Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Can You Paint Over Rust Converter? What to Use First

Yes, once rust converter has dried and set, a topcoat can go over it, and the converters below handle the prep, with three of them doubling as primer.

Can You Paint Over Rust Converter? What to Use First
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Seymour 16-45 Rust Converter, BlackSeymour 16-45 Rust Converter, Black9.5/10View on Amazon
  2. 22-in-1 Rust Converter & Metal Primer2-in-1 Rust Converter & Metal Primer9.5/10View on Amazon
  3. 3Ospho Metal Treatment GallonOspho Metal Treatment Gallon9.4/10View on Amazon
  4. 4COATEZ 2-in-1 Rust Converter & Metal PrimerCOATEZ 2-in-1 Rust Converter & Metal Primer9.4/10View on Amazon

A rusted gate hinge or a trailer fender comes back from the yard with the rust knocked off and a coat of converter on it, and the next question is whether paint can go over it. Can you paint over rust converter? Yes, once the converter has dried and set, a topcoat can go over it. The wait and the prep depend on the converter, so read the dry time on the product you use.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Seymour 16-45 Rust Converter, Black

Seymour 16-45 Rust Converter, Black

Seymour9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A spray rust converter that turns rust on iron and steel into a black, paintable primer, dries to the touch in 10 minutes and accepts topcoats after 24 hours.

Pros

  • Dries to the touch in 10 minutes and accepts topcoats after 24 hours
  • Converts rust on iron and steel into a black, paintable primer
  • Cuts sanding and wire brushing; just remove loose rust and spray
  • Seals out moisture, and the maker says it prevents future rust growth

Cons

  • Suits iron and steel only, so it does not cover other metals
  • Topcoat must wait 24 hours, so the job spans more than a day
  • Loose rust still has to come off before spraying
  • No warranty term is stated
2-in-1 Rust Converter & Metal Primer

2-in-1 Rust Converter & Metal Primer

Autosel9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 70 oz converter and primer that dries to the touch in 15 minutes, is fully set within 24-48 hours, and takes brush, roller or spray with no primer needed.

Pros

  • 70 oz size suits large jobs such as frames and trailers
  • Dries to the touch in 15 minutes and is fully set within 24-48 hours
  • Applies by brush, roller or spray, with no primer needed
  • Withstands temperatures up to 350°F and resists UV exposure, per the maker

Cons

  • Full set takes 24-48 hours, so the coating is not fully set the same day
  • Needs 2-3 thin coats, so one pass does not finish the job
  • Black finish only, so the topcoat sets the final color
  • 70 oz is a large size for a small repair
Ospho Metal Treatment Gallon

Ospho Metal Treatment Gallon

Ospho9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 gallon metal treatment that prepares rusted metal for paint, weighs 11 lb, and works indoors and on cars, trucks, boats and more.

Pros

  • 1 gallon size suits large jobs and repeat use
  • Prepares the metal surface for paint
  • Compatible with most vehicle paints, decals, wiring and hoses, per the maker
  • High potency formula that can be used indoors, per the maker

Cons

  • Weighs 11 lb, so the gallon is heavy to carry around the shop
  • A gallon is more than a small repair needs, so it suits larger jobs or repeat use
  • Leaves no primer coat behind, so it does not double as primer like the other converters here
  • No warranty term is stated
COATEZ 2-in-1 Rust Converter & Metal Primer

COATEZ 2-in-1 Rust Converter & Metal Primer

COATEZ9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6.35 oz converter and primer with a built-in brush that covers up to 21.5 sq ft, made for small rust repairs on fences, gates and mailboxes.

Pros

  • Built-in brush reaches corners and edges with no separate brush or tray
  • Covers up to 21.5 sq ft, sized for touch-ups and small repairs
  • Includes sandpaper and disposable gloves in the box
  • Water-based formula with low odor for indoor and outdoor use

Cons

  • At 6.35 oz it is a small bottle, so a large job needs extra bottles
  • Made for lightly to moderately rusted metal, so heavy rust is outside its stated use
  • Needs loose rust removed and the surface lightly sanded first
  • Brush applicator suits small areas, not broad panels

Can you paint over rust converter?

