Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Combination Square Under 20 (2026): 5 Picks for the Shop

Five combination squares under 20 for metal layout, compared on blade length, graduations, head, lock and extras, and scored from what each listing states.

Best Combination Square Under 20 (2026): 5 Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Johnson 400EM-SBest OverallJohnson 400EM-S9.6/10View on Amazon
  2. 2Swanson TC130Best 6 InchSwanson TC1309.7/10View on Amazon
  3. 3GRENPRO 7 and 12 SetBest Two-Square SetGRENPRO 7 and 12 Set9.6/10View on Amazon
  4. 4Mr. Pen 12 InchBest Simple 12 InchMr. Pen 12 Inch9.6/10View on Amazon

Laying out a bracket means marking a straight line, checking a corner and finding center before the welder comes out. This guide covers the best combination square under 20: five layout squares for the home and farm shop, compared on blade length, graduations, head, lock and extras, and scored on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Johnson 400EM-S: Inch and metric etched graduations to 1/32 in, CNC machined head with auto-lock, level vial and a 1 year warranty. Check price on Amazon
  • Best 6 Inch Swanson TC130: CNC-machined zinc head, etched 1/8 and 1/16 in graduations, acrylic vial, depth gauge use and a 1 year warranty. Check price on Amazon
  • Best Two-Square Set GRENPRO 7 and 12 Set: A 7 in rafter square plus a 12 in combination square with metric and inch scales, metal scriber and bubble vial. Check price on Amazon
  • Best Simple 12 Inch Mr. Pen 12 Inch: Stainless 12 in blade with inch and cm graduations to 1/32 in, brass scriber and level included. Check price on Amazon

The machines

Swanson 6 in. Combination Square, Zinc Head

Swanson 6 in. Combination Square, Zinc Head

Swanson9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 in combination square with a CNC-machined zinc head, 45 degree and 90 degree working faces, etched stainless blade in 1/8 and 1/16 in, acrylic vial and depth gauge use, with a 1 year warranty.

Pros

  • CNC-machined zinc head with 45 degree and 90 degree faces
  • Etched 1/8 and 1/16 in graduations on a stainless blade
  • Acrylic block vial and depth gauge use
  • 1 year warranty stated

Cons

  • No safety listing stated
  • Inch graduations only, no metric
  • 6 in blade only
Johnson Level & Tool 400EM-S Heavy Duty

Johnson Level & Tool 400EM-S Heavy Duty

Johnson9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 in inch/metric combination square with a CNC machined head, etched 1/8, 1/16 and 1/32 in graduations plus millimeter marks, auto-lock blade and level vial, with a 1 year warranty.

Pros

  • Etched 1/8, 1/16 and 1/32 in graduations plus millimeter marks
  • CNC machined head with auto-lock blade assembly
  • Built-in level vial for level and plumb checks
  • 1 year warranty stated

Cons

  • No safety listing stated
  • Accuracy claimed but no figure stated
  • 12 in blade only, no 6 in option in this listing
Combination Square Set, 7 & 12 Inch Aluminum Zinc

Combination Square Set, 7 & 12 Inch Aluminum Zinc

GRENPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-piece set with a 7 in rafter square and a 12 in combination square in aluminum zinc alloy, metric and inch scales, metal scriber and bubble vial.

Pros

  • Two squares: 7 in rafter and 12 in combination
  • Metric and inch scale markings
  • Metal scriber and bubble vial included
  • Locking anti-slip textured edge

Cons

  • No warranty term stated
  • Graduation fineness not stated
  • Alloy head, not CNC machined like the top picks
  • No safety listing stated
Mr. Pen- Combination Square, 12" Combo Square

Mr. Pen- Combination Square, 12" Combo Square

Mr. Pen9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 in combination square with a stainless blade marked in inch and cm to 1/16, 1/8 and 1/32 in, spring-loaded brass bolt, brass scriber and level.

Pros

  • Inch and cm graduations to 1/32 in on a stainless blade
  • Brass scriber and level included
  • Spring-loaded brass bolt
  • 12 in blade for long layout lines

Cons

  • No warranty term stated
  • Head material not stated
  • No safety listing stated
  • Model and part number fields contain only '..'
Arrow Combination Square

Arrow Combination Square

Arrow Fastener9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 in combination square with a stainless blade in dual metric and SAE markings to 1/16 and 1/32 in, zinc alloy body, brass screw and bubble level.

Pros

  • Dual metric and SAE markings to 1/16 and 1/32 in
  • Stainless blade stated as corrosion resistant
  • Bubble level built in
  • Copper draw pin screwed in to prevent loosening

Cons

  • No warranty term stated
  • No safety listing stated
  • 6 in blade only

Other welders and gear to compare

Spec sheet comparison

Square Gear Score Blade Graduations Head Extras Warranty
Johnson 400EM-S 9.6/10 12 in stainless 1/8, 1/16, 1/32 in and mm, etched CNC machined, auto-lock Level vial 1 year
Swanson TC130 9.7/10 6 in stainless 1/8 and 1/16 in, etched CNC-machined zinc, brass bolt Acrylic vial, depth gauge 1 year
GRENPRO 7 and 12 Set 9.6/10 12 in stainless, 7 in rafter Metric and inch, fineness not stated Aluminum zinc alloy, locking Metal scriber, bubble vial Not stated
Mr. Pen 12 Inch 9.6/10 12 in stainless 1/16, 1/8, 1/32 in and cm Not stated, brass bolt Brass scriber, level Not stated
Arrow 6 Inch 9.5/10 6 in stainless 1/16 and 1/32 in, metric and SAE Zinc alloy, brass screw Bubble level, copper draw pin Not stated

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). Where a listing states a figure two ways, the table shows both.

