Best Metal Scribe Under $10 (2026): 4 Shop Picks for Layout
Four metal scribes under $10 compared for layout and marking work, ranked by tip material, pack size, build quality and warranty terms.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGeneral Tools 80C9.6/10View on Amazon - 2
Best ValueHINGTAI Gold 2-Pack9.6/10View on Amazon - 3
Best 2-PackNEPAK B-2 2-Pack9.6/10View on Amazon - 4
Best Simple PickDUMEALAGR Silver 2-Pack9.5/10View on Amazon
The fit-up is marked, the cut line is next, and a dull pencil will not cut it on steel. The best metal scribe under 10 is the one that leaves a line you can see and keeps its point. We compared tungsten carbide scribers, a two-point steel scribe on tip material, pack size, build and warranty. This is a cheap tool, but the wrong one still wastes money when the tip snaps on the first job.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
- Best Overall General Tools 80C: Two-point hardened steel scribe with limited lifetime warranty. Check price on Amazon
- Best Value HINGTAI Gold 2-Pack: Two carbide scribers plus 12 replacement tips and a 90-day warranty. Check price on Amazon
- Best 2-Pack NEPAK B-2 2-Pack: Two carbide scribers with magnet and 12 replacement tips. Check price on Amazon
- Best Simple Pick DUMEALAGR Silver 2-Pack: Two carbide scribers with knurled anti-slip handles. Check price on Amazon
The machines

General Tools 80C Fixed Two-Point Scriber
Fixed two-point scriber with hardened steel points, one straight and one bent at 90 degrees.
Pros
- Two points: straight and 90-degree bent
- Hardened and ground steel points
- Knurled aluminum body
- Limited lifetime warranty stated
Cons
- Steel points, not tungsten carbide
- Single tool; no replacements stated
- Fixed points; nothing to swap when dull
- No tip hardness figure stated

2 Pcs Tungsten Carbide Tip Scriber With 12
Two gold tungsten carbide scribers with magnets, pocket clips and 12 replacement tips.
Pros
- Tungsten carbide tips
- 2 scribers plus 12 replacement tips
- Magnet picks up small parts
- 90-day warranty stated
Cons
- No length stated
- Gold finish is cosmetic
- 90-day term is brief
- No storage case stated

NEPAK 2 Pack Tungsten Carbide Scriber
Two tungsten carbide scribers with magnets and 12 replacement tips in a pocket-clip design.
Pros
- Tungsten carbide tips
- 2 scribers plus 12 replacement tips
- Magnet for parts and filings
- Knurled aluminum handle
Cons
- No warranty stated
- No protective hat stated
- Tips are the only stated spares
- No case stated

