Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Torch Types Compared for Home Shops

Oxy-acetylene, TIG, MIG and plasma torches compared on what each one cuts, welds, brazes and heats, and how to pick the torch that fits the work on your bench.

Welding Torch Types Compared for Home Shops
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 13 Pack LC-40 Welding Leads Quick Connector3 Pack LC-40 Welding Leads Quick Connector9.5/10View on Amazon
  2. 2LC-40 Welding Leads Quick ConnectorLC-40 Welding Leads Quick Connector9.5/10View on Amazon
  3. 3Welding Knight Welding Cable Quick Connector Pair DINSE-StyleWelding Knight Welding Cable Quick Connector Pair DINSE-Style9.4/10View on Amazon

A gate hinge has torn loose from its post and a copper pipe joint waits for braze. The torch in your hand decides which jobs you can take on, because each torch type makes its heat a different way: the oxy-acetylene torch burns fuel gas, the TIG and MIG torches run an electric arc, and the plasma torch cuts with an ionized gas arc instead of welding at all. This guide sorts out welding torch types for home shops: oxy-acetylene, TIG, MIG and plasma, what each type does, and how to pick the torch that fits the work on your bench.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Welding torch types in one paragraph

A welding torch is the handpiece that delivers heat to the joint, and the type names the process behind it. The welding torches feed filler to the joint, while a plasma torch feeds no filler because it cuts instead of welding. An oxy-acetylene torch burns fuel gas with oxygen and works with a hand-fed filler rod, so it can weld, braze, cut, bend and heat with a change of tip. A TIG torch holds a tungsten electrode and feeds filler by hand under shielding gas, which suits clean, precise beads on thin metal. A MIG torch feeds wire through the gun under shielding gas or with flux core wire, which suits fast beads on steel. A plasma torch cuts metal with an ionized gas arc, and it does not weld. The right choice follows the work: what you cut, what you weld, and where you weld it.

Side by side

Oxy-acetylene torch TIG torch MIG torch Plasma cutting torch
Runs on Oxygen and acetylene from cylinders TIG welder, shielding gas and tungsten MIG welder and wire feed Plasma cutter and compressed air
Welds metal Yes, with a welding tip Yes Yes No
Cuts metal Yes, with a cutting tip No No Yes, its main job
Brazes and heats Yes, brazes, bends and heats Limited heating Not its usual job No
Listed cutting capacity Up to 127 mm (5 inches) with optional tips Not stated Not stated Not stated
Listed welding thickness Up to 31.8 mm (1.25 inches) with optional nozzles Not stated Not stated Not stated
Portable kit tanks 4L oxygen tank and 2L acetylene tank Not stated Not stated Not stated
Outdoor work Tolerates a breeze Needs still air for gas shielding Gas MIG needs shelter Works outdoors

Torch handles and tips are not one-size-fits-all. The RX WELD light duty kit (on Amazon) fits 3/8-24 Type A hose fittings and takes W-J series welding nozzles, so check the fitting on your hoses before ordering a handle. The ADsunves MTF-5 brazing tip (on Amazon) fits Uniweld #71 and WH550 handles and suits copper tubing up to 1 inch, which shows how a tip can be tied to a handle family.

When an oxy-acetylene torch is the better choice

  • Cutting and heating. A cutting torch with the right tip slices plate and bar, and a heating tip bends and straightens metal.
  • Brazing copper and brass. The MTF-5 tip wraps the joint in five flames at a 40-degree angle for even heat on copper tubing up to 1 inch, which suits HVAC and refrigeration repair.
  • Work away from power. The torch runs on gas cylinders, so it works on a farm gate or a fence line where there is no outlet.
  • Portable kits. Kits such as the Techimes and Altsuceser outfits carry a 4L oxygen tank and a 2L acetylene tank with regulators, so the whole setup travels in a tote.

Our best oxy acetylene torch kit for home shop guide covers kits for home shops.

When a TIG torch is the better choice

  • Clean beads on thin metal. TIG gives control over heat and filler, which suits sheet and tubing.
  • Metals beyond steel. TIG welds aluminum and stainless with the right setup and gas.
  • Precise starts and stops. A foot pedal or torch switch lets the welder ease the arc in and out.
  • No slag to chip. The bead needs little cleanup after the weld cools.

