How to Powder Coating at Home: Equipment and Steps
How to powder coating at home: prep and mask the part, spray it with a powder gun, and bake the finish, with four kits that cover each step.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Eastwood Hotcoat PCS-250 Powder Coating System9.6/10View on Amazon - 2
VEVOR Powder Coating System9.6/10View on Amazon - 3
Hosile Powder Coating System9.5/10View on Amazon - 4
Wokape 105Pcs Powder Coating Plug Kit with PET9.5/10View on Amazon
A steel bracket with chipped paint, a wheel that needs a fresh coat, a frame that has to survive winter road salt: those jobs push a home shop toward powder coating. How to powder coating at home comes down to four steps: prep the metal, mask what stays bare, spray charged powder onto a grounded part, and bake the finish until it flows and hardens.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Eastwood Hotcoat PCS-250 Powder Coating System
A dual-voltage powder coating gun with a 25kV output, minimal overspray, a larger ground clamp and an 8-oz clear bottle.
Pros
- Dual-voltage system with a 25kV output
- Minimal overspray and a larger ground clamp
- Lifetime tech support stated
- 1-year limited warranty and 90-day return
Cons
- No powder included; the bottle ships empty
- No weight is stated in the listing
- No voltage steps are listed, unlike the VEVOR
- Single bottle, so color changes need cleaning

VEVOR Powder Coating System
A 50KV electrostatic powder coating kit with 5 speeds from 30 to 50KV, 2 powder bottles, a foot pedal and a carrying handle.
Pros
- 50KV output, the highest here
- 5 voltage speeds from 30 to 50KV
- 2 powder bottles, switch colors without cleaning
- Foot pedal and button switches, plus a carrying handle
Cons
- No warranty term is stated on this listing
- No moisture separator is listed
- No masking plugs or tape are included
- No voltage below 30KV is listed

Hosile Powder Coating System
A dual-voltage powder coating kit with 20Kv and 50Kv outputs, 2 powder bottles and a footswitch.
Pros
- Dual voltage: 20Kv and 50Kv outputs
- 2 powder bottles with different nozzles
- Moisture separator and grounding clip included
- Control box and diffuser nozzles included
Cons
- No weight is stated in the listing
- No dimensions are stated
- No voltage steps between 20Kv and 50Kv are listed
- No powder included in the kit

Wokape 105Pcs Powder Coating Plug Kit with PET
A masking kit with 100 high-temp silicone plugs in 8 sizes and 5 colors, plus 4 rolls of PET tape in 4 sizes.
Pros
- 100 plugs in 8 sizes and 5 colors
- 4 rolls of PET tape in 4 sizes, 36 yards
- Tape rated to 428 F for baking
- 15-grids storage box included
Cons
- No warranty term is stated on this listing
- Plugs only mask holes from 1/16 inch to 3/4 inch
- Covers masking only, not spraying
How to powder coating at home, in short
Powder coating at home means spraying dry powder onto clean, grounded metal with an electrostatic gun, then baking the part so the powder melts and hardens into a tough skin. Mask the holes and threads that must stay bare first and keep the part grounded while you spray. The four kits below run from a 25kV gun to a 50KV system, plus the masking kit that keeps threads clean.
The four kits side by side
| Eastwood PCS-250 | VEVOR 50KV System | Hosile Dual Voltage | Wokape Plug Kit | |
|---|---|---|---|---|
| Output voltage | 25kV system | 50KV, 5 speeds | 20Kv and 50Kv | No gun |
| Powder bottles | 1 bottle, 8-oz | 2 bottles | 2 bottles | None |
| Foot switch | Activation switch | Foot pedal, button | Footswitch | None |
| Masking plugs and tape | Not included | Not included | Not included | 100 plugs, 4 rolls |
| Warranty | 1-year limited | Not stated | One Year | Not stated |
| Gear Score | 68 | 63 | 60 | 59 |
Three guns and one masking kit: the VEVOR runs the highest output at 50KV, and a one-year warranty is stated on the Eastwood and the Hosile.
How to powder coating at home, step by step
Prep the metal
Strip the old finish and clean the metal bare: powder sticks to clean metal and lifts off grease, rust and loose paint.
Mask what stays bare
Push silicone plugs into holes from 1/16 inch to 3/4 inch and run PET tape over threads and edges. The tape stands up to 428 F in the oven, so it stays put through the bake.
Spray the powder
Ground the part, fill a bottle with powder, and spray in smooth, even passes. The Eastwood gun runs dual-voltage with minimal overspray, the VEVOR steps through 5 speeds from 30 to 50KV, and the Hosile switches between 20Kv and 50Kv. Two bottles, on the VEVOR and Hosile kits, let you change colors without cleaning between them.
Bake the finish
Set the coated part in the oven and bake it until the powder flows into a smooth skin and hardens. Let the part cool before handling it, then pull the plugs and tape and check the threads.
Powder is fine dust. Work with ventilation, keep the powder away from sparks and open flame, and ground the part before spraying. Wear a respirator and eye protection while spraying. If the setup needs fixed wiring, use a licensed electrician.
The kits for the job
Spraying the powder is the step that needs the gun, and masking is the step that needs the plugs and tape. The four kits below are ranked by how much they bring to those steps.
FAQ for welders
What voltage does a powder coating gun need?
It depends on the gun: the VEVOR steps through 5 speeds from 30 to 50KV, the Hosile switches between 20Kv and 50Kv, and the Eastwood runs a dual-voltage 25kV system. Match the setting to the part and the powder.
Do I need to mask threads before powder coating?
Yes. Powder that lands in a threaded hole hardens there and the fastener will not fit. The Wokape kit (on Amazon) covers holes from 1/16 inch to 3/4 inch, and the PET tape covers threads and edges.
How durable is a powder coat?
The Eastwood listing says the finished coat resists most chemicals, fuels, acids, thinners, brake fluid and UV light, and calls it up to ten times more durable than liquid coatings. The VEVOR listing says the same, at 10 times more durable than liquid coatings.
Can I switch powder colors quickly?
Yes, with two bottles: the VEVOR and Hosile kits each include 2 powder bottles, so each bottle holds one color and you swap bottles instead of cleaning. The Eastwood kit ships with one empty 8-oz bottle, so a color change means cleaning it first.
What comes in a powder coating kit?
It varies: the Hosile kit (on Amazon) lists a spray gun, 2 powder cups, a moisture separator, a control box, a grounding clip, a footswitch and diffuser nozzles, while the Eastwood kit lists a gun, a power supply, an activation switch, a ground clamp and cable, and an empty 8-oz bottle.
Related: best powder coating gun for home use, best large sandblasting cabinet. Browse the metal fab tools hub.




