Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hacksaw Under $20 (2026): 5 Picks Compared

Five scored hacksaws under $20 for metal, wood and PVC: blade, TPI, frame and warranty compared, with the listings' contradictions flagged.

Best Hacksaw Under $20 (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1STANLEY 12 in D-Shape HacksawBest OverallSTANLEY 12 in D-Shape Hacksaw9.7/10View on Amazon
  2. 2WORKPRO 12 in HacksawBest Blade BundleWORKPRO 12 in Hacksaw9.6/10View on Amazon
  3. 3Great Neck Close Quarter HacksawBest Close QuarterGreat Neck Close Quarter Hacksaw9.6/10View on Amazon
  4. 4HAUTMEC Mini Hacksaw KitBest Miter KitHAUTMEC Mini Hacksaw Kit9.6/10View on Amazon
  5. 5Vanquish 10 in HacksawAdjustable-Length PickVanquish 10 in Hacksaw9.5/10View on Amazon

The bracket needs trimming before it fits, and the grinder is overkill for the cut. A hacksaw does the job quiet, with a sharp blade and a straight stroke. That is what the best hacksaw under 20 is for: cutting metal, wood and PVC in the shop without spending real money. We compared five of them on blade, TPI, frame and warranty, using only what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall STANLEY 12 in D-Shape Hacksaw: Highest Gear Score here: 12 in 24 TPI high-tension saw with 90/180 deg flush-cut positioning and a stated limited lifetime warranty Check price on Amazon
  • Best Blade Bundle WORKPRO 12 in Hacksaw: 12 in aluminum alloy frame with 45/90 deg angles and three bi-metal blades in the box: two 24T and one 18T Check price on Amazon
  • Best Close Quarter Great Neck Close Quarter Hacksaw: Compact 10 in close quarter saw with an adjustable blade brace, thumb-rest grip and a stated limited lifetime warranty Check price on Amazon
  • Best Miter Kit HAUTMEC Mini Hacksaw Kit: Mini hacksaw plus aluminum miter box for 45, 90 and 135 deg cuts, with a 24 TPI bi-metal blade and six blade angle settings Check price on Amazon
  • Adjustable-Length Pick Vanquish 10 in Hacksaw: 10 in aluminum frame with adjustable blade length, bi-metal HSS blade and a 4.64 ounce stated weight Check price on Amazon

The machines

STANLEY 12 in D-Shape Hacksaw,24 TPI

STANLEY 12 in D-Shape Hacksaw,24 TPI

STANLEY9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Full-size 12 in high-tension hacksaw with a 24 TPI carbon steel blade, 90/180 deg positioning for flush cuts, a 4-3/8 in throat, and a stated limited lifetime warranty.

Pros

  • 12 in 24 TPI carbon steel blade
  • High-tension D-handle with 90/180 deg positioning for flush cuts
  • 4-3/8 in throat depth stated
  • Limited Lifetime Warranty stated on the listing

Cons

  • Heavier than the mini picks at 1.2 pounds
  • Only one 24T blade in the box; spares are on you
  • Handle material listed as plastic or rubber only
  • Not a compact frame for close quarters
GreatNeck 80070 True Close Quarter Hacksaw Cuts

GreatNeck 80070 True Close Quarter Hacksaw Cuts

Great Neck9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Compact 10 in close quarter hacksaw with a carbon steel blade, adjustable blade brace, thumb-rest grip, aluminum frame, and a stated limited lifetime warranty.

Pros

  • Close quarter 10 in design for tight spots
  • Adjustable blade brace fits different blade sizes
  • Ergonomic grip with thumb rest
  • Limited lifetime warranty stated on the listing

Cons

  • TPI not stated; spec table's 10 teeth figure does not match the 10 in blade
  • 10 in blade is shorter than the 12 in picks
  • No spare blade in the box; the single carbon steel blade is all you get
  • Weight not stated
WORKPRO 12-inch Hacksaw with Extra 2 Bi-Metal Saw

WORKPRO 12-inch Hacksaw with Extra 2 Bi-Metal Saw

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

12 in aluminum alloy hacksaw with 45/90 deg blade angles, a TPR handle, a frame-tightness knob, and three bi-metal blades in the box.

