TIG Welding Torch Types and Which to Choose
Air-cooled and water-cooled TIG torches differ in cooling, amperage and cable, and the head and gas valve decide how the torch fits the job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN 49 Pcs TIG Welding Torch Accessories Kit for9.6/10View on Amazon - 2
Alffun 68pcs TIG Torch Consumables Accessories KIT9.6/10View on Amazon - 3
YESWELDER 49Pcs TIG Welding Torch Stubby Gas Lens #10 Glass9.6/10View on Amazon
A thin stainless patch on a cracked bracket, a bead that has to land in a tight corner, and a torch that gets too hot to hold halfway through the joint: that is when the torch itself becomes the problem, and tig welding torch types are the place to start. Air-cooled and water-cooled torches, rigid and flexible heads, and heads with a gas valve cover the choices, and this guide explains each one and how to match it to the welder.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
TIG Welding Torch Types in One Paragraph
A TIG torch carries the tungsten, the shielding gas and the arc to the joint, and the types split by cooling, by head, and by gas control. Air-cooled torches shed heat into the air around the torch body, water-cooled torches circulate water through the torch, flexible heads bend to reach tight joints, and a gas valve on the torch head controls the gas at the torch instead of at the machine. The torch has to match the welder’s output stud and the work, so the sections below take each split in turn.
Side by side
| Air-cooled torch | Water-cooled torch | Torch with gas valve | |
|---|---|---|---|
| Cooling | Air around the torch body | Water circulated through the torch | Air around the torch body |
| Amperage | CK17 rated 150 amp; WP-26 rated 200 amp | Suits higher amperage work | Matches the torch body it fits |
| Cable | 12.5 ft power cable hose; WP-26 also in 25 ft | Water hoses plus a power cable | Cable matches the torch body |
| Head | Regular or flexible head | Regular or flexible head | Head with a gas valve |
| Gas on/off | Switched at the machine | Switched at the machine | Switched by the valve on the torch |
| Best for | Home and shop work at moderate amperage | Long runs at high amperage | Machines without a gas solenoid |
The ratings in the table come from the CK17 at 150 amp and the WP-26 at 200 amp, so read the rating on any torch against the work it will do.
Air-cooled torches
Air-cooled torches need no water lines and no cooler: the torch body sheds heat into the air. The CK17 kit is rated 150 amp ACHF or DCSP at 100%, with a 12.5 ft Super-Flex cable, and the torch measures 8-1/8 in long and weighs 5 oz. The WP-26 package is rated 200 amp, with a 12.5 ft or 25 ft power cable hose, and the package lists 5.0 lb. Air-cooled torches suit work at or below their rated amperage, and the cable length decides how far the torch reaches from the machine.
Water-cooled torches
A water-cooled torch circulates water through the torch body, so it holds a steady temperature through long runs at high amperage. The trade is more gear: water hoses, a cooler and a torch built for water, against an air-cooled torch that needs nothing beyond the cable. Where the work runs long and the amperage runs high, water cooling keeps the torch in the hand; where the work is short and the amperage is moderate, air cooling is the simpler setup.
Flexible heads and gas valves
The head is the working end, and it comes rigid or flexible. The WP-26 comes in a regular head, a flexible head, a head with a gas valve, and a flexible head with a gas valve, so the head can bend toward a tight joint and the valve can sit on the torch. A flexible head helps where the joint sits at an angle the torch body cannot reach straight on. A gas valve on the torch head matters when the machine has no gas solenoid: the valve starts and stops the gas at the torch, so the gas does not run between welds.
Matching a torch to your welder
A torch has to fit the welder before it fits the work. The WP-26 package ships with a brass cable adapter that connects the torch to the gas tank and the welding machine with a standard 1/2 in threaded output stud, and the package includes 1/16 in and 3/32 in collets with collet bodies, ceramic cups and back caps. Check the output stud on the welder, the gas connection and the collet sizes against the torch package before ordering, and check the welder for matching: a torch that does not fit the machine does not weld.
Hot metal, arc flash and shielding gas. TIG welding throws arc light, hot metal and fumes, so wear a welding helmet and gloves, keep the work area clear of anything flammable, and weld with ventilation or outdoors with your head out of the plume. Secure gas cylinders upright with a chain, and check the machine manual for the settings and polarity the torch needs.
For more options, see our welders guides.
FAQ for welders
What is the difference between air-cooled and water-cooled TIG torches?
An air-cooled torch sheds heat into the air around the torch body, while a water-cooled torch circulates water through the torch. Air-cooled torches need no water lines or cooler, and water-cooled torches hold a steady temperature through long runs at high amperage.
What does a gas valve on a TIG torch do?
It starts and stops the shielding gas at the torch head instead of at the machine. The WP-26FV pairs a flexible head with a gas valve, so the gas can be controlled at the torch when the machine has no gas solenoid.
What is a flexible head TIG torch?
It is a torch whose head bends to reach a joint the torch body cannot reach straight on. The WP-26F is the flexible-head version of the WP-26, and the WP-26FV adds a gas valve to the flexible head.
How do I know which TIG torch fits my welder?
Check the output stud, the gas connection and the collet sizes. The WP-26 package fits a standard 1/2 in threaded output stud and includes 1/16 in and 3/32 in collets, so compare those figures with the welder before ordering.
Can I use a 200-amp torch on a smaller welder?
A torch rated 200 amp can run below its rating, but the torch still has to fit the welder’s output stud and gas connection. Check the welder for matching, and read the rating on the torch against the work it will do.
Related: best TIG torch for pipe welding, TIG torch vs MIG gun, flex head vs rigid TIG torch, and the TIG torch set up guide. Also see our best shielding gas for TIG welding.




