What Size Drill Bit to Tap 8/32: Use the 8-32NC Bit
Use the bit marked 8-32NC: it drills the hole and cuts the thread in one step, and every set in this guide includes it.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
13 Pack Titanium Drill Tap Bit Set9.6/10View on Amazon - 2
Combination Drill & Tap Bit Set9.6/10View on Amazon - 3
Drill & Tap Bits Set of 13 pcs - 6 SAE Sizes9.6/10View on Amazon - 4
AUTOTOOLHOME 6 Pack Titanium Drill Tap Bit Set9.5/10View on Amazon
A small threaded hole in a bracket starts with the right bit. What size drill bit to tap 8/32? Use the bit marked 8-32NC: the combination drill and tap bits in this guide drill the hole and cut the thread in one step, so no separate drill size is needed. The sets below all include the 8-32NC bit, with SAE and metric sizes beside it for the next job.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

13 Pack Titanium Drill Tap Bit Set
A 13-piece SAE and metric set in HSS 4341 with titanium coating, 4-in-1 bits that drill, tap, deburr and countersink, with a case and quick change holder.
Pros
- SAE 6-32NC to 1/4-20NC and metric M3 to M10
- 4-in-1: drill, tap, deburr and countersink in one step
- HSS 4341 with titanium coating for wear resistance
- 1/4 in hex shank, quick change holder, swivel case
Cons
- No warranty term is stated
- Metric sizes listed as a range only
- No stated thickness limit for sheet metal
- No cutting tips or oil guidance stated

Combination Drill & Tap Bit Set
A 13-piece SAE and metric set in HSS with titanium coating, 3-in-1 bits that drill, tap and countersink, with a quick-change adapter and case.
Pros
- SAE 6-32NC to 1/4-20NC and metric M3 x 0.5 to M10 x 1.5
- Titanium coated HSS for metal work
- 1/4 in hex shank quick-change adapter included
- Cutting tips stated: go slow, use oil, back out
Cons
- No warranty term is stated
- No deburring step, unlike the AUTOTOOLHOME 13-pack
- No case dimensions stated
- Sheet metal limit stated: up to 1/4 inch thick

Drill & Tap Bits Set of 13 pcs - 6 SAE Sizes
A 13-piece SAE and metric set in HSS with black oxide coating, 3-in-1 bits that drill, tap and countersink, with a quick-change adapter and labeled case.
Pros
- SAE 6-32NC to 1/4-20NC and metric M3 x 0.5 to M10 x 1.5
- Storage case with clearly labeled compartments
- 1/4 in hex shank quick-change adapter included
- Cutting tips stated: go slow, use oil, back out
Cons
- No warranty term is stated
- No deburring step, unlike the AUTOTOOLHOME 13-pack
- Black oxide coating rather than titanium
- Sheet metal limit stated: up to 1/4 inch thick

AUTOTOOLHOME 6 Pack Titanium Drill Tap Bit Set
A 6-piece SAE-only set in HSS4341 with titanium coating for metal threading, drilling, tapping, countersinking and deburring in one step (deburring per the title).
Pros
- SAE 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20 UNC in one set
- HSS4341 with titanium coating for hardness and wear resistance
- Made for steel plates, aluminum, industrial fabrication
- Drill, tap, countersink, deburr in one step, per the title
Cons
- No warranty term is stated
- SAE sizes only, no metric sizes
- No quick-change adapter or storage case stated
- No cutting tips or oil guidance stated
What size drill bit to tap 8/32: the short answer
The answer is the bit marked 8-32NC. Every set in this guide includes one, and the bit drills the hole, taps the thread and countersinks in one step. Pick it from the set, run it slow with cutting oil, and the hole comes out threaded for an 8-32 screw.
The sets also cover the sizes around it: 6-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC in SAE, plus M3 to M10 in metric on the 13-piece sets.
How a combination drill and tap bit works
A combination bit drills the hole and cuts the thread in the same pass, then countersinks the top, so the job needs no bit change and no separate tap. The AUTOTOOLHOME 13-pack adds deburring to the same pass. The 13-piece sets list a 1/4 in hex shank with a quick-change adapter and pack the bits in a storage case.
The DKIBBITH listings give the method: go slow, do not force the bit, use ample cutting oil, cut and back out a little, and drill a pilot hole first on tougher metals.
SAE and metric sizes in the sets
The 8-32NC bit is the one this guide is about, and every set here includes it. The 6-pack covers SAE sizes only, while the 13-piece sets add metric sizes from M3 to M10.
| Thread | Sets that include it |
|---|---|
| 8-32NC | All 4 sets |
| 6-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC | All 4 sets |
| M3 x 0.5 to M10 x 1.5 | The 13-piece sets |
Side by side
| Thread sizes | Pieces | Functions | Shank | |
|---|---|---|---|---|
| AUTOTOOLHOME 13-Pc | SAE 6-32NC to 1/4-20NC, Metric M3-M10 | 13 | Drill, tap, deburr, countersink | 1/4 in hex, quick change |
| DKIBBITH Titanium 13 | SAE 6-32NC to 1/4-20NC, Metric M3 to M10 | 13 | Drill, tap, countersink | 1/4 in hex, quick-change adapter |
| DKIBBITH Black 13-Pc | SAE 6-32NC to 1/4-20NC, Metric M3 to M10 | 13 | Drill, tap, countersink | 1/4 in hex, quick-change adapter |
| AUTOTOOLHOME 6-Pc SAE | SAE 6-32 to 1/4-20 UNC | 6 | Drill, tap, countersink, deburr (title) | Not stated |
The drill and tap sets for this guide
The 8-32NC bit is the one the job needs, and the sets below all include it: pick the set whose size range and coating match the work.
What goes wrong
- Forcing the bit. Go slow and do not force the bit, or it snaps or strips the thread. Cut and back out a little.
- No cutting oil. Dry tapping tears the thread, so use ample cutting oil.
- Skipping the pilot hole on tough metal. Drill a pilot hole first on tougher metals.
- Wrong size. A bit not marked 8-32NC cuts the wrong thread, so check the marking first.
FAQ for welders
What size drill bit do I need to tap 8-32?
Use the bit marked 8-32NC. The combination bits here drill the hole and cut the thread in one step, so no separate drill size is needed.
Do I need a separate tap for 8-32 threads?
No. A combination drill and tap bit drills, taps and countersinks in one step. The AUTOTOOLHOME 13-pack also deburrs in the same pass.
What materials can I tap with these bits?
The DKIBBITH listings state sheet metal up to 1/4 inch, copper, brass, aluminum and plastic. The AUTOTOOLHOME 6-pack states steel plates and aluminum, and the 13-pack states copper, aluminum, sheet metal, mild steel and plastic.
How do I keep a drill and tap bit from breaking?
Go slow, do not force the bit, use ample cutting oil, and cut and back out a little. Drill a pilot hole first on tougher metals.
Do the sets include metric sizes too?
The 13-piece sets include metric sizes from M3 to M10 beside the SAE sizes. The AUTOTOOLHOME 6-pack covers SAE sizes only.
Related: types of drill bit, standard drill bit size, titanium vs black oxide drill bits, best twist drill bit set and the metal fab tools hub.