Pros

  • Three bi-metal blades in the box: two 24T and one 18T
  • 45 and 90 deg blade angles with frame tightness knob
  • Aluminum alloy frame with TPR handle and frame-tightness knob
  • 24T blades listed for metal and plastic, 18T for wood

Cons

  • Warranty has no stated term
  • 1.3 pounds, the heaviest stated weight here
  • No miter box or angle guide included
HAUTMEC Mini Hacksaw with Miter Box

HAUTMEC Mini Hacksaw with Miter Box

HAUTMEC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Mini hacksaw kit with a 6 in 24 TPI bi-metal HSS blade, six blade angle settings, easy tension adjustment, and an aluminum miter box for angled cuts.

Pros

  • Aluminum miter box for 45, 90 and 135 deg cuts
  • Six blade angle settings on the saw
  • 24 TPI bi-metal HSS blade
  • Light alloy frame at 166 g

Cons

  • Listing states No Warranty
  • 6 in blade is the smallest here
  • Miter box suits small moldings, not wide stock
  • Single bi-metal blade in the box; no spares included
VANQUISH Hacksaw, Compact Hand Operating Hack Saw

VANQUISH Hacksaw, Compact Hand Operating Hack Saw

Vanquish9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Compact 10 in aluminum frame hacksaw with an adjustable blade length, bi-metal HSS blade, rubber handle, and a 4.64 ounce stated weight.

Pros

  • 10 in aluminum alloy frame
  • Blade length adjusts for different jobs
  • Bi-metal HSS blade included with the saw
  • Stated weight of 4.64 ounces

Cons

  • No warranty stated on the listing
  • No TPI stated on the listing
  • Single blade in the box
  • 10 in blade is shorter than the 12 in picks

Spec sheet comparison

Model Gear Score Blade TPI Frame Angles Weight Warranty
STANLEY 12 in D-Shape Hacksaw 9.7/10 12 in, carbon steel 24 TPI Solid frame 90/180 deg 1.2 pounds Limited lifetime
Great Neck Close Quarter Hacksaw 9.6/10 10 in, carbon steel Not stated Aluminum Adjustable brace Not stated Limited lifetime
WORKPRO 12 in Hacksaw 9.6/10 12 in, bi-metal (3 blades) 24T x2, 18T x1 Aluminum alloy 45/90 deg 1.3 pounds Limited, no term
HAUTMEC Mini Hacksaw Kit 9.6/10 6 in, bi-metal HSS 24 TPI Aluminum alloy 6 angles; miter box 45/90/135 166 g No warranty
Vanquish 10 in Hacksaw 9.5/10 10 in, bi-metal HSS Not stated Aluminum alloy Adjustable length 4.64 ounces Not stated

All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026. Where a listing states a figure two ways, the table shows both.

Buying guide: the best hacksaw under 20

The notes below use only what each listing states; where a listing is silent, the table says so.

Blade length and TPI

The blade sets the cut. The STANLEY and WORKPRO are 12 in saws; the Vanquish and Great Neck are 10 in; the HAUTMEC is a 6 in mini. TPI is stated on three: 24 TPI on the STANLEY and HAUTMEC, and 24T and 18T blades in the WORKPRO box. The WORKPRO listing says its 24T blades suit metal and plastic and its 18T blade suits wood. The Vanquish and Great Neck listings do not state TPI, so do not assume it. Two listings need a footnote: the Great Neck spec table lists 10 as the tooth count, but the title and bullets describe a 10-inch blade, so the safe reading is that TPI is not stated. The WORKPRO spec table lists 42 teeth, which does not match the 24T and 18T blades in its own bullets; trust the bullets.

Frame and tension

A stiff frame keeps the blade from wandering. The STANLEY lists a solid frame with high tension and a D-handle; the WORKPRO lists a high-strength aluminum alloy frame with a knob to adjust frame tightness; the HAUTMEC lists a light alloy frame with easy tension adjustment; the Vanquish and Great Neck list aluminum frames. The STANLEY adds 90 and 180 deg blade positioning for flush cuts, which none of the others claim. Blade material splits the group too: bi-metal on the HAUTMEC, Vanquish and WORKPRO, and carbon steel on the STANLEY and Great Neck.

Blade angles

Angle adjustment changes how the saw sits in tight spots. The STANLEY does 90 and 180 deg. The WORKPRO does 45 and 90 deg. The HAUTMEC offers six blade angle settings and ships an aluminum miter box with 45, 90 and 135 deg slots for angled cuts; the box is also the only guided-cutting setup here. The Vanquish lists an adjustable blade length instead of angles, and the Great Neck uses an adjustable blade brace to fit different blade sizes.