Yes. Rust converter changes rust into a coating that paint can grip, and several converters on this page double as primer: Seymour dries to a black, paintable primer, Autosel calls itself a 2-in-1 converter and primer, and COATEZ is also a 2-in-1 converter and primer. Ospho prepares the metal surface for paint. The topcoat goes on after the converter has dried and set, not while it is still wet.

How rust converter works

Converter reacts with rust on the metal and turns it into a stable coating. Seymour says its spray penetrates rust on iron and steel and chemically transforms it into a protective black coating. Autosel says its coating chemically converts rust into a solid, paintable surface while sealing out moisture and air. COATEZ says its coating helps isolate moisture and oxygen from metal surfaces. That converted surface is what the topcoat bonds to, which is why the converter has to dry and set before paint goes over it.

How to paint over it, step by step

  • Knock off loose rust. Seymour says to remove loose rust and spray, and COATEZ says to remove loose rust and lightly sand the surface first.
  • Apply the converter. Seymour sprays on, COATEZ brushes (on Amazon) on with its built-in brush, and Autosel takes a brush, roller or spray.
  • Wait for it to dry and set. Seymour dries to the touch in 10 minutes and accepts topcoats after 24 hours, and Autosel dries to the touch in 15 minutes and is fully set within 24-48 hours.
  • Topcoat it. Once the converter has set, paint over it with a topcoat that suits the metal and the job.

When no dry time is given, follow the instructions on the product you use before topcoating. Our how to use rust converter guide covers the full prep routine.

The converters side by side

Seymour 16-45 Autosel 2-in-1 Ospho Gallon COATEZ 2-in-1
Size Not stated 70 Oz 128 Fl Oz (1 gallon) 6.35 Oz
Dry to the touch 10 minutes 15 minutes Not stated Not stated
Topcoat after 24 hours Not stated (fully set within 24-48 hours) Not stated Not stated
Finish Black, paintable primer Black, paintable surface Prepares metal for paint White protective coating
Application Spray Brush, roller or spray Not stated Built-in brush
Coverage Not stated Not stated Not stated Up to 21.5 sq ft
Suits Iron and steel Automotive, marine, fence, tools Cars, trucks, boats, RVs Fences, gates, mailboxes, trailers

Seymour and Autosel state dry times, and only Seymour states a topcoat time. Check the table for size, finish and coverage before you pick one.

The gear for this job

The converter is the gear that turns rust into a primer coat, so the pick comes down to size, dry time and how it goes on.

FAQ for welders

How long should I wait before painting over rust converter?

Wait for the converter to dry and set. Seymour accepts topcoats after 24 hours. Autosel is fully set within 24-48 hours, but that is its full-set time, not a topcoat time. When no time is given, follow the instructions on the product you use before topcoating.

Do I need primer over rust converter?

Not with the converters here that double as primer. Seymour dries to a black, paintable primer, and Autosel and COATEZ are 2-in-1 converter and primer products. Ospho prepares the metal surface for paint, so follow its instructions before topcoating.

Do I have to sand before using rust converter?

Remove loose rust first. Seymour says to remove loose rust and spray, and COATEZ says to remove loose rust and lightly sand the surface. Autosel says no sanding is required.

Can I use rust converter on a car or trailer?

Yes, with the right product. Seymour lists vehicles and trailers, Autosel lists automotive frames and trailers, and Ospho lists cars, trucks, boats and RVs. Match the converter to the metal and the job.

What if I paint over rust converter too soon?

The topcoat may not bond to a coating that is still wet. Wait for the dry time the maker states, and when no time is given, follow the instructions on the product you use.

Related: best rust converter for truck frame, best rust converter that can be painted over, and the metal fab tools guides.

More buying guides

Metal Fab Tools ·

How to Use Rust Converter on Metal

How to use rust converter on rusted metal, from loose-rust prep through thin coats and drying, with 4 products compared by size, form and…