Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Center Drill Bit Sizes: Chart and Hole Guide

Center drill bit sizes set the pilot and body of the drill that starts a hole on the lathe, and this guide explains the chart, the angles and the materials behind each size.

Center Drill Bit Sizes: Chart and Hole Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ZELCAN 10 Sizes Titanium Step Drill BitZELCAN 10 Sizes Titanium Step Drill BitView on Amazon
  2. 2NordWolf 14-Piece M35 Cobalt Drill Bit SetNordWolf 14-Piece M35 Cobalt Drill Bit SetView on Amazon
  3. 35PC Countersink Bits for Steel5PC Countersink Bits for SteelView on Amazon
  4. 44-Piece Center Punch Set with Sizes 1/32"-4/32" Hardened4-Piece Center Punch Set with Sizes 1/32"-4/32" HardenedView on Amazon

A lathe job starts with a small dimple in the end of the bar, and that dimple decides whether the work runs true between centers or wanders off line. Center drill bit sizes describe the pilot and body of that short, stiff drill, and the right size leaves a clean seat for the center while the wrong size leaves a shallow mark or a hole too wide for the work. This guide explains the size numbers, the chart behind them, and how to match a size to the work on the bench.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Center drill bit sizes at a glance

A center drill has a small pilot at the tip and a wider body behind it, and the size number names the pilot and the body together. The pilot cuts the hole, the body cuts the cone that the center sits in, and the 60-degree angle of the cone matches the center. Metric sets list sizes by pilot diameter, with the DKIBBITH 7-piece set listing 1.0, 1.5, 2.0, 2.5, 3.0, 4.0 and 5.0, while the DKIBBITH long set lists 1.0, 2.0, 3.0, 4.0 and 5.0. Imperial sets use numbers instead, with the toolant set listing #1 3/64, #2 5/64, #3 7/64, #4 1/8 and #5 3/16, and the Accusize set listing the same range from 3/64 to 3/16.

Side by side

Size Pilot Body Overall length
No.1 3/64 1/8 1-1/4
No.2 5/64 3/16 1-7/8
No.3 7/64 1/4 2
No.4 1/8 5/16 2-1/8
No.5 3/16 7/16 2-3/4

The Accusize listing states the chart behind the table: overall length runs from 1-1/4 for No.1 to 2-3/4 for No.5, and the pilot grows with the body, so a larger number means a larger hole and a larger cone.

When a small center drill fits the job

  • Small bar ends. A small pilot leaves a small seat in the end of a slim bar, with enough wall around the hole to hold the center.
  • Delicate work. The DKIBBITH long set notes that its bits are reliable in delicate materials like electronics.
  • Starting holes for larger bits. A center drill makes a starter hole that keeps a larger twist drill from wandering. The best twist drill bit set guide covers twist drills for the next step.
  • Dowel work and countersinks. The DKIBBITH long set lists countersinks for screws, bolts or dowels among its uses, and a small size keeps the countersink in proportion to the fastener.

When a large center drill fits the job

  • Heavy bar ends. A large pilot and a wide body cut a seat that fits a large center, and the cone carries the weight of the work between centers.
  • Wide diameter range across the set. The toolant listing states that its set suits material with diameters of 3/16 inch (5 mm) to 5 inch (130 mm), a range for the whole set rather than for one size.
  • Large seats for large centers. The No.5 size has a 3/16 pilot and a 7/16 body, the widest in the Accusize chart, so it cuts the widest seat in the set.
  • Countersinking for large fasteners. A large center drill cuts a 60-degree countersink, with the body setting the width of the cone.

How to read a center drill size

Metric sizes read as pilot diameters, so the number on the bit is the width of the hole it cuts. Imperial sizes read as a number from #1 to #5, and the chart gives the pilot and body behind each number. The DKIBBITH 7-piece set is listed as a short set, while the DKIBBITH long set lists a 4-inch overall length.

  • Metric. Sizes 1.0, 1.5, 2.0, 2.5, 3.0, 4.0 and 5.0, listed by the DKIBBITH 7-piece set.
  • Imperial. Sizes #1 to #5, with pilots from 3/64 to 3/16, listed by the toolant and Accusize sets.
  • Overall length. Overall length from 1-1/4 to 2-3/4 in the Accusize chart, and a 4-inch overall length in the DKIBBITH long set.
  • Sets and spares. The toolant set holds 6 pieces, with an extra #1 in the case.

Which angle and material to look for

The 60-degree angle is the standard on the DKIBBITH and Accusize listings here, and the Accusize listing states that the 60-degree countersink angle fits all standard centers. The toolant set lists a 118-degree split point at the pilot tip, which the listing states prevents walking and makes drilling precise. The DKIBBITH sets use M2 high speed steel, the toolant set uses M35 cobalt high speed steel with 5% cobalt and a TiAlN coating, and the Accusize set uses M42 high speed steel with 8% cobalt. The DKIBBITH 7-piece set lists steel, iron, aluminum, carbon steel and brass, with a hardness range from 170HB to 200HB, and the toolant set lists stainless steel, carbon steel, alloy steel, cast iron, copper and other hard metals. The DKIBBITH long set notes low speed and lubrication for stainless steel, and the toolant set lists a 90-day warranty.

Cobalt sets suit hard metals; see the best cobalt drill bit set guide and the best countersink bit cobalt guide.

Can a set cover lathe and mill work?

Yes, and the listings here describe that use. The DKIBBITH sets state work with lathe machines and most electronic drills, and the DKIBBITH long set adds milling and woodworking to the list. The toolant set states use with most lathe machines and power drills. To choose the drill that follows the center hole, see step drill bit vs twist drill bit.

Chips and sharp edges. Center drills cut hard metal and throw sharp chips, so eye protection and a clear bench matter on every hole. Clamp the work, keep hands clear of the spinning bit, and clear chips with a brush, not with a bare hand.

FAQ for welders

Which center drill size fits the work?

Match the pilot to the work and check the chart. Small work takes a small pilot, such as 1.0 or 1.5 in metric sizes or #1 with a 3/64 pilot, while large work takes a large pilot, such as 5.0 in metric sizes or #5 with a 3/16 pilot.

What does the 60-degree angle mean on a center drill?

The 60-degree angle is the included angle of the cone that the drill cuts, and it matches the angle of the center that sits in the cone. The Accusize listing states that the 60-degree countersink angle fits all standard centers.

What is the difference between a #1 and a #5 center drill?

The #1 size has a 3/64 pilot, a 1/8 body and a 1-1/4 overall length, while the #5 size has a 3/16 pilot, a 7/16 body and a 2-3/4 overall length. The #5 size cuts a larger hole and a larger cone, so it fits larger work and larger centers.

Can a center drill start a hole for a larger drill bit?

Yes. The DKIBBITH listing states that a 60-degree center drill cuts starter holes for larger drill bits in metalworking, and the long set states that center drills create a precise starting point for subsequent drilling.

Do center drills work on stainless steel?

Yes, with the right material and care. The toolant set uses M35 cobalt high speed steel with a TiAlN coating and lists stainless steel among the metals it suits, and the DKIBBITH long set notes low speed and lubrication for stainless steel.

Related: standard drill bit size, best twist drill bit set, best drill bit set for wood and metal, and the metal fab tools hub.

More buying guides