How they were scored

Each square is scored on performance, build, value, safety and warranty, using only what the listing publishes. A spec the listing does not publish scores nothing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Swanson TC130 9.7 29 21 21 n/a 3
Johnson 400EM-S 9.6 30 21 21 n/a 0
GRENPRO 7 and 12 Set 9.6 28 19 22 n/a 0
Mr. Pen 12 Inch 9.6 28 19 21 n/a 0
Arrow 6 Inch 9.5 27 19 21 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

Buying guide: best combination square under 20

Five squares answer the best combination square under 20 keyword. What differs is blade length, graduations, head, lock and extras, so here is how to weigh each.

Blade length: 6 inch or 12 inch

Two listings give 6 in blades and two give 12 in blades, while the GRENPRO set includes a 7 in rafter square with its 12 in combination square. A 6 in square rides in an apron pocket and suits small brackets and tight fit-up. A 12 in square spans wider plate and longer layout lines. If the bench work is mostly small brackets and repairs, the 6 in squares do everything the 12 in squares do in less space. Pick the length that matches the work on your bench.

Graduations

The Swanson lists graduations etched in 1/8 and 1/16 in, and the Johnson lists etched 1/8, 1/16 and 1/32 in plus millimeter graduations. The Mr. Pen and Arrow listings give 1/32 in fineness as well, in inch and cm or metric and SAE. Finer graduations help with tight fit-up, and inch plus metric on one blade suits mixed hardware. Millimeter marks matter when the fasteners are metric; the Johnson and Arrow listings give metric alongside inch, which saves reaching for a second tool. Note the Johnson bullets say etched while its spec table says stamped; the table here follows the bullets.

Head, lock and vial

The Swanson and Johnson heads are CNC machined; the Johnson adds an auto-lock blade assembly and the Swanson uses a brass bolt, while the Arrow uses a brass screw and the GRENPRO a locking textured edge. The lock is the part that wears: a brass bolt or screw tightens without galling the blade, and the Johnson auto-lock is the only one-handed option here. A level vial ships with four of the five listings: Swanson, Johnson and Arrow, plus the GRENPRO set. A brass scriber ships with the Mr. Pen, and a metal scriber with the GRENPRO set; see the best metal scribe guide for more on layout marking.

Scriber, level and other extras

Two listings include a scriber: brass with the Mr. Pen, metal with the GRENPRO set. A scriber marks steel where a pencil will not show, and the copper draw pin on the Arrow keeps the handle from loosening. Vials come as an acrylic block on the Swanson, a built-in level on the Johnson and Arrow, and a single bubble vial in the GRENPRO set. Extras do not replace the square, but they save a trip across the shop.

Warranty in writing

Two listings state a 1 year warranty against defects in material and workmanship: Swanson and Johnson. The other three state no warranty term. A written term matters when the head or lock wears; without one, the listing gives no promise to stand behind. Both warranted picks state the same 1 year term, so the choice between them comes down to blade length and graduations.

Before You Strike an Arc

  • Check the head locks square: hold it against a known 90 degree reference and sight the blade before trusting it on plate.
  • Confirm the graduations are etched and readable under shop light; the Swanson and Johnson listings state etched blades.
  • Check the lock: slide the head along the blade, tighten the bolt or screw, then pull to make sure it holds the mark.
  • Check the vial if your pick has one; the Swanson, Johnson, Arrow and GRENPRO listings include a level vial.
  • Keep the scriber point protected; the Mr. Pen and GRENPRO listings include one, and a sharp point dings easily in a toolbox.

FAQ for welders

What is a combination square used for in a fab shop?

Marking 90 degree and 45 degree lines, checking corners for square, and scribing layout lines on plate and tube. The head also works as a depth gauge and, with the vial, for level and plumb checks. It is the layout tool that lives in the apron pocket.

Should I get a 6 inch or a 12 inch square?

Get the 6 in for small brackets, tight fit-up and pocket carry; the Swanson and Arrow listings cover that size. Get the 12 in for wider plate and longer lines; the Johnson and Mr. Pen listings cover that size. The GRENPRO set gives both a 7 in rafter square and a 12 in combination square in one buy.

Are etched graduations better than stamped?

Etched marks are cut into the blade and resist wear from handling and shop grime. The Swanson listing states etched graduations, and the Johnson bullets state etched graduations while its spec table says stamped. Stamped marks can still serve, but etched is the safer claim to shop for.

Do I need the level vial?

Not for pure layout, but it helps when setting work level and plumb without reaching for another tool. Four of the five listings here include a vial. If the work never needs a level check, the vial adds nothing.

Can a combination square mark 45 degree miters?

Yes. The square head carries a 45 degree face along with the 90 degree face; the Swanson, Johnson, Arrow and GRENPRO listings all state 45 degree and 90 degree working faces. Slide the head, lock it, and scribe along the angled face.

Related: best combination square for metal work, best metal scribe, cast iron vs steel welding square and the metal fab tools hub. For holding work at 90 degrees, see best welding clamps for fabrication.

More buying guides