Our TIG torch set up guide walks through the torch, gas and tungsten, and how to TIG weld aluminum covers the aluminum setup.

How to tell what a torch kit includes

A kit listing should name the handle, the tips, the regulators and the tanks. Look for these in the listing:

  • Tips in the box. The RX WELD light duty kit ships with 3 welding tips, and the Altsuceser kit (on Amazon) ships with 2 welding nozzles and 1 cutting nozzle.
  • Tank sizes. Portable kits list a 4L oxygen tank and a 2L acetylene tank, so check that the tanks suit the torch and that regulators are included.
  • Fittings and valves. The RX WELD handle fits MC-type acetylene tanks with CGA-200 valves and industrial oxygen tanks with CGA-540 valves, so match the valves on your cylinders.
  • Check valves and flashback arrestors. The RX WELD handle includes check valves, and the ADsunves kit includes a flashback arrestor, a flint striker and a tip cleaner.

The Victor Super Range 350 outfit includes SR350 regulators and a cutting torch. Check the listing for hoses, goggles and a striker when they are not in the box, and order them with the kit.

Which gas for oxy-acetylene work

Oxy-acetylene work runs on oxygen and acetylene from separate cylinders, each with its own regulator. The acetylene cylinder feeds the fuel gas, the oxygen cylinder feeds the oxygen the flame and the cutting jet need, and the torch mixes gas from each cylinder at the handle. Portable kits combine a 4L oxygen tank with a 2L acetylene tank. Check the tank valves against the torch fittings before ordering, and keep cylinders upright and chained.

Can one torch handle do it all?

An oxy-acetylene handle can weld, braze, cut and heat with a change of tip, which makes it the most flexible torch for a home shop that does repair work. It will not match a TIG torch for clean beads on thin metal, and it will not cut thin plate as fast as a plasma torch. For most home shops the answer is an oxy-acetylene outfit for cutting, brazing and heating, plus a MIG or TIG torch for welding. See our best MIG nozzle for flux core welding guide.

Oxy-acetylene safety. Cylinders hold gas under pressure, and a flashback can travel back into a hose, so use check valves or flashback arrestors, keep cylinders upright and chained, and keep oil and grease away from oxygen fittings. Wear goggles when cutting and brazing, clear dry grass and anything flammable from the area, and weld with good ventilation or outdoors with your head out of the plume. See our best welding goggles for brazing and best welding jacket guides.

For more options, see our welders guides.

FAQ for welders

What is the most versatile welding torch type for a home shop?

An oxy-acetylene torch is the most flexible choice, because one handle can weld, braze, cut, bend and heat with a change of tip. Portable kits carry their own tanks and regulators, so the torch works away from power.

Can an oxy-acetylene torch weld aluminum?

Oxy-acetylene can weld aluminum with the right flux and filler, but the oxide layer and the soft metal make it hard to control, and most home shops use TIG for aluminum instead. Our guide on how to TIG weld aluminum covers that setup.

What size tanks come with a portable oxy-acetylene kit?

The portable kits in our listings combine a 4L oxygen tank with a 2L acetylene tank, each with its own regulator. Check the tank valves against your torch fittings, since the RX WELD handle fits MC-type acetylene tanks with CGA-200 valves and industrial oxygen tanks with CGA-540 valves.

Do I need a different tip for cutting and welding?

Yes. A welding tip mixes gas for a welding or brazing flame, while a cutting tip adds a jet of oxygen that burns through the metal. The Victor G250 outfit cuts up to 127 mm (5 inches) with optional tips and welds up to 31.8 mm (1.25 inches) with optional nozzles, so the tip decides the job.

Can a TIG torch cut metal?

No. A TIG torch welds, and cutting needs an oxy-acetylene cutting torch or a plasma cutter. A plasma torch cuts plate quickly and cleanly, while an oxy-acetylene torch also heats and bends.

Related: TIG torch set up, best oxy acetylene torch kit for home shop, best propane torch for brazing, and best welding cable under 50.

More buying guides

Metal Fab Tools ·

Oxy Acetylene Torch Types Explained

Cutting, welding, brazing and heating torches all burn the same gases, but each one shapes the flame for a different job.

Welders ·

Welding Cable Connector Types Explained

LC-40 cam-lock sets and DINSE-style pairs compared on amp figure, cable size and pack, so you can match a connector to your leads without…