Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best TIG Torch Under 80 (2026)

Best TIG torch under $80: three options compared by amperage, cable, head type, connector and warranty, with a complete 150-amp torch on top.

Best TIG Torch Under 80 (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1bestarc WP-17FV TIG TorchFlexible head, gas valvebestarc WP-17FV TIG Torch9.4/10View on Amazon
  2. 2Rstar WP17 TIG Welding TorchComplete torch, M16 connectorRstar WP17 TIG Welding Torch9.3/10View on Amazon
  3. 3RIVERWELD WP-9F TIG Torch HeadHead body onlyRIVERWELD WP-9F TIG Torch Head9.2/10View on Amazon

Verdict: The best tig torch under 80 dollars is the bestarc WP-17FV: a complete 150-amp air-cooled torch with a 13-foot cable, flexible head and gas valve. The Rstar WP17 is the close second with the same 13-foot reach and a 150-amp DC rating. The RIVERWELD WP-9F is a 125-amp flexible head body only.

The best tig torch under 80 dollars does not have to be a compromise. A TIG torch is mostly copper, cable and a head; under $80 buys you a complete 150-amp air-cooled torch with a 13-foot cable. We compared three options by amperage, cable, head type, connector and warranty, then ranked them by our Shop Score.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Flexible head, gas valve bestarc WP-17FV TIG Torch: 150A, 13 ft, flexible head, gas valve Check price on Amazon
  • Complete torch, M16 connector Rstar WP17 TIG Welding Torch: 150A DC/120A AC, 13 ft, M16 connector Check price on Amazon
  • Head body only RIVERWELD WP-9F TIG Torch Head: 125A flexible head body Check price on Amazon

The machines

Bestarc TIG Welding Torch

Bestarc TIG Welding Torch

bestarc9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A complete 150-amp air-cooled TIG torch with a 13-foot cable, flexible head, gas valve and 10-25mm quick plug, ready to install on a compatible welder.

Pros

  • 150 A air cooled, complete torch
  • 13 ft cable plus 3.2 ft gas hose
  • Flexible head with gas valve
  • 10-25mm quick plug connector

Cons

  • No warranty stated in the listing
  • Rigid cable needs room to move
  • Verify the 10-25 plug fits your welder
  • No duty cycle stated
WP17 TIG Welding Torch Air-Cooled 13 Feet Cable

WP17 TIG Welding Torch Air-Cooled 13 Feet Cable

Rstar9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A complete WP17 TIG torch with 150A DC and 120A AC ratings, a 13-foot cable and an M16 by 1.5 connector, ready to install on a compatible welder.

Pros

  • 150 A DC, 120 A AC rating
  • 13 ft cable with M16 connector
  • Complete assembly, ready to install
  • Copper material construction

Cons

  • No warranty stated in the listing
  • Rigid head, not flexible
  • M16 connector limits welder fit
  • No duty cycle stated
RIVERWELD WP-9F SR-9F TIG Welding Torch Head Body

RIVERWELD WP-9F SR-9F TIG Welding Torch Head Body

RIVERWELD9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A RIVERWELD WP-9F flexible head TIG torch body rated 125 amps air cooled, a replacement head for repair or custom builds.

Pros

  • 125 A flexible head body
  • Air cooled, copper and brass
  • Adjusts to welding angles
  • Compact 2.46 oz head

Cons

  • Head body only: no cable or connector
  • No warranty stated in the listing
  • 125 A is the lowest rating here
  • No accessories included

Other welders and gear to compare

Spec sheet comparison

Torch Shop Score Type Rated amps Cable Head Warranty
bestarc WP-17FV TIG Torch 9.4/10 Complete torch, air cooled 150 A 13 ft Flexible Not stated
Rstar WP17 TIG Welding Torch 9.3/10 Complete torch, air cooled 150 A DC / 120 A AC 13 ft Rigid Not stated
RIVERWELD WP-9F TIG Torch Head 9.2/10 Head body only, air cooled 125 A Not stated Flexible Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 October 2026. Read each listing’s fine print before buying: one pick is a head only.

Buying guide: the best TIG torch under 80

Torch vs head

Know what you are buying. The bestarc WP-17FV and Rstar WP17 are complete torch assemblies: head, cable and connector, ready to install on a compatible welder. The RIVERWELD WP-9F is a head body only, a 125-amp flexible head for repair or custom builds, with no cable. If you need a torch to weld with today, buy a complete torch.

Amperage: 125 vs 150

The complete torches rate 150 amps: the bestarc at 150 amps air cooled, the Rstar at 150 amps DC and 120 amps AC. The RIVERWELD head rates 125 amps. For sheet metal and thin tube at low amps, all three work; for thicker sections near the top of the range, the 150-amp torches have more headroom.