Tungsten Carbide Tip Scriber Marking Engraving Pen
Two silver tungsten carbide scribers with knurled handles and pocket clips.
Pros
- Tungsten carbide tips
- Two scribers in the pack
- Knurled anti-slip handle
- Chuck reverses tip for storage
Cons
- No replacement tips stated
- No warranty stated
- No magnet
- No length stated
Spec sheet comparison
| Scribe | Gear Score | Tip Material | Count | Length | Warranty |
|---|---|---|---|---|---|
| General Tools 80C | 9.6/10 | Hardened steel | 1 | 8-7/16 in | Limited Lifetime |
| HINGTAI Gold 2-Pack | 9.6/10 | Tungsten carbide | 2 + 12 tips | Not stated | 90 day |
| NEPAK B-2 2-Pack | 9.6/10 | Tungsten carbide | 2 + 12 tips | 5.39 in | Not stated |
| DUMEALAGR Silver 2-Pack | 9.5/10 | Tungsten carbide | 2 | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (22 October 2026).
How to choose the best metal scribe under 10
Carbide tip or steel point?
Three picks use tungsten carbide tips: the NEPAK, the HINGTAI and the DUMEALAGR. Carbide holds its edge on hardened steel, stainless and ceramics, which is the whole job here. The General Tools 80C uses hardened and ground steel points instead; steel is fine for mild steel and layout work but will need touching up sooner on hard stock. If the work is mostly hardened material, pick carbide. For general shop marking, steel does the job. The DUMEALAGR adds a chuck that reverses the carbide point for safe storage, a small detail that keeps the tip out of the toolbox clutter.
How many tips do you get?
Count the spares before you buy. The NEPAK and HINGTAI each pack two scribers plus 12 replacement tips, which is the best tip count in this list. The DUMEALAGR gives two scribers with no replacement tips stated. The General Tools is a single tool with no spares; when the point goes, you dress it or replace the tool. For a busy bench, the 12-tip packs win on value. Swapping a tip beats dressing a dull point on the grinder, and it beats buying a whole new scribe. See the best metal scribe picks for the full-price range.
Swapping a tip should be quick. The HINGTAI pen head rotates to replace the marking tip, and the pen is small and easy to store in a tool bag. The NEPAK pairs its tips with a pocket clip and a knurled aluminum handle for control during long marking sessions. The DUMEALAGR has no replacement tips stated, so its reversible chuck covers the point for storage instead.
Magnet and pocket clip
Small features earn their keep. The NEPAK and HINGTAI both carry a permanent magnet that picks up small parts and recovers steel filings from tight spots. Both also list a pocket clip, as does the DUMEALAGR. A scribe that lives in the shirt pocket gets used; one that lives in a drawer does not. The HINGTAI adds a protective hat over the tip, which matters in a crowded toolbox. A magnet will not replace a proper parts tray, but for fishing a dropped screw out of a chassis it earns its keep. Check the best combination square under 20 for another layout staple.
How long should it last?
A scribe is a consumable with a handle. The carbide tip does the wearing; the handle just needs to hold it tight and survive the toolbox. Knurled aluminum handles on the NEPAK, HINGTAI and General Tools give a solid grip that will outlast several tips. The DUMEALAGR’s reversible chuck doubles the useful life of its point before the tool is done. The General Tools has no replaceable parts at all, which is why its lifetime warranty matters more there than on the tip packs.
What does the warranty tell you?
At this price a warranty is a signal, not a promise. The General Tools 80C states a limited lifetime warranty, which is the strongest backing in this list and fits a tool with no consumable parts. HINGTAI states 90 days, enough to cover a dud out of the box. The NEPAK and DUMEALAGR state no warranty term at all. For a tool this cheap, the warranty ranks behind tip material and spares, but it breaks ties.
How do you store and carry a scribe?
A scribe lives in a pocket or a toolbox, so storage matters as much as the tip. The HINGTAI has a protective hat over the tip, and its pen head rotates to swap in a replacement tip. The DUMEALAGR chuck reverses the carbide point into the handle when the tool is not in use, and its pocket clip keeps it handy like a pen. The NEPAK, HINGTAI and DUMEALAGR all list pocket clips, and the General Tools measures 8-7/16 inches long, small enough for a toolbox, a shirt pocket or a tool belt.
What materials and jobs do they cover?
The jobs differ too. The NEPAK marks wood, metal and plastic, the HINGTAI marks metal, glass, ceramics, wood, jewelry, marble and walls, and the DUMEALAGR covers hardened materials such as metal, stainless steel, glass, ceramics and wood. The General Tools also handles lifting O-rings and gaskets and cleaning small grooves in automotive and machining work, where the bent point reaches what fingers cannot. Match the tip to the stock: carbide for the hard materials, steel for mild steel layout.
The General Tools also stands apart as a two-point tool: one straight point and one 90-degree bent point, both hardened and ground steel, on a knurled aluminum body. The bent point reaches into grooves and lifts O-rings and gaskets where fingers cannot reach, which is shop work rather than layout. The NEPAK and HINGTAI pens, by contrast, take replaceable tips, so the point itself is the consumable and the handle stays. Pick the two-point steel tool for varied shop tasks and a carbide pen for marking hard stock.
Before You Strike an Arc
- Check the tip on arrival: carbide should be sharp and seated tight in the handle.
- The HINGTAI includes a protective hat; keep it on in the toolbox.
- Check the magnet holds before trusting it with small parts.
- Replacement tips: NEPAK and HINGTAI include 12 each; the others do not state replacements.
- Dress a steel point on a fine stone; do not grind carbide tips, replace them.
- Keep the scribe dry; surface rust on the point dulls the line.
FAQ for welders
What is a metal scribe used for?
A scribe scratches layout lines into metal, glass and ceramics where a pencil will not show. Welders use it to mark cut lines, hole centers and fit-up references. The line stays put through handling, which a marker will not. For layout that survives the trip from bench to brake, the scribe is the right tool.
Tungsten carbide or steel?
Carbide is harder and holds its point longer on hardened steel and stainless. Steel points are cheaper to make and fine for mild steel layout. Three picks here use carbide tips; the General Tools uses hardened steel points. Carbide also handles glass and ceramics, where steel skates. For mild steel alone, either works.
Do any of these come with replacement tips?
Yes. The NEPAK and HINGTAI each include 12 replacement tips alongside two scribers. The DUMEALAGR and General Tools do not state replacement tips. The DUMEALAGR has a reversible point, which effectively doubles the tip life before you need a new tool.
Which has the best warranty?
The General Tools 80C states a limited lifetime warranty, the strongest term here. HINGTAI states 90 days. The NEPAK and DUMEALAGR do not state a warranty term. At this price, treat the warranty as a tiebreaker rather than the deciding factor.
Can I use a scribe on glass or ceramics?
The NEPAK, HINGTAI and DUMEALAGR listings all name glass and ceramics among the materials. Use light pressure and a straightedge; carbide will score glass, but it will also snap it if forced. The NEPAK and HINGTAI both name glass and ceramics in their application lists.
Related: best metal scribe for the full-price picks, best combination square under 20 for layout, and the metal fab tools hub.
Scoring, line by line
The Gear Score weighs performance, build, value, safety and warranty. For scribers, safety covers stated standards such as ANSI or UL; none of these listings states any, so safety scores are zero across the board. Two of the four state a warranty term. Value weighs what comes in the package against the ceiling: two scribers plus a dozen tips beats a single tool at the same price. The weights are fixed for every product in the roundup.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| General Tools 80C | 9.6 | 26 | 21 | 19 | n/a | 4 |
| HINGTAI Gold 2-Pack | 9.6 | 30 | 20 | 21 | n/a | 2 |
| NEPAK B-2 2-Pack | 9.6 | 30 | 20 | 22 | n/a | 0 |
| DUMEALAGR Silver 2-Pack | 9.5 | 28 | 19 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




