64 inch and reaches 1 inch with optional nozzles, and the Victor G150 cuts up to 1/2 inch and welds up to 1 1/4 inches. Heavy cutting needs more: the Victor Journeyman cuts up to 8 inches and welds up to 3 inches with accessories.
Check the safety gear in the listing. Check valves block gas flowing back toward the cylinders, and flash arrestors stop a flame front from traveling back down the hose. The RX WELD and VEVOR kits state check valves, and the Victor Journeyman states built-in flash arrestors and check valves. The Victor G150 states neither.
Measure the hose against the work. The RX WELD and VEVOR kits list a 15 ft hose, and the Victor G150 lists a 12.5 ft hose. Measure the run from the cylinders to the far end of the work before you order, since a short hose means dragging the cylinders closer. The best oxy acetylene torch kit for home shop guide lines up more kits by hose length and capacity, and the plasma cutter vs oxy acetylene torch comparison covers when a torch beats a plasma cutter on thick steel.
What to skip or double-check
- Cylinders: none of the kits here list cylinders as included. RX WELD states cylinders not included, and the Victor G150 comes without tanks, so source cylinders separately.
- Oil on oxygen fittings: keep oil and grease away from oxygen connections; oxygen and oil do not mix.
- Hose pressure: the VEVOR hose is rated to 300 PSI, so check that a replacement hose is rated to the same pressure as the kit it joins.
- Regulator threads: oxygen and acetylene regulators are not interchangeable, so check the CGA number on each one before you fit it.
- Tips: the VEVOR kit includes tips number 0 and number 2, so match the tip to the thickness of the metal.
Oxy-fuel safety. An oxy acetylene torch burns hot, and the cylinders hold gas under pressure. Chain cylinders upright, keep oil away from oxygen fittings, check every joint for leaks before lighting, and clear flammable material from the area.
FAQ for welders
What regulators fit an oxy acetylene torch?
Oxygen takes a CGA540 regulator on the kits in this guide. Acetylene takes a CGA200 regulator on the RX WELD, VEVOR and Victor G150 kits, while the Victor Journeyman (on Amazon) is a 540/510 outfit. The RX WELD kit lists A-size regulators in both gases, and the VEVOR kit lists one CGA540 oxygen regulator and one CGA200 acetylene regulator. Check the CGA number on your cylinders first, since the VEVOR acetylene regulator only fits MC-type acetylene cylinders.
How long a hose do I need?
Measure the run from where the cylinders sit to the far end of the work, then add slack for moving around the bench. The RX WELD and VEVOR kits list a 15 ft hose, and the Victor G150 lists a 12.5 ft hose. A short hose means moving the cylinders after they are chained in place.
Do I need check valves or flash arrestors?
Check valves stop gas flowing back toward the cylinders, and flash arrestors stop a flame front traveling back down the hose. The RX WELD and VEVOR kits state check valves, and the Victor Journeyman states built-in flash arrestors and check valves. The Victor G150 states neither in its listing, so check what it includes before you buy.
What can a light duty kit cut?
It depends on the kit. The RX WELD kit welds up to 5/64 inch and reaches 1 inch with optional nozzles, while the Victor G150 cuts up to 1/2 inch and welds up to 1 1/4 inches. For heavier work, the Victor Journeyman cuts up to 8 inches and welds up to 3 inches with accessories.
Do the kits include gas cylinders?
None of the listings here list cylinders as included. RX WELD states cylinders not included, and the Victor G150 is sold as a tote kit without tanks. The VEVOR kit includes a cylinder holder for transport, but no cylinders are listed.
Related: heavy duty cutting torch, acetylene regulator for torch, oxy acetylene torch tips, and the metal fab tools hub.




