Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Drill Bit Size R: Letter Size Diameter Chart

Drill bit size R is a letter-gauge size from the A to Z range, and this guide explains how letter, fractional and numbered sizes fit together and where to find R in a set.

Drill Bit Size R: Letter Size Diameter Chart
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BOSCH CO21B 21-Piece Assorted Set with Included Case CobaltBOSCH CO21B 21-Piece Assorted Set with Included Case Cobalt9.7/10View on Amazon
  2. 2MACXCOIP 29PcsMACXCOIP 29Pcs9.7/10View on Amazon
  3. 3MACXCOIP 60PcsMACXCOIP 60Pcs9.7/10View on Amazon

A hole that needs to land a clean fit starts with the bit, and a bit marked with a letter instead of a fraction sends most shop owners to the chart on the case. Drill bit size R is a letter-gauge size, one of the letter sizes that run from A to Z in a full letter set. This guide explains how letter, fractional and numbered sizes fit together, what the listings state about them, and where to find R in a set.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Drill bit size R in one paragraph

Drill bit size R is a letter-gauge drill bit size. Letter sizes run from A to Z, and R sits between Q and S in that order. The listings reviewed here state no diameter for R, so the exact figure comes from the size index printed on the set case or a letter-size chart, not from a listing. What the listings do state in full is one letter size as a worked example: size F measures 0.257 inch in diameter and 4-1/8 inch in length on the Century bit, and the TopLine listing gives F with 6.53 mm. That is how letter sizes map to diameters: each letter is a fixed size, and the chart gives the figure.

Side by side

Letter sizes Fractional sizes Numbered sizes
Range A to Z 1/16 to 1/2 inch #1 to #60
Count in a 115-piece set 26 29 60
Step between sizes Letter gauge steps 1/64 inch Numbered gauge steps
Example size stated F at 0.257 inch 1/8 inch Not stated
Sets that carry them 26-piece letter sets and 115-piece sets 115-piece sets and the Bosch 14-piece set 115-piece sets
Point angle stated 135 degrees, where stated 135 degrees, where stated 135 degrees, where stated

Letter, fractional and numbered sizes cover overlapping ranges of small bits in different systems, and a full set carries them all. Sizes are listed as the maker states them, so always follow the size printed on the bit and the case index rather than a size from another set.

What the listings state about letter sizes

  • A full letter range runs A to Z. The HIDOTOL letter set carries 26 letter sizes, from A to Z, in a metal case with a size index.
  • Size F is the worked example. Century lists F at 0.257 inch diameter and 4-1/8 inch length, and TopLine lists F with 6.53 mm.
  • A full set holds every system. A 115-piece set holds 29 fractional sizes, 26 letter sizes and 60 numbered bits, from #1 to #60.
  • Cobalt is one material listed. M35 bits list 5% cobalt, and the Bosch M42 fractional set lists 8% cobalt and claims 10x life vs standard bits.
  • Split points are 135 degrees on the listings that state a point angle. Those listings list a 135 degree split point, made to start without walking. The HIDOTOL and GuardPro listings also state a round straight shank.

The HIDOTOL 26-piece letter set and the Drill America 26-piece set carry the letter range on its own, for a shop that already holds fractional and numbered bits. The 115-piece sets from COMOWARE, HIDOTOL, GuardPro and Yougfin carry the full range in one case.

Fractional and numbered sizes

Fractional sizes run from 1/16 inch to 1/2 inch in 1/64 inch steps, with 29 sizes in a full set. The Bosch 14-piece (on Amazon) set lists sizes across that range, from 1/16 inch through 1/2 inch. Numbered sizes run from #1 to #60, with 60 bits in a full set, and they sit alongside the fractional and letter sizes in the same case.

Letter sizes sit between the fractional sizes on the chart: each letter is a fixed diameter, and the chart lines the letters up against the nearest fractions. That is why a set with every system needs no guessing: the size index on the case gives the letter, the fraction and the number together.

How to find size R in a set

Start with the case, not the bit. Open the metal case and read the size index: the letter range runs A to Z in order, and R sits between Q and S. Pull the bit stamped R and check the stamp against the index before drilling. In a 115-piece set, the case index lists the letter sizes alongside the fractional and numbered bits.

For a starter set, the best twist drill bit set guide and the best drill bit set for wood and metal guide cover sets that carry the full range, and the standard drill bit size chart lays out the fractional sizes beside the letter and numbered sizes.

Drilling with a letter bit

A letter bit drills like any twist bit in its size: clamp the work, wear eye protection, and let the 135 degree split point start the hole without walking, on bits that list that point angle. Clear chips as you go, and keep the bit cool in hard metal so the edge lasts. For holes that a twist bit cannot reach, the step drill bit vs hole saw for sheet metal guide covers the options.

FAQ for welders

What diameter is drill bit size R?

The listings reviewed here state no diameter for R, so this guide gives no figure for it: check the size index on the set case or a letter-size chart. As a worked example of how letter sizes map to diameters, size F measures 0.257 inch on the Century bit, and the TopLine listing gives F with 6.53 mm.

Is size R bigger than size Q?

Yes. Letter sizes run A to Z in order, and R comes after Q in that order, so R is the larger letter size. Each letter is a fixed diameter, and the chart gives the figure for each one.

What set includes size R?

Any set with the full A to Z letter range. That means a 26-piece letter set, such as the HIDOTOL letter set or the Drill America letter set, or a 115-piece set that lists 26 letter sizes alongside its fractional and numbered bits.

Are letter bits for metal or wood?

Both, on the listings here. M35 cobalt letter bits are listed for hardened metal, stainless steel and cast iron, and the same listings name wood and plastic too. The Bosch M42 fractional set, which carries fractional sizes rather than letter sizes, is listed for stainless steel, cast iron, titanium, light-gauge metal and aluminum. Match the bit material to the metal: cobalt bits are the ones the listings point to for hard metals.

What point angle do letter bits use?

A 135 degree split point, on the listings that state a point angle. The split point is self-centering, so the bit starts without walking, and on the HIDOTOL and GuardPro listings the fully ground twist clears particles as it cuts. Not every listing states a point angle, so check the listing before buying for a specific angle.

Related: standard drill bit size, best twist drill bit set, best drill bit set for wood and metal, and the metal fab tools hub. Also see the step drill bit vs hole saw for sheet metal guide.

More buying guides