What ships in the box

At this price the extras matter. The WORKPRO includes three bi-metal blades: two 24T and one 18T. The HAUTMEC includes the saw, one bi-metal blade and the miter box. The STANLEY includes one 24T carbon steel blade and the handle. The Vanquish includes the saw with its bi-metal blade, and the Great Neck includes the saw alone. Blades are consumables, so a box with spares stretches further. Count blades when you compare: three in the WORKPRO box beats one everywhere else, and the HAUTMEC miter box is the only angle guide here.

Warranty in writing

Only two listings state a real term. The STANLEY states a Limited Lifetime Warranty and the Great Neck states a GreatNeck Limited Lifetime warranty. The WORKPRO states a Limited Warranty with no term given. The HAUTMEC states No Warranty, and the Vanquish listing states none. Where no term is stated, the warranty column scores zero. The two lifetime terms come from the name-brand listings; the others lean on blade count or kit contents for value.

Before You Strike an Arc

  • Check the blade teeth face forward and the frame tension is snug before the first cut; the HAUTMEC and WORKPRO listings describe tension adjustment on the frame.
  • Match the blade to the material: the WORKPRO listing pairs its 24T blades with metal and plastic and its 18T blade with wood.
  • Set the blade angle for the cut: 90 or 180 deg on the STANLEY for flush cuts, 45 or 90 deg on the WORKPRO; the HAUTMEC offers six settings.
  • Buy spares in the right length: 12 in for the STANLEY and WORKPRO, 10 in for the Vanquish and Great Neck, 6 in for the HAUTMEC, per the listings.
  • When the cut starts to wander, swap the blade rather than forcing the stroke; blades are the consumable here.

FAQ for welders

Can a hacksaw cut steel?

Yes, per the listings here. The HAUTMEC lists steel pipe among its materials, the STANLEY lists metal as its surface recommendation, the Vanquish lists sheet metal, and the Great Neck lists brass. A fresh blade and steady pressure do the work; the listings do not promise speed. The HAUTMEC even lists frozen materials among its uses.

What TPI hacksaw blade should I use for metal?

Go by the listing, not the habit. The STANLEY and HAUTMEC list 24 TPI blades, and the WORKPRO includes 24T blades it lists for metal and plastic alongside an 18T blade it lists for wood. The 18T blade is the coarse option in this group. The Vanquish and Great Neck listings do not state TPI, so pick a blade whose TPI is printed on its own listing.

Do I want a full-size or a mini hacksaw?

It depends on the cut. The 12 in STANLEY and WORKPRO give the longest stroke for general shop cutting. The 10 in Vanquish and Great Neck and the 6 in HAUTMEC fit tight spots: the Great Neck is built as a close quarter saw, and the Vanquish listing says cutting accuracy holds in tight spaces.

What does blade angle adjustment do?

It lets the blade sit flat or angled for the situation. The STANLEY does 90 and 180 deg for flush cuts, the WORKPRO does 45 and 90 deg, and the HAUTMEC offers six settings plus a miter box with 45, 90 and 135 deg slots. The Great Neck instead uses an adjustable brace to fit different blade sizes.

Which hacksaw here has a warranty?

The STANLEY states a Limited Lifetime Warranty and the Great Neck states a GreatNeck Limited Lifetime warranty. The WORKPRO states a Limited Warranty with no term given, the HAUTMEC states No Warranty, and the Vanquish listing states none.

Related: our hacksaw blade picks, our hacksaws for cutting steel, our jigsaw vs hacksaw guide, and our hacksaw blades for stainless steel.

Scoring, line by line

Each saw is scored on performance, build, value, safety listing and warranty. None of these listings states safety features, so the safety column scores zero across the group and the order comes from the other four. Value weighs what ships in the box: three blades beat one, and a miter box counts as kit. A spec the listing does not publish scores nothing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
STANLEY 12 in D-Shape Hacksaw 9.7 32 21 21 n/a 4
Great Neck Close Quarter Hacksaw 9.6 28 20 21 n/a 4
WORKPRO 12 in Hacksaw 9.6 30 20 22 n/a 0
HAUTMEC Mini Hacksaw Kit 9.6 29 20 22 n/a 0
Vanquish 10 in Hacksaw 9.5 27 19 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Metal Fab Tools ·

Hacksaw Blade Sizes Explained

Hacksaw blade sizes are length, width, thickness and teeth per inch, and the packs here cover 10 and 12 inch blades in 18, 24…