Cable length and connectors

Both complete torches come with 13-foot cables, so you can weld at a distance without moving the argon tank. The connectors differ and this is where purchases go wrong: the bestarc uses a 10-25mm squared quick plug with a 5/8-18 RH gas line connection, while the Rstar uses an M16 by 1.5 thread connector with a two-pin socket. Check your welder’s rear socket before ordering; the listings are explicit about the interfaces because a torch with the wrong plug is a paperweight. The bestarc also includes a 3.2-foot gas hose.

Air cooled and flexible heads

All three are air cooled, which avoids a water cooler to buy or maintain. The bestarc and RIVERWELD have flexible heads that adjust to welding angles, which helps in tight joints; the Rstar head is rigid. The bestarc adds a gas valve on the torch for adjustment at the handle, plus a ribbed ergonomic handle the listing says reduces fatigue. Electrode range is 0.5 to 2.4 mm on the bestarc and 0.02 inch to 3/32 inch on the Rstar.

What the listings leave out

None of the three states a warranty. No listing states a duty cycle, so sustained high-amp performance is unrated. The bestarc listing claims compatibility with Bestarc MIG145, MIG165 and ARC200 welders and most MIG welders, and the Rstar is described as fitting most Chinese and European welders, but both listings tell you to verify the connector yourself. Do that before ordering.

[wgl_safety kind=”welder”]

Setting up your first TIG torch

Order the torch, then check the rest of the chain before it arrives. Confirm the connector against your welder’s rear socket: 10-25mm squared quick plug on the bestarc, M16 by 1.5 with a two-pin socket on the Rstar. Fit the right tungsten for the electrode range, 0.5 to 2.4 mm on the bestarc or 0.02 inch to 3/32 inch on the Rstar. The bestarc’s 13-foot cable plus 3.2-foot gas hose means the argon tank stays put while you work at a distance; plan the gas line routing so it never pulls on the torch. If you bought the RIVERWELD head for a custom build, pair it with a cable and handle rated for its 125 amps. And stock consumables from day one: cups, collets and gas lenses are the parts you will reach for first.

Matching the torch to your welder

The connector is the decision that cannot be fixed after delivery, so verify it against your machine before ordering. The bestarc WP-17FV connects through a 10-25mm squared quick plug with a 5/8-18 RH gas line connection, and its listing names the Bestarc MIG145, MIG165 and ARC200 plus most MIG welders as compatible. The Rstar WP17 uses an M16 by 1.5 thread connector with a two-pin socket, and its listing describes fit with most Chinese and European welders while telling you to verify the M16 interface size matches your welder. These two plugs are not interchangeable, so a torch ordered without checking the plug can become a return. Next, match the electrode range to the tungsten you run: the bestarc takes 0.5 to 2.4 mm electrodes, the Rstar takes 0.02 inch to 3/32 inch, and both ranges cover the common tungsten sizes for sheet and tube work. The bestarc is an argon torch with lift TIG function and a torch-side gas valve, and it ships a 3.2-foot gas hose alongside the 13-foot power cable, so the argon routing is part of the setup, not an afterthought. If you are replacing only a worn head, the RIVERWELD WP-9F is a 125-amp flexible head body in copper and brass at 2.46 ounces, with no cable or connector, which suits a repair where the cable and handle are still good.

FAQ for welders

What is the best TIG torch under $80?

The bestarc WP-17FV: a complete 150-amp air-cooled torch with a 13-foot cable, flexible head and gas valve, the most torch for the money here.

What does the RIVERWELD WP-9F include?

A 125-amp flexible head body only, no cable. It is a replacement head, not a complete torch.

Which connector do I need?

Check your welder: the bestarc uses a 10-25mm squared quick plug, the Rstar uses M16 by 1.5 with a two-pin socket. The listings tell you to verify the interface before buying.

Are these torches water cooled?

No. All three are air cooled, which avoids a water cooler.

Do any of these have a warranty?

No. None of the three states a warranty.

Related: the best TIG torch roundup and the WP-17 vs WP-26 TIG torch comparison.

Scoring, line by line

Each example is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. The two complete torches lead on usable specs, and the head-only RIVERWELD scores for what it is: a replacement head, not a torch.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
bestarc WP-17FV TIG Torch 9.4 29 19 16 0 0
Rstar WP17 TIG Welding Torch 9.3 28 18 16 0 0
RIVERWELD WP-9F TIG Torch Head 9.2 26 16 15 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides

Welders ·

TIG Torch Set Up: Step-by-Step Guide

Tig torch set up means fitting the collet body or gas lens, collet and cup in order, connecting the gas, and checking the torch…